Janez Kos

The GALAH survey: Scientific motivation

The Galactic Archaeology with HERMES (GALAH) survey is a large high-resolution spectroscopic survey using the newly commissioned High Efficiency and Resolution Multi-Element Spectrograph (HERMES) on the Anglo-Australian Telescope. The HERMES spectrograph provides high-resolution (R ~ 28 000) spectra in four passbands for 392 stars simultaneously over a 2 deg field of view. The goal of the survey is to unravel the formation and evolutionary history of the Milky Way, using fossil remnants of ancient star formation events which have been disrupted and are now dispersed throughout the Galaxy. Chemical tagging seeks to identify such dispersed remnants solely from their common and unique chemical signatures; these groups are unidentifiable from their spatial, photometric or kinematic properties. To carry out chemical tagging, the GALAH survey will acquire spectra for a million stars down to V ~ 14. The HERMES spectra of FGK stars contain absorption lines from 29 elements including light proton-capture elements, α-elements, odd-Z elements, iron-peak elements and n-capture elements from the light and heavy s-process and the r-process. This paper describes the motivation and planned execution of the GALAH survey, and presents some results on the first-light performance of HERMES.

The GALAH survey: observational overview and Gaia DR1 companion

The Galactic Archaeology with HERMES (GALAH) Survey is a massive observational project to trace the Milky Ways history of star formation, chemical enrichment, stellar migration and minor mergers. Using high-resolution (R

Pseudo–three-dimensional maps of the diffuse interstellar band at 862 nm

\simeq

First light results from the High Efficiency and Resolution Multi-Element Spectrograph at the Anglo-Australian Telescope

28,000) spectra taken with the High Efficiency and Resolution Multi-Element Spectrograph (HERMES) instrument at the Anglo-Australian Telescope (AAT), GALAH will determine stellar parameters and abundances of up to 29 elements for up to one million stars. Selecting targets from a colour-unbiased catalogue built from 2MASS, APASS and UCAC4 data, we expect to observe dwarfs at 0.3 to 3 kpc and giants at 1 to 10 kpc. This enables a thorough local chemical inventory of the Galactic thin and thick disks, and also captures smaller samples of the bulge and halo. In this paper we present the plan, process and progress as of early 2016 for GALAH survey observations. In our first two years of survey observing we have accumulated the largest high-quality spectroscopic data set at this resolution, over 200,000 stars. We also present the first public GALAH data catalogue: stellar parameters (Teff, log(g), [Fe/H], [alpha/Fe]), radial velocity, distance modulus and reddening for 10680 observations of 9860 Tycho-2 stars that may be included in the first Gaia data release.

Diffuse interstellar band at 8620 å in rave: A new method for detecting the diffuse interstellar band in spectra of cool stars

Clues to a mystery with RAVE results An unknown interloper systematically picks off light from galactic sources, snatching at specific wavelengths ranging from the ultraviolet to the infrared. The cause of what astronomers term diffuse interstellar bands (DIBs) still evades identification. Kos et al. combined nearly 500,000 stellar spectra from the RAVE survey to make a telling map that may clue us in further. This pseudo–three-dimensional map shows the distribution of the carrier that absorbs light at 862 nm, and it closely follows a separate map of interstellar dust, but with a significantly larger scale height in the Galactic plane. Though this is only one DIB of many, this analysis sets a path for the future study of others. Science, this issue p. 791 The map of an absorption line with unknown origins correlates well with a map of extinction by interstellar dust. The diffuse interstellar bands (DIBs) are absorption lines observed in visual and near-infrared spectra of stars. Understanding their origin in the interstellar medium is one of the oldest problems in astronomical spectroscopy, as DIBs have been known since 1922. In a completely new approach to understanding DIBs, we combined information from nearly 500,000 stellar spectra obtained by the massive spectroscopic survey RAVE (Radial Velocity Experiment) to produce the first pseudo–three-dimensional map of the strength of the DIB at 8620 angstroms covering the nearest 3 kiloparsecs from the Sun, and show that it follows our independently constructed spatial distribution of extinction by interstellar dust along the Galactic plane. Despite having a similar distribution in the Galactic plane, the DIB 8620 carrier has a significantly larger vertical scale height than the dust. Even if one DIB may not represent the general DIB population, our observations outline the future direction of DIB research.

The GALAH survey: the data reduction pipeline

Abstract. The High Efficiency and Resolution Multi Element Spectrograph, HERMES, is a facility-class optical spectrograph for the Anglo-Australian Telescope (AAT). It is designed primarily for Galactic Archaeology, the first major attempt to create a detailed understanding of galaxy formation and evolution by studying the history of our own galaxy, the Milky Way. The goal of the GALAH survey is to reconstruct the mass assembly history of the Milky Way through a detailed chemical abundance study of one million stars. The spectrograph is based at the AAT and is fed by the existing 2dF robotic fiber positioning system. The spectrograph uses volume phase holographic gratings to achieve a spectral resolving power of 28,000 in standard mode and also provides a high-resolution mode ranging between 40,000 and 50,000 using a slit mask. The GALAH survey requires an SNR greater than 100 for a star brightness of V=14 in an exposure time of one hour. The total spectral coverage of the four channels is about 100 nm between 370 and 1000 nm for up to 392 simultaneous targets within the 2-degree field of view. HERMES has been commissioned over three runs, during bright time in October, November, and December 2013, in parallel with the beginning of the GALAH pilot survey, which started in November 2013. We present the first-light results from the commissioning run and the beginning of the GALAH survey, including performance results such as throughput and resolution, as well as instrument reliability.

