Javier O. Morales

Singlet Oxygen Reactions with Flavonoids. A Theoretical – Experimental Study

Detection of singlet oxygen emission, λmax = 1270 nm, following laser excitation and steady-state methods were employed to measure the total reaction rate constant, kT, and the reactive reaction rate constant, kr, for the reaction between singlet oxygen and several flavonoids. Values of kT determined in deuterated water, ranging from 2.4×107 M−1s−1 to 13.4×107 M−1s−1, for rutin and morin, respectively, and the values measured for kr, ranging from 2.8×105 M−1s−1 to 65.7×105 M−1s−1 for kaempferol and morin, respectively, being epicatechin and catechin chemically unreactive. These results indicate that all the studied flavonoids are good quenchers of singlet oxygen and could be valuable antioxidants in systems under oxidative stress, in particular if a flavonoid-rich diet was previously consumed. Analysis of the dependence of rate constant values with molecular structure in terms of global descriptors and condensed Fukui functions, resulting from electronic structure calculations, supports the formation of a charge transfer exciplex in all studied reactions. The fraction of exciplex giving reaction products evolves through a hydroperoxide and/or an endoperoxide intermediate produced by singlet oxygen attack on the double bond of the ring C of the flavonoid.

Films loaded with insulin-coated nanoparticles (ICNP) as potential platforms for peptide buccal delivery.

The goal of this investigation was to develop films containing insulin-coated nanoparticles and evaluate their performance in vitro as potential peptide delivery systems. To incorporate insulin into the films, a new antisolvent co-precipitation fabrication process was adapted to obtain insulin-coated nanoparticles (ICNPs). The ICNPs were embedded in polymeric films containing a cationic polymethacrylate derivative (ERL) or a combination of ERL with hydroxypropyl methylcellulose (HPMC). ICNP-loaded films were characterized for morphology, mucoadhesion, and insulin release. Furthermore, in vitro insulin permeation was evaluated using a cultured tridimensional human buccal mucosa model. The antisolvent co-precipitation method was successfully adapted to obtain ICNPs with 40% (w/w) insulin load, achieving 323±8nm particles with a high zeta potential of 32.4±0.8mV, indicating good stability. High yields were obtained after manufacture and the insulin content did not decrease after one month storage. ICNP-embedded films using ERL as the polymer matrix presented excellent mucoadhesive and insulin release properties. A high permeation enhancement effect was observed for ICNP-loaded ERL films in comparison with ICNP-loaded ERL-HPMC films and a control insulin solution. ICNP-loaded ERL formulations were found to be more effective in terms of film performance and insulin permeation through the human buccal mucosa model, and thus are a promising delivery system for buccal administration of a peptide such as insulin.

Nanoparticles for the Treatment of Wounds

The treatment of skin wounds represents an important research area due to the important physiological and aesthetic role of this tissue. During the last years, nanoparticles have emerged as important platforms to treat skin wounds. Silver, gold, and copper nanoparticles, as well as titanium and zinc oxide nanoparticles, have shown potential therapeutic effects on wound healing. Due to their specific characteristics, nanoparticles such as nanocapsules, polymersomes, solid lipid nanoparticles, and polymeric nanocomplexes are ideal vehicles to improve the effect of drugs (antibiotics, growth factors, etc.) aimed at wound healing. On the other hand, if active excipients are added during the formulation, such as hyaluronate or chitosan, the nanomedicine could significantly improve its potential. In addition, the inclusion of nanoparticles in different pharmaceutical materials may enhance the beneficial effects of the formulations, and allow achieving a better dose control. This paper aims at reviewing significant findings in the area of nanoparticles and wound treatment. Among the reviewed topics, we underline formulations comprising inorganic, polymeric, surfactant self-assembled, and lipid nanosystems. Among the drugs included in the nanoformulations, the paper refers to antibiotics, natural extracts, proteins, and growth factors, among others. Finally, the paper also addresses nanoparticles embedded in secondary vehicles (fibers, dressings, hydrogels, etc.) that could improve their application and/or upgrade the release profile of the active.

