Jan Muntel

Efficient, global-scale quantification of absolute protein amounts by integration of targeted mass spectrometry and two-dimensional gel-based proteomics.

Knowledge on absolute protein concentrations is mandatory for the simulation of biological processes in the context of systems biology. A novel approach for the absolute quantification of proteins at a global scale has been developed and its applicability demonstrated using glucose starvation of the Gram-positive model bacterium Bacillus subtilis and the pathogen Staphylococcus aureus as proof-of-principle examples. Absolute intracellular protein concentrations were initially determined for a preselected set of anchor proteins by employing a targeted mass spectrometric method and isotopically labeled internal standard peptides. Known concentrations of these anchor proteins were then used to calibrate two-dimensional (2-D) gels allowing the calculation of absolute abundance of all detectable proteins on the 2-D gels. Using this approach, concentrations of the majority of metabolic enzymes were determined, and thus a quantification of the players of metabolism was achieved. This new strategy is fast, cost-effective, applicable to any cell type, and thus of value for a broad community of laboratories with experience in 2-D gel-based proteomics and interest in quantitative approaches. Particularly, this approach could also be utilized to quantify existing data sets with the aid of a few standard anchor proteins.

Comprehensive Absolute Quantification of the Cytosolic Proteome of Bacillus subtilis by Data Independent, Parallel Fragmentation in Liquid Chromatography/Mass Spectrometry (LC/MSE)

In the growing field of systems biology, the knowledge of protein concentrations is highly required to truly understand metabolic and adaptational networks within the cells. Therefore we established a workflow relying on long chromatographic separation and mass spectrometric analysis by data independent, parallel fragmentation of all precursor ions at the same time (LC/MSE). By prevention of discrimination of co-eluting low and high abundant peptides a high average sequence coverage of 40% could be achieved, resulting in identification of almost half of the predicted cytosolic proteome of the Gram-positive model organism Bacillus subtilis (>1,050 proteins). Absolute quantification was achieved by correlation of average MS signal intensities of the three most intense peptides of a protein to the signal intensity of a spiked standard protein digest. Comparative analysis with heavily labeled peptides (AQUA approach) showed the use of only one standard digest is sufficient for global quantification. The quantification results covered almost four orders of magnitude, ranging roughly from 10 to 150,000 copies per cell. To prove this method for its biological relevance selected physiological aspects of B. subtilis cells grown under conditions requiring either amino acid synthesis or alternatively amino acid degradation were analyzed. This allowed both in particular the validation of the adjustment of protein levels by known regulatory events and in general a perspective of new insights into bacterial physiology. Within new findings the analysis of “protein costs” of cellular processes is extremely important. Such a comprehensive and detailed characterization of cellular protein concentrations based on data independent, parallel fragmentation in liquid chromatography/mass spectrometry (LC/MSE) data has been performed for the first time and should pave the way for future comprehensive quantitative characterization of microorganisms as physiological entities.

The dynamic protein partnership of RNA polymerase inBacillus subtilis

In prokaryotes, transcription results from the activity of a 400 kDa RNA polymerase (RNAP) protein complex composed of at least five subunits (2α, β, β′, ω). To ensure adequate responses to changing environmental cues, RNAP activity is tightly controlled by means of interacting regulatory proteins. Here, we report the affinity‐purification of the Bacillus subtilis RNAP complexes from cells in different growth states and stress conditions, and the quantitative assessment by mass spectrometry of the dynamic changes in the composition of the RNAP complex. The stoichiometry of RNA polymerase was determined by a comparison of two mass spectrometry‐based quantification methods: a label‐based and a label‐free method. The validated label‐free method was then used to quantify the proteins associated with RNAP. The levels of sigma factors bound to RNAP varied during growth and exposure to stress. Elongation factors, helicases such as HelD and PcrA, and novel unknown proteins were also associated with RNAP complexes. The content in 6S RNAs of purified RNAP complexes increased at the onset of the stationary phase. These quantitative variations in the protein and RNA composition of the RNAP complexes well correlate with the known physiology of B. subtilis cells under different conditions.

