Jani Seitsonen

Electrostatic assembly of binary nanoparticle superlattices using protein cages

Binary nanoparticle superlattices are periodic nanostructures with lattice constants much shorter than the wavelength of light and could be used to prepare multifunctional metamaterials. Such superlattices are typically made from synthetic nanoparticles, and although biohybrid structures have been developed, incorporating biological building blocks into binary nanoparticle superlattices remains challenging. Protein-based nanocages provide a complex yet monodisperse and geometrically well-defined hollow cage that can be used to encapsulate different materials. Such protein cages have been used to program the self-assembly of encapsulated materials to form free-standing crystals and superlattices at interfaces or in solution. Here, we show that electrostatically patchy protein cages--cowpea chlorotic mottle virus and ferritin cages--can be used to direct the self-assembly of three-dimensional binary superlattices. The negatively charged cages can encapsulate RNA or superparamagnetic iron oxide nanoparticles, and the superlattices are formed through tunable electrostatic interactions with positively charged gold nanoparticles. Gold nanoparticles and viruses form an AB(8)(fcc) crystal structure that is not isostructural with any known atomic or molecular crystal structure and has previously been observed only with large colloidal polymer particles. Gold nanoparticles and empty or nanoparticle-loaded ferritin cages form an interpenetrating simple cubic AB structure (isostructural with CsCl). We also show that these magnetic assemblies provide contrast enhancement in magnetic resonance imaging.

Modifying Native Nanocellulose Aerogels with Carbon Nanotubes for Mechanoresponsive Conductivity and Pressure Sensing

Mechanically excellent native cellulose nanofibers that are cleaved from plant cell walls have been modified by functionalized few-walled carbon nanotubes for hybrid nanofiber/nanotube aerogels. They show elastic mechanical behavior in combination with reversible electrical response under compression allowing responsive conductivity and pressure sensing. The concept combines wide availability of nanocellulosics and electrical functionality of carbon nanotubes synergistically.

Transition to Reinforced State by Percolating Domains of Intercalated Brush-Modified Cellulose Nanocrystals and Poly(butadiene) in Cross-Linked Composites Based on Thiol–ene Click Chemistry

The classic nanocomposite approach aims at percolation of low fraction of exfoliated individual reinforcing nanoscale elements within a polymeric matrix. By contrast, many of the mechanically excellent biological nanocomposites involve self-assembled and space-filled structures of hard reinforcing and soft toughening domains, with high weight fraction of reinforcements. Here we inspect a new concept toward mimicking such structures by studying whether percolation of intercalated domains consisting of alternating rigid and reinforcing, and soft rubbery domains could allow a transition to a reinforced state. Toward that, we present the functionalization of rigid native cellulose nanocrystals (CNCs) by esterification with a dense hydrocarbon chain brush containing cross-linkable double bonds. Composite films with 0-80 wt % of such modified CNCs (mCNCs) within a poly(butadiene) (PBD) rubber matrix were prepared via cross-linking by UV-light initiated thiol-ene click reaction. Transmission electron microscopy showed structures at two length scales, where the mCNCs and PBD form domains having internal aligned self-assemblies of alternating hard mCNCs and soft PBD with periodicity of ca. 40 nm, and where additional PBD connects such domains. Increasing the weight fraction of mCNCs causes an uncommon abrupt transition from PBD-dominated soft materials to significantly reinforced mCNC-dominated mechanical properties, suggesting that the intercalated self-assembled mCNC/PBD domains percolate in PBD upon passing 30-35 wt % of mCNCs. Maximum stress of 16 MPa at mCNC fraction of 80 wt % was obtained. The mechanical properties of the composites show exceptional insensitivity to air humidity. The shown simple concept of percolative intercalated nanocomposites suggests searching for more general biomimetic compositions involving several deformation mechanisms for improved mechanical properties.

