Javier Hernández-Ferrer

Controlled chemistry of tailored graphene nanoribbons for electrochemistry: a rational approach to optimizing molecule detection

This work describes a rationalization of the interactions between two fully characterized graphene nanoribbons (GNRs) and a set of significant target molecules. The GNRs were carefully synthesized by unzipping multi-walled carbon nanotubes (MWCNTs) to yield graphene oxide nanoribbons (GNRox) containing 44 wt% oxygen. The GNRox were reduced to yield reduced graphene oxide nanoribbons (GNRred) containing 14 wt%. Each material was characterized by atomic force microscopy, transmission electronic microscopy, Raman spectroscopy, X-ray diffraction, Fourier transform infrared spectroscopy, X-ray photoelectron spectroscopy and voltammetry techniques. Differential pulse voltammetry was used to assess the detection of two strategically selected groups of molecules, including benzenediols, hydroquinone, catechol, and resorcinol, as well as, L-dopa, ascorbic acid, uric acid, and L-tyrosine. The results showed that GNRs provided significantly better electrochemical responses compared to MWCNTs and the non-modified glassy carbon electrode. The chemistry of the few layers of graphene strongly influenced the electrochemical properties of the material. GNRox may be the material of choice for sensing molecules having high oxidation potentials. GNRred, on the other hand, yielded an excellent sensitivity for aromatic molecules in which π–π interactions were dominant or the number of conjugated 1,2-diols present was high. GNRred combines the advantages of the high proportion of sp2-carbon atoms with the presence of a few oxygen moieties remaining in the lattice after the reduction step. The primary interactions responsible for the shift in oxidation potentials were elucidated. This work presents new opportunities for tailoring graphene to a particular sensing application based on the specific chemistry of the molecule.

Graphene oxide nanoribbon-based sensors for the simultaneous bio-electrochemical enantiomeric resolution and analysis of amino acid biomarkers.

In this work, a straightforward in-situ measurement of L and D-amino acids (AAs) has been developed using disposable graphene oxide nanoribbon (GON) screen printed electrodes. For that, we took advantage of the electroactivity of certain clinically relevant AAs, such as tyrosine (Tyr) and methionine (Met), which are involved in important bacterial diseases (Bacillus subtilis and Vibrio cholera, respectively). The strategy is based on a dual electrochemical and enzymatic approach. The D-AA with the class enzyme D amino acid oxidase (DAAO) generates H2O2. This H2O2 is simultaneously detected with the L-AA, electroactive molecule by differential pulse voltammetry (DPV). These GON disposable platforms use just 50 μL of sample and a total analysis time of 360 s. Both L and D enantiomers calibration and quantitative analysis were explored and were simultaneously detected with accuracy and precision in urine samples. Any interference of uric acid and other electroactive AAs was noticed. This proposed electrochemical GON-based enantiomeric bio-sensor becomes a highly promising tool as future point of care for fast and reliable early diagnosis of diseases related to the presence of D-AAs.

Electrochemical sensing of guanine, adenine and 8-hydroxy-2′-deoxyguanosine at glassy carbon modified with single-walled carbon nanotubes covalently functionalized with lysine

This work reports the synthesis and characterization of single-walled carbon nanotubes (SWCNT) covalently functionalized with L-lysine (Lys) and the analytical performance of glassy carbon electrodes (GCE) modified with a dispersion of SWCNT-Lys (GCE/SWCNT-Lys) for the highly sensitive quantification of guanine, adenine and 8-hydroxy-2′-deoxyguanosine. Detection limits of 75, 195 and 97 nM were obtained for guanine, adenine and 8-hydroxy-2′-deoxyguanosine, respectively by voltammetric adsorptive stripping with medium exchange. GCE/SWCNT-Lys was successfully used for the detection of adenine and guanine oxidation after adsorption of salmon sperm-double stranded DNA. A clear definition of 8-hydroxy-2′-deoxyguanosine oxidation signal is observed even in the presence of large excess of guanine, adenine or salmon sperm-double stranded DNA.

Peptide-based biomaterials. Linking L-tyrosine and poly L-tyrosine to graphene oxide nanoribbons

