Jardel Francisco Mazzi-Chaves

New Methodology to Evaluate Bond Strength of Root-End Filling Materials

This study evaluated the bond strength of root-end filling materials to root-end cavities using a new methodology. Twenty maxillary central incisors were subjected to biomechanical preparation (#80 hand file) and sectioned transversally 2 mm short of the apex and 4 mm coronally to this point. The root cylinders were embedded in acrylic resin and positioned at 45° to the horizontal plane for preparation of root-end cavities with a diamond ultrasonic retrotip. Two groups (n=10) were formed according to the root-end filling material: MTA and Super EBA. A gutta-percha cone (#80) was tug-backed at the limit between the canal and the root-end cavity. The cavity was filled and the gutta-percha cone was removed after complete setting of the sealer. The specimens were placed in an Instron machine with the root-end filling turned downwards. The push-out shaft was inserted in the space previously occupied by the gutta-percha cone and run at a crosshead speed of 1.0 mm/min for pushing out the root-end filling material. Data were analyzed by ANOVA (α=5%). Super EBA (6.03±1.31) presented higher bond strength (MPa) than MTA (1.81±0.45) (p>0.05). There was a predominance of cohesive failures for Super EBA and mixed for MTA. The protocol of specimen preparation is effective and introduces a specific methodology for assessing bond strength of root-end filling materials to dentin. Among the materials, Super EBA presented the highest bond strength.

Micro–computed Tomographic Evaluation of the Shaping Ability of XP-endo Shaper, iRaCe, and EdgeFile Systems in Long Oval-shaped Canals

Introduction: This study evaluated the shaping ability of the XP‐endo Shaper (FKG Dentaire SA, La Chaux‐de‐Fonds, Switzerland), iRaCe (FKG Dentaire SA), and EdgeFile (EdgeEndo, Albuquerque, NM) systems using micro–computed tomographic (micro‐CT) technology. Methods: Thirty long oval‐shaped canals from mandibular incisors were matched anatomically using micro‐CT scanning (SkyScan1174v2; Bruker‐microCT, Kontich, Belgium) and distributed into 3 groups (n = 10) according to the canal preparation protocol (ie, XP‐endo Shaper, iRaCe, and EdgeFile systems). Coregistered images, before and after preparation, were evaluated for morphometric measurements of the volume, surface area, structure model index (SMI), untouched walls, area, perimeter, roundness, and diameter. Data were statistically compared between groups using the 1‐way analysis of variance post hoc Tukey test and within groups with the paired sample t test (&agr; = 5%). Results: Within groups, preparation significantly increased all tested parameters (P < .05). No statistical difference was observed in the mean percentage increase of the volume (˜52%) and surface area (10.8%–14.2%) or the mean percentage of the remaining unprepared canal walls between groups (8.17%–9.83%) (P > .05). The XP‐endo Shaper significantly altered the overall geometry of the root canal to a more conical shape (SMI = 2.59) when compared with the other groups (P < .05). After preparation protocols, changes in area, perimeter, roundness, and minor and major diameters of the root canals in the 5 mm of the root apex showed no difference between groups (P > .05). Conclusions: The XP‐endo Shaper, iRaCe, and EdgeFile systems showed a similar shaping ability. Despite the XP‐endo Shaper had significantly altered the overall geometry of the root canal to a more conical shape, neither technique was capable of completely preparing the long oval‐shaped canals of mandibular incisors.

Micro-CT evaluation of root and canal morphology of mandibular first premolars with radicular grooves

The aim of this study was to evaluate morphological features of 70 single-rooted mandibular first premolars with radicular grooves (RG) using micro-CT technology. Teeth were scanned and evaluated regarding the morphology of the roots and root canals as well as length, depth and percentage frequency location of the RG. Volume, surface area and Structure Model Index (SMI) of the canals were measured for the full root length. Two-dimensional parameters and frequency of canal orifices were evaluated at 1, 2, and 3 mm levels from the apical foramen. The number of accessory canals, the dentinal thickness, and cross-sectional appearance of the canal at different root levels were also recorded. Expression of deep grooves was observed in 21.42% of the sample. Mean lengths of root and RG were 13.43 mm and 8.5 mm, respectively, while depth of the RG ranged from 0.75 to 1.13 mm. Mean canal volume, surface area and SMI were 10.78 mm3, 58.51 mm2, and 2.84, respectively. Apical delta was present in 4.35% of the sample and accessory canals were observed mostly at the middle and apical thirds. Two-dimensional parameters indicated an oval-shaped cross-sectional appearance of the root canal with a high percentage frequency of canal divisions (87.15%). Canal configuration type V (58.57%) was the most prevalent. C-shaped configuration was observed in 13 premolars (18.57%), whereas dentinal thickness ranged from 1.0 to 1.31 mm. Radicular grooves in mandibular first premolars was associated with the occurrence of several anatomical complexities, including C-shaped canals and divisions of the main root canal.