Supracolloidal Multivalent Interactions and Wrapping of Dendronized Glycopolymers on Native Cellulose Nanocrystals

Cellulose nanocrystals (CNCs) are high aspect ratio colloidal rods with nanoscale dimensions, attracting considerable interest recently due to their high mechanical properties, chirality, sustainability, and availability. In order to exploit them for advanced functions in new materials, novel supracolloidal concepts are needed to manipulate their self-assemblies. We report on exploring multivalent interactions to CNC surface and show that dendronized polymers (DenPols) with maltose-based sugar groups on the periphery of lysine dendrons and poly(ethylene-alt-maleimide) polymer backbone interact with CNCs. The interactions can be manipulated by the dendron generation suggesting multivalent interactions. The complexation of the third generation DenPol (G3) with CNCs allows aqueous colloidal stability and shows wrapping around CNCs, as directly visualized by cryo high-resolution transmission electron microscopy and electron tomography. More generally, as the dimensions of G3 are in the colloidal range due to their ~6 nm lateral size and mesoscale length, the concept also suggests supracolloidal multivalent interactions between other colloidal objects mediated by sugar-functionalized dendrons giving rise to novel colloidal level assemblies.

Tuning Self-Assembled Nanostructures Through Enzymatic Degradation of a Peptide Amphiphile

The enzymatic cleavage of a peptide amphiphile (PA) is investigated. The self-assembly of the cleaved products is distinct from that of the PA substrate. The PA C16-KKFFVLK is cleaved by α-chymotrypsin at two sites leading to products C16-KKF with FVLK and C16-KKFF with VLK. The PA C16-KKFFVLK forms nanotubes and helical ribbons at room temperature. Both PAs C16-KKF and C16-KKFF corresponding to cleavage products instead self-assemble into 5–6 nm diameter spherical micelles, while peptides FVLK and VLK do not adopt well-defined aggregate structures. The secondary structures of the PAs and peptides are examined by FTIR and circular dichroism spectroscopy and X-ray diffraction. Only C16-KKFFVLK shows substantial β-sheet secondary structure, consistent with its self-assembly into extended aggregates, based on PA layers containing hydrogen-bonded peptide headgroups. This PA also exhibits a thermoreversible transition to twisted tapes on heating.

Electrostatic Self-Assembly of Soft Matter Nanoparticle Cocrystals with Tunable Lattice Parameters

Atomic crystal structure affects the electromagnetic and thermal properties of common matter. Similarly, the nanoscale structure controls the properties of higher length-scale metamaterials, for example, nanoparticle superlattices and photonic crystals. Electrostatic self-assembly of oppositely charged nanoparticles has recently become a convenient way to produce crystalline nanostructures. However, understanding and controlling the assembly of soft nonmetallic particle crystals with long-range translational order remains a major challenge. Here, we show the electrostatic self-assembly of binary soft particle cocrystals, consisting of apoferritin protein cages and poly(amidoamine) dendrimers (PAMAM), with very large crystal domain sizes. A systematic series of PAMAM dendrimers with generations from two to seven were used to produce the crystals, which showed a dendrimer generation dependency on the crystal structure and lattice constant. The systematic approach presented here offers a transition from trial-and-error experiments to a fundamental understanding and control over the nanostructure. The structure and stability of soft particle cocrystals are of major relevance for applications where a high degree of structural control is required, for example, protein-based mesoporous materials, nanoscale multicompartments, and metamaterials.

Alanine-rich amphiphilic peptide containing the RGD cell adhesion motif: a coating material for human fibroblast attachment and culture

We studied the self-assembly of peptide A6RGD (A: alanine, R: arginine, G: glycine, D: aspartic acid) in water, and the use of A6RGD substrates as coatings to promote the attachment of human cornea stromal fibroblasts (hCSFs). The self-assembled motif of A6RGD was shown to depend on the peptide concentration in water, where both vesicle and fibril formation were observed. Oligomers were detected for 0.7 wt% A6RGD, which evolved into short peptide fibres at 1.0 wt% A6RGD, while a co-existence of vesicles and long peptide fibres was revealed for 2-15 wt% A6RGD. A6RGD vesicle walls were shown to have a multilayer structure built out of highly interdigitated A6 units, while A6RGD fibres were based on β-sheet assemblies. Changes in the self-assembly motif with concentration were reflected in the cell culture assay results. Films dried from 0.1-1.0 wt% A6RGD solutions allowed hCSFs to attach and significantly enhanced cell proliferation relative to the control. In contrast, films dried from 2.5 wt% A6RGD solutions were toxic to hCSFs.