Peptide-based biomaterials are being studied actively in a variety of applications in materials science and biointerface engineering. Likewise, there has been ongoing exploration over the last few decades into the potential biological applications of carbon nanomaterials, motivated by their size, shape, structure and their unique physical and chemical properties. In recent years, the functionalization of carbon nanotubes and graphene has led to the preparation of bioactive carbon nanomaterials that are being used in biomedicine as structural elements and in gene therapy and biosensing. The present study proposes different strategies for the bonding of l-tyrosine and the homopolypeptide poly-l-tyrosine to graphene oxide nanoribbons (GONRs). The covalent attachment of l-tyrosine was undertaken by amidation of the α-amine group of tyrosine with the existing carboxylic groups in GONR and by means of esterification through phenol nucleophiles contained in their side chains. In both cases use was made of protective groups to address the functionalization with the desired reactive groups. The linking of GONRs to the PTyr was attempted according to two different strategies: either by ester bonding of commercial PTyr through its phenol side groups or by in situ ring-opening polymerization of an N-carboxyanhydride tyrosine derivative (NCA-Tyr) with Tyr-functionalized GONRs. These biofunctionalized nanomaterials were characterized by Raman and infrared spectroscopies, X-ray photoelectron spectroscopy, thermogravimetric analysis, transmission electron microscopy, fluorescence and electrochemical techniques. On the basis of their properties, prospects for the potential utilization of the prepared hybrid nanomaterials in different applications are also given.

Study of neuron survival on polypyrrole‐embedded single‐walled carbon nanotube substrates for long‐term growth conditions

Cultures of primary embryonic rat brain hippocampus neurons with supporting glia cells were carried out on different substrates containing polypyrrole (PPy) and/or single-walled carbon nanotubes (SWCNTs). Neuron adhesion, neurites and dendrites branching elongation, and development of neuron networks on substrates were followed by phase-contrast optical microscopy and quantified to state cell survival and proliferation. Suspensions of as-grown and purified SWCNTs were sprayed on a glass coverslips and PPy/SWCNTs were deposited by potentiodynamic electrochemical deposition. Cell neurotoxicity revealed by neuron death was very high for purified SWCNTs substrates in good agreement with [3-(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide] (MTT) test showing lower viability on SWCNTs containing substrates compared with PPy-substrates and control samples probably due to the metal content and the carboxylic groups introduced during the purification. It is interesting to highlight that neurons grown on PPy-substrates adhere developing neurites and branching dendrites earlier even than on control cultures. On subsequent days the neurons are able to adapt to nanotube substrates developing neuron networks for 14-day cultures with similar patterns of complexity for control, PPy and PPy/SWCNT substrates. PPy/SWCNT substrates show a lower impedance value at frequencies under 1 Hz. We have come to the conclusion that glia cells and PPy added to the culture medium and substrates respectively, improve in some degree nanotube biocompatibility, cell adhesion and hence cell viability.

Carbon Nanotubes as Suitable Interface for Improving Neural Recordings

In the last decades, system neuroscientists around the world have dedicated their research to understand how neuronal networks work and how they malfunction in various diseases. Furthermore in the last years we have seen a progressively increased interaction of brain networks with external devices either for the use of brain computer interfaces or through the currently extended brain stimulation (e.g. transcranial magnetic stimulation) for therapy. Both techniques have evidenced even more the need for a better understanding of neuronal networks. These studies have resulted in the development of different strategies to under‐ stand the ongoing neuronal activity, such as fluorescence microscopy for genetic labelling and optogenetic techniques, imaging techniques, or the recording/stimulation with increas‐ ingly large numbers of electrodes in the whole brain or in both cell cultured neurons and slice preparations. It is in these last two areas where the technology developed on microelectrode arrays, commonly called multi-electrode arrays (MEAs), has become important over other technologies [1–3].

Self-assembled core-shell CdTe/poly(3-hexylthiophene) nanoensembles as novel donor-acceptor light harvesting systems

The self-assembly of novel core-shell nanoensembles consisting of regioregular poly(3-hexylthiophene) nanoparticles (P3HTNPs) of 100 nm as core and semiconducting CdTe quantum dots (CdTeQDs) as shell with a thickness of a few tens of nanometers was accomplished by employing a reprecipitation approach. The structure, morphology, and composition of CdTeQDs/P3HTNPs nanoensembles were confirmed by high-resolution scanning transmission microscopy and dynamic light-scattering studies. Intimate interface contact between the CdTeQDs shell and the P3HTNPs core leads to the stabilization of the CdTeQDs/P3HTNPs nanoensemble as probed by the steady-state absorption spectroscopy. Effective quenching of the characteristic photoluminescence of CdTeQDs at 555 nm, accompanied by simultaneous increase in emission of P3HTNPs at 660 and 720 nm, reveals photoinduced charge-transfer processes. Probing the redox properties of films of CdTeQDs/P3HTNPs further proves the formation of a stabilized core-shell system in the solid state. Photoelectrochemical assays on CdTeQDs/P3HTNPs films show a reversible on-off photoresponse at a bias voltage of +0.8 V with a 3 times increased photocurrent compared to CdTeQDs. The improved charge separation is directly related to the unique core-shell configuration, in which the outer CdTeQDs shell forces the P3HTNPs core to effectively act as electron acceptor. The creation of novel donor-acceptor core-shell hybrid materials via self-assembly is transferable to other types of conjugated polymers and semiconducting nanoparticles. This work, therefore, opens new pathways for the design of improved optoelectronic devices.