The GALAH Survey: second data release

Diffuse interstellar bands (DIBs) are usually observed in spectra of hot stars, where interstellar lines are rarely blended with stellar ones. The need for hot stars is a strong limitation in the number of sightlines we can observe and their distribution in the Galaxy, as hot stars are rare and concentrated in the Galactic plane. We are introducing a new method, where interstellar lines can be observed in spectra of cool stars in large spectroscopic surveys. The method is completely automated and does not require prior knowledge of the stellar parameters. The main step is a construction of the stellar spectrum, which is done by finding other observed spectra that lack interstellar features and are otherwise very similar to the spectrum in question. Such spectra are then combined into a single stellar spectrum template, matching the stellar component of the observed spectrum. We demonstrate the performance of this new method on a sample of 482,430 Radial Velocity Experiment survey spectra. However, many spectra have to be combined (48 on average) in order to achieve a signal-to-noise ratio high enough to measure the profile of the DIB at 8620 A, hence limiting the spatial information about the interstellar medium. We compare its equivalent width with extinction maps and with Bayesian reddening, calculated for individual stars, and provide a linear relation between the equivalent width and reddening. Separately from the introduced method, we calculate equivalent widths of the DIB in spectra of hot stars with known extinction and compare all three linear relations.

The TESS-HERMES survey data release 1: high-resolution spectroscopy of the TESS southern continuous viewing zone

We present the data reduction procedures being used by the GALactic Archeology with Hermes (GALAH) survey, carried out with the HERMES fibre-fed, multi-object spectrograph on the 3.9-m Anglo-Australian Telescope. GALAH is a unique survey, targeting 1 million stars brighter than magnitude V = 14 at a resolution of 28 000 with a goal to measure the abundances of 29 elements. Such a large number of high-resolution spectra necessitate the development of a reduction pipeline optimized for speed, accuracy, and consistency.We outline the design and structure of the IRAF-based reduction pipeline that we developed, specifically for GALAH, to produce fully calibrated spectra aimed for subsequent stellar atmospheric parameter estimation. The pipeline takes advantage of existing IRAF routines and other readily available software so as to be simple to maintain, testable, and reliable. A radial velocity and stellar atmospheric parameter estimator code is also presented, which is used for further data analysis and yields a useful verification of the reduction quality. We have used this estimator to quantify the data quality of GALAH for fibre cross-talk level (≲0.5 per cent) and scattered light (~5 counts in a typical 20 min exposure), resolution across the field, sky spectrum properties, wavelength solution reliability (better than 1 kms-1 accuracy), and radial velocity precision. (Less)

The GALAH survey: stellar streams and how stellar velocity distributions vary with Galactic longitude, hemisphere, and metallicity

The Galactic Archaeology with HERMES (GALAH) survey is a large-scale stellar spectroscopic survey of theMilkyWay, designed to deliver complementary chemical information to a large number of stars covered by the Gaia mission. We present the GALAH second public data release (GALAH DR2) containing 342 682 stars. For these stars, the GALAH collaboration provides stellar parameters and abundances for up to 23 elements to the community. Here we present the target selection, observation, data reduction, and detailed explanation of how the spectra were analysed to estimate stellar parameters and element abundances. For the stellar analysis, we have used a multistep approach. We use the physics-driven spectrum synthesis of Spectroscopy Made Easy (SME) to derive stellar labels (T eff , logg, [Fe/H], [X/Fe], v mic , vsin i, AK S ) for a representative training set of stars. This information is then propagated to the whole sample with the data-driven method of The Cannon. Special care has been exercised in the spectral synthesis to only consider spectral lines that have reliable atomic input data and are little affected by blending lines. Departures from local thermodynamic equilibrium (LTE) are considered for several key elements, including Li, O, Na, Mg, Al, Si, and Fe, using 1D MARCS stellar atmosphere models. Validation tests including repeat observations, Gaia benchmark stars, open and globular clusters, and K2 asteroseismic targets lend confidence to our methods and results. Combining the GALAH DR2 catalogue with the kinematic information from Gaia will enable a wide range of Galactic Archaeology studies, with unprecedented detail, dimensionality, and scope.

Mapping the aberrations of a wide-field spectrograph using a photonic comb

The Transiting Exoplanet Survey Satellite (TESS) will provide high-precision time series photometry for millions of stars with at least a half-hour cadence. Of particular interest are the circular ...