Jan Dellith

High-pressure synthesis of MgB2 with addition of Ti

Abstract Magnesium diboride-based material high-pressure synthesized at 2 GPa and 800 °C for 1 h from Mg and B (taken in the stoichiometry ratio of MgB 2 ) with addition of 2–10 wt.% of Ti demonstrated the critical current density ( j c ) higher than 100 kA/cm 2 at 20 K up to 3 T and at 33 K in 0 T field. At 20 K the critical current density higher than 10 kA/cm 2 was observed up to 5 T field. In the magnetic fields up to 2 T high-pressure synthesized MgB 2 (with 10% of Ti) at 20 K has a critical current density comparable to that of Nb 3 Sn at 4.2 K. XRD patterns of magnesium diboride with Ti addition exhibited no evidence of unreacted titanium and only one compound with titanium was identified, namely, titanium dihydride TiH 2 (or more strictly TiH 1.924 ). The sample with the highest critical current density and the irreversibility field in the temperature range of 25–10 K contained some amount of rather homogeneously dispersed pure Mg and high amount of Mg–B inclusions.

Faraday rotation and photoluminescence in heavily Tb3+-doped GeO2-B2O3-Al2O3-Ga2O3 glasses for fiber-integrated magneto-optics

We report on the magneto-optical (MO) properties of heavily Tb3+-doped GeO2-B2O3-Al2O3-Ga2O3 glasses towards fiber-integrated paramagnetic MO devices. For a Tb3+ ion concentration of up to 9.7 × 1021 cm−3, the reported glass exhibits an absolute negative Faraday rotation of ~120 rad/T/m at 632.8 nm. The optimum spectral ratio between Verdet constant and light transmittance over the spectral window of 400–1500 nm is found for a Tb3+ concentration of ~6.5 × 1021 cm−3. For this glass, the crystallization stability, expressed as the difference between glass transition temperature and onset temperature of melt crystallization exceeds 100 K, which is a prerequisite for fiber drawing. In addition, a high activation energy of crystallization is achieved at this composition. Optical absorption occurs in the NUV and blue spectral region, accompanied by Tb3+ photoluminescence. In the heavily doped materials, a UV/blue-to-green photo-conversion gain of ~43% is achieved. The lifetime of photoluminescence is ~2.2 ms at a stimulated emission cross-section σem of ~1.1 × 10−21 cm2 for ~ 5.0 × 1021 cm−3 Tb3+. This results in an optical gain parameter σem*τ of ~2.5 × 10−24 cm2s, what could be of interest for implementation of a Tb3+ fiber laser.

Reflectivity enhanced refractive index sensor based on a fiber-integrated Fabry-Perot microresonator.

We discuss a fiber-integrated refractive index sensor with strongly improved detection performance. The resonator has been implemented by means of focused-ion beam milling of a step index fiber and shows a sensitivity of about 1.15µm/RIU. Coating the resonator walls led to a strongly improved mirror reflectivity by a factor of about 26. Design rules for device optimization and a detailed mathematical analysis are discussed, revealing that the sensor operates as an optimized Fabry-Perot resonator. We also show that the performance of such kind of Fabry-Perot sensors is, in general, limited by the detection limit function - a quantity depending on the cavitiys finesse and on the measurement capabilities used.

A highly efficient Yb-doped silica laser fiber prepared by gas phase doping technology

In this paper we report on an alternative technique for the preparation of ytterbium (Yb)-doped silica fibers and their characteristics compared to the conventional modified chemical vapor deposition (MCVD) process in combination with solution doping and powder sinter technology (REPUSIL). In the case of the technique applied here, the active core diameter in the preform can be significantly increased via the deposition of Yb and the most important codopant, aluminum (Al), in the gas phase through the high-temperature evaporation of the Yb chelate compound and Al chloride in the MCVD process. The prepared preform shows a homogenous distribution of the refractive index and dopant concentration. The background loss of the drawn fiber was measured to be 25 dB km−1 at 1200 nm. Efficient lasing up to 200 W, showing a slope efficiency of about 80%, was demonstrated, which is comparable to fibers made via MCVD/solution doping and the REPUSIL technique.

Focused ion beam post-processing of optical fiber Fabry-Perot cavities for sensing applications.

Focused ion beam technology is combined with chemical etching of specifically designed fibers to create Fabry-Perot interferometers. Hydrofluoric acid is used to etch special fibers and create microwires with diameters of 15 μm. These microwires are then milled with a focused ion beam to create two different structures: an indented Fabry-Perot structure and a cantilever Fabry-Perot structure that are characterized in terms of temperature. The cantilever structure is also sensitive to vibrations and is capable of measuring frequencies in the range 1 Hz - 40 kHz.