Novel strategies for the buccal delivery of macromolecules

Abstract For years now, the delivery of small molecules through the buccal mucosal route has been described in the literature, but it has only been over the past decade that investigations into macromolecule delivery via the buccal route have sharply increased. The administration of macromolecules such as proteins and peptides, antibodies, or nucleic acids by buccal administration would be greatly enhanced due to the avoidance of the gastrointestinal conditions, rapid uptake into systemic circulation, as well as the potential for controlled drug delivery. Since macromolecules are faced with a number of specific challenges related to permeation through the epithelium, several strategies have been employed historically to improve their buccal absorption and subsequent bioavailability. Several conventional strategies to improve macromolecule penetration include the use of chemical permeation enhancers, enzyme inhibitors and the use of mucoadhesive materials acting as carriers. More recent approaches include the incorporation of the macromolecule as part of nanostructured delivery systems to further enhance targeting and delivery. This review focuses on the different permeation enhancing strategies as well as formulation design that are tailored to meet the challenges of active macromolecule delivery using the buccal mucosal route of administration.

Challenges and Future Prospects for the Delivery of Biologics: Oral Mucosal, Pulmonary, and Transdermal Routes

Biologic products are large molecules such as proteins, peptides, nucleic acids, etc., which have already produced many new drugs for clinical use in the last decades. Due to the inherent challenges faced by biologics after oral administration (e.g., acidic stomach pH, digestive enzymes, and limited permeation through the gastrointestinal tract), several alternative routes of administration have been investigated to enable sufficient drug absorption into systemic circulation. This review describes the buccal, sublingual, pulmonary, and transdermal routes of administration for biologics with relevant details of the respective barriers. While all these routes avoid transit through the gastrointestinal tract, each has its own strengths and weaknesses that may be optimal for specific classes of compounds. Buccal and sublingual delivery enable rapid drug uptake through a relatively permeable barrier but are limited by small epithelial surface area, stratified epithelia, and the practical complexities of maintaining a drug delivery system in the mouth. Pulmonary delivery accesses the highly permeable and large surface area of the alveolar epithelium but must overcome the complexities of safe and effective delivery to the alveoli deep in the lung. Transdermal delivery offers convenient access to the body for extended-release delivery via the skin surface but requires the use of novel devices and formulations to overcome the skin’s formidable stratum corneum barrier. New technologies and strategies advanced to overcome these challenges are reviewed, and critical views in future developments of each route are given.

Lipid nanoparticles for the topical delivery of retinoids and derivatives

Retinoids are lipophilic compounds that are highly used in cosmetics/therapeutics for skin disorders. Conventional formulations are limited by poor water solubility, high chemical/photochemical instability and the irritation of retinoids. Interestingly, lipid nanoparticles enable the administration of retinoids in aqueous media, providing drug stabilization and controlled release. Recently, it has been demonstrated that retinoids in solid lipid nanoparticles, nanostructured lipid carriers, nanoemulsions and nanocapsules can decrease degradation, improve targeting and enhance efficacy for the treatment of skin disorders. This article focuses on the formulation, fabrication, characterization and in vitro/in vivo evaluation of solid lipid nanoparticles, nanostructured lipid carriers, nanoemulsions and nanocapsules loaded with retinoids for skin administration. Furthermore, the incorporation of these lipid nanoparticles into secondary vehicles is discussed.

