Jean-Philippe Rheault

THE CARNEGIE SUPERNOVA PROJECT: SECOND PHOTOMETRY DATA RELEASE OF LOW-REDSHIFT TYPE Ia SUPERNOVAE

The Carnegie Supernova Project (CSP) is a five-year survey being carried out at the Las Campanas Observatory to obtain high-quality light curves of ~100 low-redshift Type Ia supernovae (SNe Ia) in a well-defined photometric system. Here we present the first release of photometric data that contains the optical light curves of 35 SNe Ia, and near-infrared light curves for a subset of 25 events. The data comprise 5559 optical (ugriBV) and 1043 near-infrared (Y JHKs ) data points in the natural system of the Swope telescope. Twenty-eight SNe have pre-maximum data, and for 15 of these, the observations begin at least 5 days before B maximum. This is one of the most accurate data sets of low-redshift SNe Ia published to date. When completed, the CSP data set will constitute a fundamental reference for precise determinations of cosmological parameters, and serve as a rich resource for comparison with models of SNe Ia.

Spectrophotometric calibration system for DECam

We present a spectrophotometric calibration system that will be implemented as part of the DES DECam project at the Blanco 4 meter at CTIO. Our calibration system uses a 2nm wide tunable source to measure the instrumental response function of the telescope from 300nm up to 1100nm. The system consists of a monochromator based tunable light source that is projected uniformly on a Lambertian screen using a broadband “line to spot“ fiber bundle and an engineered diffuser. Several calibrated photodiodes strategically positioned along the beam path will allow us to measure the throughput as a function of wavelength. Our system has an output power of 0.25 mW, equivalent to a flux of approximately 100 photons/s/pixel on DECam. We also present results from the deployment of a prototype of this system at the Swope 1m at Las Campanas Observatory for the calibration of the photometric equipment used in the Carnegie Supernova Project.

VIRUS instrument enclosures

The Visible Integral-Field Replicable Unit Spectrograph (VIRUS) instrument will be installed at the Hobby-Eberly Telescope† in the near future. The instrument will be housed in two enclosures that are mounted adjacent to the telescope, via the VIRUS Support Structure (VSS). We have designed the enclosures to support and protect the instrument, to enable servicing of the instrument, and to cool the instrument appropriately while not adversely affecting the dome environment. The system uses simple HVAC air handling techniques in conjunction with thermoelectric and standard glycol heat exchangers to provide efficient heat removal. The enclosures also provide power and data transfer to and from each VIRUS unit, liquid nitrogen cooling to the detectors, and environmental monitoring of the instrument and dome environments. In this paper, we describe the design and fabrication of the VIRUS enclosures and their subsystems.

GMACS: a Wide Field, Multi-Object, Moderate-Resolution, Optical Spectrograph for the Giant Magellan Telescope

We present a conceptual design for a moderate resolution optical spectrograph for the Giant Magellan Telescope (GMT). The spectrograph is designed to make use of the large field-of-view of the GMT and be suitable for observations of very faint objects across a wide range of optical wavelengths. We show some details of the optical and mechanical design of the instrument.

Characterization of the Reflectivity of Various Black Materials

We present total and specular reflectance measurements of various materials that are commonly (and uncommonly) used to provide baffling and/or to minimize the effect of stray light in optical systems. More specifically, we investigate the advantage of using certain black surfaces and their role in suppressing stray light on detectors in optical systems. We measure the total reflectance of the samples over a broad wavelength range (250 < λ < 2500 nm) that is of interest to astronomical instruments in the ultraviolet, visible, and near-infrared regimes. Additionally, we use a helium-neon laser to measure the specular reflectance of the samples at various angles. Finally, we compare these two measurements and derive the specular fraction for each sample.