The inclusions of Mg?B (MgB12?) as potential pinning centres in high-pressure?high-temperature-synthesized or sintered magnesium diboride

A systematic study of the structure and superconductive characteristics of high-pressure?high-temperature (2?GPa, 700?1000??C)-synthesized and sintered MgB2 without additions from different initial powders was performed. Among various secondary phases Mg?B inclusions with a stoichiometry close to MgB12 were identified. With an increasing amount of these inclusions the critical current density increased. So these inclusions can be feasible pinning centres in MgB2. The highest jc values in zero field were 1300?kA?cm?2 at 10?K, 780?kA?cm?2 at 20?K and 62?kA?cm?2 at 35?K and in 1?T field were 1200?kA?cm?2 at 10?K, 515?kA?cm?2 at 20?K and 0.1?kA?cm?2 at 35?K for high-pressure-synthesized magnesium diboride and the field of irreversibility at 20?K reached 8?T. The average grain sizes calculated from x-ray examinations in materials having high jc were 15?37?nm.

Ultrathin niobium nanofilms on fiber optical tapers--a new route towards low-loss hybrid plasmonic modes.

Due to the ongoing improvement in nanostructuring technology, ultrathin metallic nanofilms have recently gained substantial attention in plasmonics, e.g. as building blocks of metasurfaces. Typically, noble metals such as silver or gold are the materials of choice, due to their excellent optical properties, however they also possess some intrinsic disadvantages. Here, we introduce niobium nanofilms (~10 nm thickness) as an alternate plasmonic platform. We demonstrate functionality by depositing a niobium nanofilm on a plasmonic fiber taper, and observe a dielectric-loaded niobium surface-plasmon excitation for the first time, with a modal attenuation of only 3–4 dB/mm in aqueous environment and a refractive index sensitivity up to 15 μm/RIU if the analyte index exceeds 1.42. We show that the niobium nanofilm possesses bulk optical properties, is continuous, homogenous, and inert against any environmental influence, thus possessing several superior properties compared to noble metal nanofilms. These results demonstrate that ultrathin niobium nanofilms can serve as a new platform for biomedical diagnostics, superconducting photonics, ultrathin metasurfaces or new types of optoelectronic devices.

Simultaneous measurement of temperature and refractive index using focused ion beam milled Fabry-Perot cavities in optical fiber micro-tips

Optical fiber micro-tips are promising devices for sensing applications in small volume and difficult to access locations, such as biological and biomedical settings. The tapered fiber tips are prepared by dynamic chemical etching, reducing the size from 125 μm to just a few μm. Focused ion beam milling is then used to create cavity structures on the tapered fiber tips. Two different Fabry-Perot micro-cavities have been prepared and characterized: a solid silica cavity created by milling two thin slots and a gap cavity. A third multi-cavity structure is fabricated by combining the concepts of solid silica cavity and gap cavity. This micro-tip structure is analyzed using a fast Fourier transform method to demultiplex the signals of each cavity. Simultaneous measurement of temperature and external refractive index is then demonstrated, presenting sensitivities of - 15.8 pm/K and -1316 nm/RIU, respectively.

Codoped materials for high power fiber lasers - diffusion behaviour and optical properties

Optical fibers for high power lasers and amplifiers are fabricated on the basis of quartz glass which has outstanding properties concerning high fiber strength, high power hardness and low optical losses compared with other glasses such as heavy metal fluoride or oxide glasses. It is well known, however, that the host properties of pure silica regarding the active rare earth ions are insufficient and the laser medium has to be improved by the incorporation of codopants. Here we present new investigations of material and fiber properties for phosphorus/aluminium codoping, with regard to the realization of efficient rare earth doped cw and pulsed high power fiber devices. The diffusion behaviour in the complex systems shows characteristic interaction effects, which influence the dopant concentration and their spatial distribution. The refractive index in the codoped systems and the basic attenuation deviate remarkably from additivity relations. The absorption spectrum in the VIS/NIR region depends on codopant concentration and on preparation conditions, with influence on the fluorescence properties of the rare earths and the laser efficiency.

Label-free imaging and spectroscopic analysis of intracellular bacterial infections.

Staphylococcus aureus is one of the most frequent human pathogens that can also act as a facultative intracellular pathogen causing infections that are extremely difficult to treat. Only little is known about the pathogens intracellular adaptation strategies to escape the hosts response. Here, we present an advanced Raman-based imaging approach providing high quality false-color images to specifically identify intracellular S. aureus and to localize them exactly in three dimensions within endothelial cells. At the same time unprecedented insights into the metabolic characteristics of the pathogen are provided in a label-free and nondestructive manner. The spectral information reveals that the intracellular bacteria are in the exponential growth phase with a reduced replication rate and biochemically different from extracellular bacteria proving their adaptation to the hosts conditions. This powerful biophotonic analysis tool paves the way for further mechanistic studies of difficult-to-investigate infection processes.