Jan Beens

Comprehensive two-dimensional gas chromatography: a powerful and versatile analytical tool

Comprehensive two-dimensional gas chromatography (GC x GC) is a novel technique which is rapidly gaining importance for the analysis of complex samples. In the present review, attention is devoted to the principle and advantages, and main characteristics such as modulation, column combinations, detector requirements and data processing, of the technique. Specifically, GC x GC of a variety of real-life samples is discussed to demonstrate the applicability of the technique, with emphasis on the usefulness of the ordered-structure principle and on the analyte-identification power provided by a combination with time-of-flight mass spectrometric detection.

Comprehensive two-dimensional gas chromatography: a hyphenated method with strong coupling between the two dimensions ☆

Comprehensive two-dimensional gas chromatography (GC x GC) provides a true orthogonal separation system. It is explained and demonstrated that it generates a peak capacity that is approximately equal to the product of the peak capacities of the two individual separation systems. The resulting peaks are ordered in a two-dimensional plane in bands of compounds with the same characteristics. Quantitation of the separated (groups of) components is fundamentally not different from one-dimensional gas chromatography, but the sensitivity is far better and true baseline is always available. The two co-ordinates of each peak in the plane make the identification more reliable. Instrumental considerations of GC x GC are discussed. The three designs of contemporary GC x GC systems are presented and compared. Although the technique is still very young, a number of applications on complex samples as petroleum and environmental samples have already been reported. Finally, the future perspectives of GC x GC are discussed.

Recent developments in the application of comprehensive two-dimensional gas chromatography

The literature on comprehensive two-dimensional gas chromatography (GC x GC) is reviewed, with emphasis on application-oriented studies published in the period 2004-2006. The various strategies that can be used in such studies, the state-of-the-art analytical performance and the high potential of GC x GC combined with time-of-flight mass spectrometric detection are highlighted.

Comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometric detection applied to the determination of pesticides in food extracts

The separation provided by conventional gas chromatography (1D-GC) can be significantly enhanced by using comprehensive two-dimensional GC (GC X GC) instead. Combination with mass spectrometric detection is desirable for unambiguous confirmation of target compounds and the provisional identification of unknowns. A GC X GC system using a cryogenic modulator was coupled to a time-of-flight mass spectrometric (TOF MS) detector. With the determination of pesticides in vegetable extracts as an example, it was demonstrated that GC X GC improves the separation dramatically. All 58 pesticides of interest could be identified using their full-scan mass spectra, which was not possible when using ID-GC-TOF MS. In addition, the high scan speed of the TOF MS allowed the deconvolution of compounds partly co-eluting in GC X GC.

Unravelling the composition of very complex samples by comprehensive gas chromatography coupled to time-of-flight mass spectrometry - Cigarette smoke

The potential and current limitations of comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GC x GC-TOF-MS) for the analysis of very complex samples were studied with the separation of cigarette smoke as an example. Because of the large number of peaks in such a GC x GC chromatogram it was not possible to perform manual data processing. Instead, the GC-TOF-MS software was used to perform peak finding, deconvolution and library search in an automated fashion; this resulted in a peak table containing some 30000 peaks. Mass spectral match factors were used to evaluate the library search results. The additional use of retention indices and information from second-dimension retention times can substantially improve the identification. The combined separation power of the GC x GC-TOF-MS system and the deconvolution algorithm provide a system with a most impressive separation power.

Simple, non-moving modulation interface for comprehensive two-dimensional gas chromatography.

A simple, non-moving dual-stage CO2 jet modulator is described, which cools two short sections of the front end of the second-dimension column of a comprehensive two-dimensional gas chromatograph. A stream of expanding CO2 is sprayed directly onto this capillary column to trap small fractions eluting from the first-dimension column. Remobilization of the trapped analytes is performed by direct heating by the GC oven air. Installation, maintenance and control of the modulator is simple. Focusing and remobilization of the fractions is a very efficient process, as the bandwidths of the re-injected pulses are less than 10 ms. As a result, alkane peaks eluting from the second-dimension column have peakwidths at the baseline of only 120 ms.

Optimization and characterization of comprehensive two‐dimensional gas chromatography with time‐of‐flight mass spectrometric detection (GC×GC–TOF MS)

The influence of modulator temperature, modulation frequency, temperature programming rate, and carrier gas velocity on the performance of comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GC×GC–TOF MS) was studied. The system was characterized with respect to the repeatability of peak areas and retention times of selected analytes, their detection limits, and the linearity of their calibration plots. The system was found to be linear in the 0.01–3 ng range, and detection limits for the pesticides were between 5 and 23 pg. The performance of the system was compared with that of conventional one-dimensional (1D) GC–TOF MS, the advantages of TOF MS for identification and deconvolution are discussed, and several approaches for the processing of GC×GC–TOF MS data are explained with the emphasis on (semi)-automated data processing and the differences with 1D-GC–TOF MS.

Comprehensive two-dimensional gas chromatography with time-of-flight mass spectrometric detection for the trace analysis of flavour compounds in food

The practicability and potential of comprehensive two-dimensional gas chromatography coupled to time-of-flight mass spectrometry (GC x GC-TOF-MS) for the analysis of complex flavour mixtures in food were studied. With the determination of key flavour targets in dairy samples as an example, it was demonstrated that GC x GC dramatically improves the separation. As a consequence, identification and, more importantly, quantification down to the ng/g level can be performed more reliably: background interferences largely disappear. Next to the peak table generated from the GC-TOF-MS software after data processing, the additional use of well-ordered patterns in the 2D-plane and information from second-dimension retention times can substantially help the identification of unknowns. The technique was successfully used for an evaluation of extraction techniques and the characterisation of different types of samples.

Comprehensive two-dimensional gas chromatography with atomic emission detection and correlation with mass spectrometric detection: principles and application in petrochemical analysis

Comprehensive gas chromatography (GC x GC) has been combined with atomic emission detection (AED) to enable element-selective detection. Under optimised experimental conditions, the requirement of minimum five data points across a peak can be obtained even for analytes eluting early from the second-dimension column. Simple manipulation of the results allows the combined presentation of up to four sets of elemental data in one two-dimensional plot. GC x GC with AED and mass spectrometric (MS) detection in petrochemical analysis for fingerprinting as well as the identification of N- and S-containing unknowns is presented as an application.

The role of gas chromatography in compositional analyses in the petroleum industry

Because of the complex character of petroleum fractions and products, gas chromatography has played an important role as an analytical technique in this area since its introduction. For the majority of oil fractions classifying or group-type analyses are performed rather than determinations of all the individual constituents. The general composition of petroleum is discussed and also the relation between composition, product properties and processability. Compositional analyses for petroleum products are reviewed, especially in terms of multi-dimensional gas chromatography. The important role that comprehensive two-dimensional gas chromatography is expected to play in the near future in unraveling the composition of oil fractions is also discussed.