Jana Suchánková

Methacrylate monolithic columns of 320 μm I.D. for capillary liquid chromatography

Monolithic capillary columns (320 microm I.D.) were prepared for capillary liquid chromatography (CLC) by radical polymerization of butylmethacrylate (BMA) and ethylenedimethacrylate (EDMA) in the presence of a porogen solvent containing propan-1-ol, butane-1,4-diol and water. The influence of the contents of the porogen solvent and EDMA in the polymerization mixture on the monolith porosity and column efficiency was investigated. The composition of the polymerization mixture was optimized to attain a minimum HETP of the order of tens of microm for test compounds with various polarities. The separation performance and selectivity of the most efficient monolithic column prepared was characterized by van Deemter curves, peak asymmetry factors and Walters hydrophobicity and silanol indices. It was demonstrated that the 320-microm I.D. monolithic column exhibited CLC separation performance similar to that observed for 100- and 150-microm I.D. monolithic columns reported in the literature; moreover, the 320-microm I.D. column was easier to operate in CLC and exhibited a higher sample loadability.

Stationary phases for peptide analysis by high performance liquid chromatography: a review

Abstract A survey is given of modern stationary phases employed in high performance liquid chromatography (HPLC) analysis of peptides. The physico-chemical properties of peptides and their consequences for the selection and optimization of the separation system are briefly discussed, followed by a summary of the approaches to the selection and characterization of stationary phases. The properties and applicability of various stationary phases are then critically reviewed, including aspects such as size-exclusion, ion-exchange, reversed-phase, hydrophobic-interaction, affinity and chiral systems, as well as some specialized separation techniques. Emphasis is placed on the most recent literature.

Separation of biologically active peptides by capillary electrophoresis and high-performance liquid chromatography

HPLC and CE have been applied to the separation of some newly synthesized substances, including nonapeptides from the intrachinary region of insulin, insulin-like growth factors I and II (IGF I and II) and some penta- and hexapeptides. All the peptides are satisfactorily separated using a reversed-phase HPLC system with a C18 stationary phase and mobile phases of 20-40% acetonitrile (v/v) and 0.2% trifluoroacetic acid in water (v/v). The best CE separation of IGF I and II has been achieved in a 30 mM phosphate buffer (pH 4-5), whereas 150 mM phosphoric acid (pH 1.8) is optimal for the insulin nonapeptides. The latter electrolyte is also suitable for the CE separation of the hexapeptides, as is a micellar system containing 20 mM borate-50 mM sodium dodecyl sulfate (pH 9.0). Complete CE resolution of the D- and L-forms is possible in a 50 mM phosphate buffer (pH 2.5) containing 10 mM beta-cyclodextrin. UV spectrophotometric detection was used throughout, at wavelengths from 190 to 215 nm. The CE procedures are, in general, preferable to HPLC separations, as they exhibit better separation efficiencies, are faster and consume smaller amounts of analytes and reagents.

Quantification and purity determination of newly synthesized thioacridines by capillary liquid chromatography

Capillary liquid chromatography (CLC) was applied for quantification and impurity profile determination of ten newly synthesized acridine thioderivatives. A reversed-phase CLC system employing two different stationary phases, Nucleosil C18 and LiChrosorb RP-select B, was used. The mobile phase composition was optimized to get a satisfactory separation of impurities from the main acridine component in a reasonable analysis time. Significant differences in the chromatographic behavior between acridine derivatives containing and lacking amino groups were observed. Optimized separation conditions were used in CLC to measure the calibration curves of the acridine derivatives in a concentration range from 1.0 x 10(-6) to 1.0 x 10(-3) M at two different detector wavelengths (214 and 230 nm). Limits of detection and quantification of all the substances were determined. The detection limits went down to units of microM for most of the derivatives. CLC was also demonstrated to be a suitable method for the purity determination of test batches of the acridine thioderivatives.

System peaks observed in capillary liquid chromatography with eluents containing triethylamine

SummaryTriethylamine is often added to mobile phases in reversed-phase liquid chromatography for dynamic deactivation of free silanol groups of the stationary phase. It has been observed that eluents composed of methanol and triethylamine generate two system peaks in chromatograms obtained with LiChrosorb RP-select B stationary phase, whose retention times correspond to the dead time and to the retention time of triethylamine. It has been demonstrated that the system peaks can be positive or negative depending on the experimental conditions and may be incorrectly interpreted as peaks corresponding to sample components. An approach is outlined to unambiguous identify these system peaks in chromatograms of practical samples.