Jana Lokajová

Impact of Amphiphilic Biomass-Dissolving Ionic Liquids on Biological Cells and Liposomes

The toxicity of some promising biomass-dissolving amidinium-, imidazolium-, and phosphonium-based ionic liquids (ILs), toward two different cell lines, human corneal epithelial cells and Escherichia coli bacterial cells, was investigated. In addition, dynamic light scattering (DLS) and ζ potential measurements were used to study the effect of the ILs on the size and surface charge of some model liposomes. Capillary electrophoresis (CE) was used for determination of the electrophoretic mobilities of the liposomes and for determination of the critical micelle concentration (cmc) of the ILs. The toxicity of the phosphonium ILs was highly dependent on the longest linear chain of the IL, due to increasing hydrophobicity, with the long-chain phosphonium ILs being toxic while the shorter-chain versions were significantly less toxic or not toxic at all. Amidinium and imidazolium ILs showed no significant effect on the cells, within the concentration range used. Moreover, the more hydrophobic ILs were found to have a major effect on the surface charges and size distributions of the model liposomes, which can lead to disruption of the lipid bilayer. This indicates that the cytotoxicity is at least to some extent dependent on direct interactions between ILs and the biomembrane.

Liposomes for entrapping local anesthetics: A liposome electrokinetic chromatographic study

Bupivacaine is a lipophilic, long‐acting, amide class local anesthetic commonly used in clinical practice to provide local anesthesia during surgical procedures. Several cases of accidental overdose with cardiac arrest and death have been reported since bupivacaine was introduced to human use. Recent case reports have suggested that Intralipid (Fresenius Kabi) is an effective therapy for cardiac toxicity from high systemic concentrations of, e.g. bupivacaine, even though the mechanism behind the interaction is not fully clear yet. Our long‐term aim is to develop a sensitive, efficient, and non‐harmful lipid‐based formulation to specifically trap harmful substances in vivo. In this study, the in vitro interaction of local anesthetics (bupivacaine, prilocaine, and lidocaine) with Intralipid or lipid vesicles containing phosphatidylglycerol, phosphatidylcholine, cardiolipin, cholesterol, and N‐palmitoyl‐D‐erythro‐sphingosine (ceramide) was determined by liposome electrokinetic chromatography. The interactions were evaluated by calculating the retention factors and distribution constants. Atomic force microscopy measurements were carried out to confirm that the interaction mechanism was solely due to interactions between the analytes and the moving pseudostationary phase and not by interactions with a stationary lipid phase adsorbed to the fused‐silica wall. The heterogeneity of the liposomes was also studied by atomic force microscopy. The liposome electrokinetic chromatography results demonstrate that there is higher interaction between the drugs and negatively charged liposome dispersion than with the commercial Intralipid dispersion.

Marker compounds for the determination of retention factors in EKC

EKC and its sub-techniques, such as MEKC and microemulsion EKC, have attracted wide interest in recent years. Investigations on this topic have covered several analytical applications, but attention has also been paid more and more to basic studies. This review provides an overview of the different approaches to calculating retention factors, which express the ratio of the amount of sample component in the pseudostationary and mobile phases. Special attention is given to the selection of markers for the determination of the electrophoretic mobility or migration time of a marker describing the behavior of the pseudostationary phase in EKC. Introduction of a hydrophobic marker is by far the most common approach, but the use of a homologous series of compounds is also quite popular. In addition, other possible approaches found in the literature will be described.

System peaks in micellar electrophoresis: I. Utilization of system peaks for determination of critical micelle concentration.

A new way to determine the critical micelle concentration (CMC) based on the mobilities of system peaks is presented. A general approach for the CMC determination is based on the change of the slope or on finding the inflection point in the plot of a physical property of solution as a function of surfactant concentration. The determination of CMC by system peaks in CE utilizes a “jump” instead of a continuous change in the measured quantity. This phenomenon was predicted by the program PeakMaster, which was modified for simulation of micellar systems. The simulation of the steep change in mobilities of the anionic system peaks showing the CMC value was verified experimentally in a set of measurements, where the concentration of the surfactant was varied while the ionic strength was kept constant. The experimental work fully proved our model. A comparative electric current measurement was carried out. The proposed method seems to offer easier CMC determination as compared to the standard methods.