Advancing Urinary Protein Biomarker Discovery by Data-Independent Acquisition on a Quadrupole-Orbitrap Mass Spectrometer

The promises of data-independent acquisition (DIA) strategies are a comprehensive and reproducible digital qualitative and quantitative record of the proteins present in a sample. We developed a fast and robust DIA method for comprehensive mapping of the urinary proteome that enables large scale urine proteomics studies. Compared to a data-dependent acquisition (DDA) experiments, our DIA assay doubled the number of identified peptides and proteins per sample at half the coefficients of variation observed for DDA data (DIA = ∼8%; DDA = ∼16%). We also tested different spectral libraries and their effects on overall protein and peptide identifications and their reproducibilities, which provided clear evidence that sample type-specific spectral libraries are preferred for reliable data analysis. To show applicability for biomarker discovery experiments, we analyzed a sample set of 87 urine samples from children seen in the emergency department with abdominal pain. The whole set was analyzed with high proteome coverage (∼1300 proteins/sample) in less than 4 days. The data set revealed excellent biomarker candidates for ovarian cyst and urinary tract infection. The improved throughput and quantitative performance of our optimized DIA workflow allow for the efficient simultaneous discovery and verification of biomarker candidates without the requirement for an early bias toward selected proteins.

Quantitative prediction of genome-wide resource allocation in bacteria.

Predicting resource allocation between cell processes is the primary step towards decoding the evolutionary constraints governing bacterial growth under various conditions. Quantitative prediction at genome-scale remains a computational challenge as current methods are limited by the tractability of the problem or by simplifying hypotheses. Here, we show that the constraint-based modeling method Resource Balance Analysis (RBA), calibrated using genome-wide absolute protein quantification data, accurately predicts resource allocation in the model bacterium Bacillus subtilis for a wide range of growth conditions. The regulation of most cellular processes is consistent with the objective of growth rate maximization except for a few suboptimal processes which likely integrate more complex objectives such as coping with stressful conditions and survival. As a proof of principle by using simulations, we illustrated how calibrated RBA could aid rational design of strains for maximizing protein production, offering new opportunities to investigate design principles in prokaryotes and to exploit them for biotechnological applications.

An exclusion list based label-free proteome quantification approach using an LTQ Orbitrap

RATIONALE Label-based mass spectrometry is a powerful tool for large-scale protein identification and quantification. However, it requires the chemical or metabolic incorporation of the labeled compound(s) which can be difficult to attain, e.g. for non-cultivable organisms or scarce sample, such as biopsies. Therefore, we set out to develop and validate an efficient label-free liquid chromatography/tandem mass spectrometry (LC/MS/MS) workflow based on optimized instrument settings and incremental exclusion lists. METHODS To increase the number of quantified peptides an incremental exclusion list was incorporated along with optimized instrument settings for the used LTQ Orbitrap. As a proof of concept, label-free quantification data from this optimized approach were compared to the results of control measurements without exclusion lists and of an in vivo metabolic labeling GeLC/MS/MS experiment. The data were drawn from Staphylococcus aureus whole cell lysates of non-stressed and nitric oxide (NO)-stressed cells. RESULTS Compared to MS analysis without exclusion lists the new approach resulted in an increased number of identified peptides, enabling label-free quantification of more than 990 S. aureus proteins. With respect to the number of quantified proteins and differences in protein levels between the control and NO-treated samples the results of the new method were consistent with those of the GeLC/MS/MS experiment. CONCLUSIONS The application of exclusion lists and optimized instrument settings in LC/MS/MS analysis significantly enhances the sensitivity and resolution of label-free protein identification and quantification. Therefore, the new workflow is a powerful alternative to label-based quantification methods.

Stress responses of the industrial workhorse Bacillus licheniformis to osmotic challenges.