VIRUS Instrument Collimator Assembly

The Visual Integral-Field Replicable Unit Spectrograph (VIRUS) instrument is a baseline array 150 identical fiber fed optical spectrographs designed to support observations for the Hobby-Eberly Telescope Dark Energy Experiment (HETDEX). The collimator subassemblies of the instrument have been assembled in a production line and are now complete. Here we review the design choices and assembly practices used to produce a suite of identical low-cost spectrographs in a timely fashion using primarily unskilled labor.

aTmcam: a simple atmospheric transmission monitoring camera for sub 1% photometric precision

Traditional color and airmass corrections can typically achieve ~0.02 mag precision in photometric observing conditions. A major limiting factor is the variability in atmospheric throughput, which changes on timescales of less than a night. We present preliminary results for a system to monitor the throughput of the atmosphere, which should enable photometric precision when coupled to more traditional techniques of less than 1% in photometric conditions. The system, aTmCam, consists of a set of imagers each with a narrow-band filter that monitors the brightness of suitable standard stars. Each narrowband filter is selected to monitor a different wavelength region of the atmospheric transmission, including regions dominated by the precipitable water, aerosol optical depth, etc. We have built a prototype system to test the notion that an atmospheric model derived from a few color indices measurements can be an accurate representation of the true atmospheric transmission. We have measured the atmospheric transmission with both narrowband photometric measurements and spectroscopic measurements; we show that the narrowband imaging approach can predict the changes in the throughput of the atmosphere to better than ~10% across a broad wavelength range, so as to achieve photometric precision less than 0.01 mag.

The Carnegie Supernova Project. I. Third Photometry Data Release of Low-redshift Type Ia Supernovae and Other White Dwarf Explosions

We present final natural system optical (ugriBV) and near-infrared (YJH) photometry of 134 supernovae (SNe) with probable white dwarf progenitors that were observed in 2004-2009 as part of the first stage of the Carnegie Supernova Project (CSP-I). The sample consists of 123 Type Ia SNe, 5 Type Iax SNe, 2 super-Chandrasekhar SN candidates, 2 Type Ia SNe interacting with circumstellar matter, and 2 SN 2006bt-like events. The redshifts of the objects range from z = 0.0037 to 0.0835; the median redshift is 0.0241. For 120 (90%) of these SNe, near-infrared photometry was obtained. Average optical extinction coefficients and color terms are derived and demonstrated to be stable during the five CSP-I observing campaigns. Measurements of the CSP-I near-infrared bandpasses are also described, and near-infrared color terms are estimated through synthetic photometry of stellar atmosphere models. Optical and near-infrared magnitudes of local sequences of tertiary standard stars for each supernova are given, and a new calibration of Y-band magnitudes of the Persson et al. (1998) standards in the CSP-I natural system is presented.

MooSci: A Lunar Scintillometer

MooSci is a linear array of photodiodes that measures time varying intensities of light reflected from the Moon, lunar scintillation. The covariance between all possible pairs of photodiodes can be used to reconstruct the ground layer turbulence profile from the ground up to a maximum height roughly determined by the distance between the furthest pair of detectors. This technique of profile restoration will be used for site testing at various locations. This paper describes the design of a lunar scintillometer and preliminary results from Las Campanas Peak.

PreCam, a Precursor Observational Campaign for Calibration of the Dark Energy Survey

ABSTRACT.PreCam, a precursor observational campaign supporting the Dark Energy Survey (DES), is designed to produce a photometric and astrometric catalog of nearly a hundred thousand standard stars within the DES footprint, while the PreCam instrument also serves as a prototype testbed for the Dark Energy Camera’s hardware and software. This catalog represents a potential 100-fold increase in Southern Hemisphere photometric standard stars, and therefore will be an important component in the calibration of the Dark Energy Survey. We provide details on the PreCam instrument’s design, construction, and testing, as well as results from a subset of the 51 nights of PreCam survey observations on the University of Michigan Department of Astronomy’s Curtis-Schmidt telescope at Cerro Tololo Inter-American Observatory (CTIO). We briefly describe the preliminary data processing pipeline that has been developed for PreCam data and the preliminary results of the instrument performance, as well as astrometry and photom...