Cilia-mimetic hairy surfaces based on end-immobilized nanocellulose colloidal rods.

We show a simple method toward nanoscale cilia-like structures, i.e., functional hairy surfaces, upon topochemically functionalizing nanorods of cellulose nanocrystals (CNCs) with thiol end groups (CNC-SHs), which leads to their immobilization onto a gold surface from one end, still allowing their orientational mobility. CNCs having a lateral dimension of 3-5 nm and length of 50-500 nm incorporate the native crystalline structure with hydrogen-bonded cellulose chains in the parallel configuration. This facilitates asymmetric, selective chemical modification of the reducing ends through reductive amination. Successful thiol functionalization is demonstrated using cryo transmission electron microscopy based on selective attachment of silver nanoparticles to the CNC-SH ends to form Janus-like colloidal rod-sphere adducts. The extent of thiol modification of CNC-SHs is quantified using X-ray photoelectron spectroscopy. The promoted binding of CNC-SHs on gold surfaces is shown by atomic force microscopy and quartz crystal microbalance, where the high dissipation suggests pronounced orientational mobility due to flexible joints at one rod end onto the surfaces. That the joints are flexible is also shown by the bending and realignment of the CNC-SH rods using a receding triple-phase evaporation front of a drying drop of water. The ability of the hairy surface to size-selectively resist particle binding was also investigated. As the CNCs are piezoelectric and allow magnetic functionalization by nanoparticles, we foresee a general platform for nanosized artificial cilia for fluid manipulation and controlled adsorption/desorption.

Self-assembly of a model amphiphilic oligopeptide incorporating an arginine headgroup

The self-assembly in aqueous solution of the alanine-rich peptide A12R2 containing twelve alanine residues and two arginine residues has been investigated. This oligomeric peptide was synthesized via NCA-polymerization methods. The surfactant-like peptide is found via FTIR to form antiparallel dimers which aggregate into twisted fibrils, as revealed by cryogenic-transmission electron microscopy. The fibril substructure is probed via detailed X-ray scattering experiments, and are uniquely comprised of twisted tapes only 5 nm wide, set by the width of the antiparallel A12R2 dimers. The packing of the alanine residues leads to distinct “β-sheet” spacings compared to those for amyloid-forming peptides. For this peptide, β-sheet structure coexists with some α-helical content. These ultrafine amyloid fibrils present arginine at high density on their surfaces, and this may lead to applications in nanobiotechnology.

Ionically interacting nanoclay and nanofibrillated cellulose lead to tough bulk nanocomposites in compression by forced self-assembly

Several approaches have recently been shown for self-assembled biomimetic composite films, aiming at combinations of high toughness, strength, and stiffness. However, it remains challenging to achieve high toughness using simple processes especially for bulk materials. We demonstrate that ionically interacting cationic native nanofibrillated cellulose (C-NFC) and anionic nanoclay, i.e. montmorillonite (MTM), allow local self-assemblies by a simple centrifugation process to achieve 3D bulk materials. The composite with MTM/C-NFC of 63/37 w/w has a high compressive strain to failure of 37% with distinct plastic deformation behaviour, a high work to fracture of 23.1 MJ m-3, and a relatively high compression strength of 76 MPa. Unlike the conventionally used sequential deposition methods to achieve well-defined layers for the oppositely charged units as limited to films, the present one-step method allows quick formation of bulk materials and leads to local self-assemblies, however, having a considerable amount of nanovoids and defects between them. We suggest that the nanovoids and defects promote the plastic deformation and toughness. Considering the simple preparation method and bio-based origin of NFC, we expect that the present tough bulk nanocomposites in compression have potential in applications for sustainable and environmentally friendly materials in construction and transportation.