The Gram-positive endospore-forming bacterium Bacillus licheniformis can be found widely in nature and it is exploited in industrial processes for the manufacturing of antibiotics, specialty chemicals, and enzymes. Both in its varied natural habitats and in industrial settings, B. licheniformis cells will be exposed to increases in the external osmolarity, conditions that trigger water efflux, impair turgor, cause the cessation of growth, and negatively affect the productivity of cell factories in biotechnological processes. We have taken here both systems-wide and targeted physiological approaches to unravel the core of the osmostress responses of B. licheniformis. Cells were suddenly subjected to an osmotic upshift of considerable magnitude (with 1 M NaCl), and their transcriptional profile was then recorded in a time-resolved fashion on a genome-wide scale. A bioinformatics cluster analysis was used to group the osmotically up-regulated genes into categories that are functionally associated with the synthesis and import of osmostress-relieving compounds (compatible solutes), the SigB-controlled general stress response, and genes whose functional annotation suggests that salt stress triggers secondary oxidative stress responses in B. licheniformis. The data set focusing on the transcriptional profile of B. licheniformis was enriched by proteomics aimed at identifying those proteins that were accumulated by the cells through increased biosynthesis in response to osmotic stress. Furthermore, these global approaches were augmented by a set of experiments that addressed the synthesis of the compatible solutes proline and glycine betaine and assessed the growth-enhancing effects of various osmoprotectants. Combined, our data provide a blueprint of the cellular adjustment processes of B. licheniformis to both sudden and sustained osmotic stress.

SweetSEQer: simple de novo filtering and annotation of glycoconjugate mass spectra

The past 15 years have seen significant progress in LC-MS/MS peptide sequencing, including the advent of successful de novo and database search methods; however, analysis of glycopeptide and, more generally, glycoconjugate spectra remains a much more open problem, and much annotation is still performed manually. This is partly because glycans, unlike peptides, need not be linear chains and are instead described by trees. In this study, we introduce SweetSEQer, an extremely simple open source tool for identifying potential glycopeptide MS/MS spectra. We evaluate SweetSEQer on manually curated glycoconjugate spectra and on negative controls, and we demonstrate high quality filtering that can be easily improved for specific applications. We also demonstrate a high overlap between peaks annotated by experts and peaks annotated by SweetSEQer, as well as demonstrate inferred glycan graphs consistent with canonical glycan tree motifs. This study presents a novel tool for annotating spectra and producing glycan graphs from LC-MS/MS spectra. The tool is evaluated and shown to perform similarly to an expert on manually curated data.

Abundance-based Classifier for the Prediction of Mass Spectrometric Peptide Detectability Upon Enrichment (PPA)

The function of a large percentage of proteins is modulated by post-translational modifications (PTMs). Currently, mass spectrometry (MS) is the only proteome-wide technology that can identify PTMs. Unfortunately, the inability to detect a PTM by MS is not proof that the modification is not present. The detectability of peptides varies significantly making MS potentially blind to a large fraction of peptides. Learning from published algorithms that generally focus on predicting the most detectable peptides we developed a tool that incorporates protein abundance into the peptide prediction algorithm with the aim to determine the detectability of every peptide within a protein. We tested our tool, “Peptide Prediction with Abundance” (PPA), on in-house acquired as well as published data sets from other groups acquired on different instrument platforms. Incorporation of protein abundance into the prediction allows us to assess not only the detectability of all peptides but also whether a peptide of interest is likely to become detectable upon enrichment. We validated the ability of our tool to predict changes in protein detectability with a dilution series of 31 purified proteins at several different concentrations. PPA predicted the concentration dependent peptide detectability in 78% of the cases correctly, demonstrating its utility for predicting the protein enrichment needed to observe a peptide of interest in targeted experiments. This is especially important in the analysis of PTMs. PPA is available as a web-based or executable package that can work with generally applicable defaults or retrained from a pilot MS data set.

MStern Blotting–High Throughput Polyvinylidene Fluoride (PVDF) Membrane-Based Proteomic Sample Preparation for 96-Well Plates

We describe a 96-well plate compatible membrane-based proteomic sample processing method, which enables the complete processing of 96 samples (or multiples thereof) within a single workday. This method uses a large-pore hydrophobic PVDF membrane that efficiently adsorbs proteins, resulting in fast liquid transfer through the membrane and significantly reduced sample processing times. Low liquid transfer speeds have prevented the useful 96-well plate implementation of FASP as a widely used membrane-based proteomic sample processing method. We validated our approach on whole-cell lysate and urine and cerebrospinal fluid as clinically relevant body fluids. Without compromising peptide and protein identification, our method uses a vacuum manifold and circumvents the need for digest desalting, making our processing method compatible with standard liquid handling robots. In summary, our new method maintains the strengths of FASP and simultaneously overcomes one of the major limitations of FASP without compromising protein identification and quantification.