Push-out bond strength of different tricalcium silicate-based filling materials to root dentin

The aim of this study was to evaluate the bond strength of different triccalcium silicate cements to retrograde cavity using a push out test. Thirty maxillary central incisors were shaped using #80 hand files and sectioned transversally. Root slices were obtained from the apical 4 mm after eliminating the apical extremity. The specimens were embedded in acrylic resin and positioned at 45° to the horizontal plane for preparation of root-end cavities with a diamond ultrasonic retrotip. The samples were divided into three groups according to the root-end filling material (n = 10): MTA Angelus, ProRoot MTA and Biodentine. A gutta-percha cone (#80) was tugged-back at the limit between the canal and the root-end cavity. The root-end cavity was filled and the gutta-percha cone was removed after complete setting of the materials. The specimens were placed in an Instron machine with the root-end filling turned downwards. The push-out shaft was inserted in the space previously occupied by the gutta-percha cone and push out testing was performed at a crosshead speed of 1.0 mm/min. There was no statistically significant difference in resistance to push out by the materials tested (p > 0.01). MTA Angelus and ProRoot MTA showed predominantly mixed failure while Biodentine exhibited mixed and cohesive failures. The tricalcium silicate-based root-end filling materials showed similar bond strength retrograde cavity.

Influence Of Genetic Polymorphisms In Genes Of Bone Remodeling And Angiogenesis Process In The Apical Periodontitis

Persistent apical periodontitis (AP) is a situation involving an inflammatory and immune response caused mainly by anaerobic polymicrobial infection of the root canal system and the outcome and follow-up of the root canal treatment has been reported as intimately related to host response. The apical periodontitis repair might be associated with genetic polymorphisms. This study aimed to evaluate the association between HIF1A genetic polymorphisms (rs2301113 and rs2057482) with PAP in Brazilian patients. Subjects with at least 1 year of follow-up after root canal therapy (RCT) were recalled. Sixty-four subjects with signs/symptoms of PAP and 84 subjects with root canal-treated teeth exhibiting healthy perirradicular tissues (healed) were included. Genomic DNA was extracted from saliva and used for HIF1A genotyping by real-time PCR. Genotype and allele frequencies were compared by c2 or Fishers exact tests and odds ratio was implemented, using Epi Info 3.5.2. All tests were performed with an established alpha of 0.05. There was no association between allele and genotype distribution for HIF1As polymorphisms and PAP (p>0.05). The genetic polymorphisms in HIF1A were not associated with persistent apical periodontitis.

Current trends of genetics in apical periodontitis research

Genetics is an emerging topic in endodontic research focusing on the host response regarding the pathogenesis of apical periodontitis (AP). A number of genetic epidemiological studies carried out by many investigators worldwide have shown evidence of an association between certain candidate genes and AP. Some studies have been conducted on knockout mice with a deficiency in certain proteins, leading to more or less severe AP, and thus suggesting a pivotal role of these genes in AP pathogenesis. Other research has evaluated the association between genetic polymorphisms in humans with different AP aspects; these studies pointed out that genetic polymorphisms in some candidate genes are involved in inter-individual variations in their response to AP. Therefore, the objective of this report was to provide an updated overview of the genes involved in AP pathogenesis, with a focus on the most relevant candidate genes.

Mechanical Preparation Showed Superior Shaping Ability than Manual Technique in Primary Molars - A Micro-Computed Tomography Study

The aim of the study was to evaluate canal preparation in primary molars with hand files, ProTaper Next and Self-Adjusting File (SAF) by 2D and 3D micro-computed tomography (micro-CT) analysis. Canals of 24 primary molars were prepared with hand files (HF), ProTaper Next (PTN) and SAF (n=8/group). The teeth were scanned before and after root canal preparation and the pre- and postoperative micro-CT images were reconstructed. Changes in 2D (area, perimeter, roundness, minor and major diameter) and 3D [volume, surface area, structure model index (SMI)] morphological parameters, as well as canal transportation and lateral perforations were evaluated (Kruskal-Wallis and ANOVA; a=0.05). SAF presented smaller changes in minor diameter, volume and surface area compared with HF and PTN (p<0.05). PTN presented more circular canals after preparation. 3D analysis revealed greater transportation in HF. PTN and SAF presented more centered canal preparation, especially in curved areas. SAF and HF presented, respectively, the lowest (0.05±0.02 and 0.07±0.04) and highest (0.14±0.11 and 0.29±0.17) apical transportation. There were fewer lateral perforations in SAF (4.2%) and PTN (7.7%) than in HF (47.8%) (p<0.05). In primary molars, mechanical preparation showed better shaping ability than hand files, promoting more centered preparations and lower occurrence of lateral perforations and canal transportation. CLINICAL RELEVANCE Manual instrumentation is still reported as the main choice in the primary teeth preparation; however, studies have shown limitations in its use. The morphological characteristics of primary teeth and the limited knowledge of shaping procedures in these teeth using mechanical preparation become a challenge for clinical practice and might impair the predictability of endodontic treatment.