Overview and Future Potential of Buccal Mucoadhesive Films as Drug Delivery Systems for Biologics

The main route of administration for drug products is the oral route, yet biologics are initially developed as injectables due to their limited stability through the gastrointestinal tract and solubility issues. In order to avoid injections, a myriad of investigations on alternative administration routes that can bypass enzymatic degradation and the first-pass effect are found in the literature. As an alternative site for biologics absorption, the buccal route presents with a number of advantages. The buccal mucosa is a barrier, providing protection to underlying tissue, but is more permeable than other alternative routes such as the skin. Buccal films are polymeric matrices designed to be mucoadhesive properties and usually formulated with permeability enhancers to improve bioavailability. Conventionally, buccal films for biologics are manufactured by solvent casting, yet recent developments have shown the potential of hot melt extrusion, and most recently ink jet printing as promising strategies. This review aims at depicting the field of biologics-loaded mucoadhesive films as buccal drug delivery systems. In light of the literature available, the buccal epithelium is a promising route for biologics administration, which is reflected in clinical trials currently in progress, looking forward to register and commercialize the first biologic product formulated as a buccal film.

Buccal delivery of small molecules and biologics: of mucoadhesive polymers, films, and nanoparticles

HIGHLIGHTSThe buccal route has been exploited for selected potent small molecules.Research to achieve buccal insulin delivery is based on avoiding the GIT.Buccal insulin clinical trials have led to variable results with no FDA approvals.There is a rationale for buccal delivery of glucagon‐like peptide 1 analogues.Development of printed films is timely and offer an opportunity for complex systems. &NA; Buccal delivery of macromolecules (biologics) sets a great challenge for researchers. Although several niche small molecule products have been approved as simple sprays, tablets and oral films, it is not simply a case of adapting existing technologies to biologics. Buccal delivery of insulin has reached clinical trials with two approaches: oromucosal sprays of the peptide with permeation enhancers, and embedded gold nanoparticles in a dissolvable film. However, neither of these approaches have led to FDA approvals likely due to poor efficacy, submaximal peptide loading in the dosage form, and to wide intra‐subject variability in pharmacokinetics and pharmacodynamics. It is likely however that printed film designs with lower molecular weight stable biotech payloads including lipophilic glucagon‐like 1 (GLP‐1) agonists and macrocycles with long half‐lives will generate greater efficacy than was achieved to date for insulin.

Effect of plasticizers on the physico-mechanical properties of pullulan based pharmaceutical oral films

&NA; The effect of different plasticizers (glycerol, vitamin E TPGS and triacetin) and their concentrations on the physico‐mechanical properties of pullulan based oral films was studied. A full factorial (32) design of experiments was used. Elastic modulus, tensile strength, elongation at break and disintegration time were selected as response variables. Modulated differential scanning calorimeter (MDSC) was used for determining glass transition temperature (Tg) of pullulan films. The surface morphology of films was evaluated by SEM, while ATR‐FTIR was used to obtain a molecular level understanding of polymer‐plasticizer interactions. The DoE analysis allowed for the modelling of tensile strength and elongation at break. The highest elongations were observed in glycerol at 20% w/w. Majority of the films disintegrated within one minute without significant differences. ATR‐FTIR spectra of pullulan alone and different plasticizer blend films show characteristic molecular interactions. The present study concluded that glycerol is suitable plasticizer compared to others for manufacturing pullulan based oral films. Graphical abstract Figure. No caption available.

Nanomedicine and nanotoxicology: the pros and cons for neurodegeneration and brain cancer.

Current strategies for brain diseases are mostly symptomatic and noncurative. Nanotechnology has the potential to facilitate the transport of drugs across the blood-brain barrier and to enhance their pharmacokinetic profile. However, to reach clinical application, an understanding of nanoneurotoxicity in terms of oxidative stress and inflammation is required. Emerging evidence has also shown that nanoparticles have the ability to alter autophagy, which can induce inflammation and oxidative stress, or vice versa. These effects may increase neurodegenerative processes damage, but on the other hand, they may have benefits for brain cancer therapies. In this review, we emphasize how nanomaterials may induce neurotoxic effects focusing on neurodegeneration, and how these effects could be exploited toward brain cancer treatment.