Multilayer Polymeric Nanoparticles Based on Specific Interactions in Solution: Polystyrene-block-poly(methacrylic acid) Micelles with Linear Poly(2-vinylpyridine) in Aqueous Buffers

Polymeric micelles of polystyrene-block-poly(methacrylic acid) with the shell containing various amounts of poly(2-vinylpyridine) chains were prepared by dialysis from 1,4-dioxane-rich mixtures into alkaline aqueous solutions. The structure of the polymeric nanoparticles was studied by light scattering, atomic force microscopy, fluorometry, and capillary zone electrophoresis. The presence of both weak polyacid and weak polybase in the corona allows the micelles to form fairly stable solutions in a broad pH range. Poly(methacrylic acid) blocks are dissociated in basic buffers, while poly(2-vinylpyridine) chains stabilize the micelles in acidic solutions. Besides the water-swollen shell, the inner parts of the micelles consist of the kinetically frozen polystyrene core and relatively rigid layer of poly(methacrylic acid) and poly(2-vinylpyridine) segments. An insufficient number of stabilizing polymer chain segments results in the aggregation of the micelles into clusters.

Determination of N-methyl-2-pyrrolidone and its metabolites in urine by micellar electrokinetic chromatography

AbstractA fast and accurate micellar electrokinetic capillary chromatography (MEKC) method was developed for monitoring N-methyl-2-pyrrolidone (NMP) exposure. Baseline separation of NMP and its main metabolites: 5-hydroxy-N-methyl-2-pyrrolidone (5HNMP), N-methylsuccinimide (MSI), 2-hydroxy-N-methylsuccinimide (2HMSI), and 2-pyrrolidone (2P) was obtained within 6 min in an uncoated fused silica capillary using 5 mM phosphate buffer and 140 mM sodium dodecyl sulfate (pH 7.1) as background electrolyte (BGE). On-line UV-detection was performed at 200 nm and the applied electric field was 400 V cm−1. Possible interference of BGE-induced system peaks on separation was investigated by computer simulation and no such interference was observed. The developed MEKC method combined with solid phase extraction for sample preparation was successfully applied to the analysis of urine of rats exposed to NMP. The urinary excretion was determined in 0–6 h and 6–24 h specimens collected after an intragastic administration of 308 mg NMP / kg rat body weight. The results of NMP disposition kinetics in rat urine are reported for NMP and metabolites.

Use of Capillary Zone Electrophoresis and Micellar Electrokinetic Chromatography for Separations of Anthraquinone Derivatives

The behavior of seven hydroxy anthraquinone derivatives was studied by capillary zone electrophoresis and micellar electrokinetic chromatography. The effects of buffer pH (6.5–10.8) and sodium dodecyl sulfate concentration (10–20 mmol L−1) on the effective mobilities of the analytes and their separation were tested. A comparison of the two optimized separation systems showed that micellar electrokinetic chromatography was superior as it permits separation of all the seven analytes within 15 min, using 15 mmol L−1 sodium dodecyl sulfate in 10 mmol L−1 tetraborate buffer, pH 8.5, at a voltage of 20 kV. The calibration curves were linear in the concentration range from 5.0 · 10−7 to 5.0 · 10−4 mol L−1 for most of the analytes, at a detection wavelength of 254 nm. LOD and LOQ values of the analytes were in the ranges of 2.10 · 10−7–1.28 · 10−6 mol L−1and 6.99 · 10−7–4.25 · 10−6 mol L−1, respectively. The proposed separation conditions were applied to determination of 1,2-dihydroxy anthraquinone (alizarin) and 1,2,4-trihydroxy anthraquinone (purpurin) in Rubia tinctorum aglycone and of the recently described 1-acetyl-2,4,5,7-tetrahydroxy-9,10-anthraquinone and 1-acetyl-2,4,5,7,8-pentahydroxy-9,10-anthraquinone in the mycelium of fungi Geosmithia lavendula.