Jean-Pierre Veder

Evidence for a Surface Confined Ion-to-Electron Transduction Reaction in Solid-Contact Ion-Selective Electrodes Based on Poly(3-octylthiophene)

The ion-to-electron transduction reaction mechanism at the buried interface of the electrosynthesized poly(3-octylthiophene) (POT) solid-contact (SC) ion-selective electrode (ISE) polymeric membrane has been studied using synchrotron radiation-X-ray photoelectron spectroscopy (SR-XPS), near edge X-ray absorption fine structure (NEXAFS), and electrochemical impedance spectroscopy (EIS)/neutron reflectometry (NR). The tetrakis[3,5-bis(triflouromethyl)phenyl]borate (TFPB(-)) membrane dopant in the polymer ISE was transferred from the polymeric membrane to the outer surface layer of the SC on oxidation of POT but did not migrate further into the oxidized POT SC. The TFPB(-) and oxidized POT species could only be detected at the outer surface layer (≤14 Ǻ) of the SC material, even after oxidation of the electropolymerized POT SC for an hour at high anodic potential demonstrating that the ion-to-electron transduction reaction is a surface confined process. Accordingly, this study provides the first direct structural evidence of ion-to-electron transduction in the electropolymerized POT SC ISE by proving TFPB(-) transport from the polymeric ISE membrane to the oxidized POT SC at the buried interface of the SC ISE. It is inferred that the performance of the POT SC ISE is independent of the thickness of the POT SC but is instead contingent on the POT SC surface reactivity and/or electrical capacitance of the POT SC. In particular, the results suggest that the electropolymerized POT conducting polymer may spontaneously form a mixed surface/bulk oxidation state, which may explain the unusually high potential stability of the resulting ISE. It is anticipated that this new understanding of ion-to-electron transduction with electropolymerized POT SC ISEs will enable the development of new and improved devices with enhanced analytical performance attributes.

Transport, electrochemical and thermophysical properties of two N-donor-functionalised ionic liquids

Two N-donor-functionalised ionic liquids (ILs), 1-ethyl-1,4-dimethylpiperazinium bis(trifluoromethylsulfonyl)amide (1) and 1-(2-dimethylaminoethyl)-dimethylethylammonium bis(trifluoromethylsulfonyl)amide (2), were synthesised and their electrochemical and transport properties measured. The data were compared with the benchmark system, N-butyl-N-methylpyrrolidinium bis(trifluoromethylsulfonyl)amide (3). Marked differences in thermal and electrochemical stability were observed between the two tertiary-amine-functionalised salts and the non-functionalised benchmark. The former are up to 170 K and 2 V less stable than the structural counterpart lacking a tertiary amine function. The ion self-diffusion coefficients (Di ) and molar conductivities (Λ) are higher for the IL with an open-chain cation (2) than that with a cyclic cation (1), but less than that with a non-functionalised, heterocyclic cation (3). The viscosities (η) show the opposite behaviour. The Walden [Λ[proportionality](1/η)(t) ] and Stokes-Einstein [Di /T)[proportionality](1/η)(t) ] exponents, t, are very similar for the three salts, 0.93-0.98 (±0.05); that is, the self-diffusion coefficients and conductivity are set by η. The Di for 1 and 2 are the same, within experimental error, at the same viscosity, whereas Λ for 1 is approximately 13% higher than that of 2. The diffusion and molar conductivity data are consistent, with a slope of 0.98±0.05 for a plot of ln(ΛT) against ln(D+ +D- ). The Nernst-Einstein deviation parameters (Δ) are such that the mean of the two like-ion VCCs is greater than that of the unlike ions. The values of Δ are 0.31, 0.36 and 0.42 for 3, 1 and 2, respectively, as is typical for ILs, but there is some subtlety in the ion interactions given 2 has the largest value. The distinct diffusion coefficients (DDC) follow the order D(d)__ < D(d)++ < D(d)+_, as is common for [Tf2N](-) salts. The ion motions are not correlated as in an electrolyte solution: instead, there is greater anti-correlation between the velocities of a given anion and the overall ensemble of anions in comparison to those for the cationic analogue, the anti-correlation for the velocities of which is in turn greater than that for a given ion and the ensemble of oppositely charged ions, an observation that is due to the requirement for the conservation of momentum in the system. The DDC also show fractional SE behaviour with t~0.95.

Fabrication of core–shell, yolk–shell and hollow Fe3O4@carbon microboxes for high-performance lithium-ion batteries

Metal oxide–carbon composites with core–shell, yolk–shell and hollow structures have attracted enormous interest because of their applications in lithium-ion batteries. However, the relationship between structure and battery performance is still unclear. Herein, we report the designed synthesis of unique core–shell, yolk–shell and hollow Fe3O4@carbon microboxes through a one-step Stober coating method, followed by a carbonization process. Different calcination temperatures were investigated to manipulate the various structures, and the impact of layer thickness on the battery performance was also assessed. Our results showed that the core–shell structured Fe3O4@carbon microboxes with nitrogen-doped carbon shells having a thickness of 15 nm exhibited an excellent performance in lithium-ion batteries with a high reversible capacity of 857 mA h g−1 that could be retained after 100 cycles at a current density of 0.1 A g−1.

Synchrotron Radiation/Fourier Transform-Infrared Microspectroscopy Study of Undesirable Water Inclusions in Solid-Contact Polymeric Ion-Selective Electrodes

This paper reports on three-dimensional synchrotron radiation/Fourier transform-infrared microspectroscopy (SR/FT-IRM) imaging studies of water inclusions at the buried interface of solid-contact-ion-selective electrodes (SC-ISEs). It is our intention to describe a nondestructive method that may be used in surface studies of the buried interfaces of materials, especially multilayers of polymers. Herein, we demonstrate the power of SR/FT-IRM for studying water inclusions at the buried interfaces of SC-ISEs. A poly(methyl methacrylate)-poly(decyl methacyrlate) [PMMA-PDMA] copolymer revealed the presence of micrometer sized inclusions of water at the gold/membrane interface, while a coupling of a hydrophobic solid contact of poly(3-octylthiophene 2,5-diyl) (POT) prevented the accumulation of water at the buried interface. A similar study with a poly (3,4-ethylenedioxythiophene)/poly (styrenesulfonate) [PEDOT/PSS] solid contact also revealed an absence of distinct micrometer-sized pools of water; however, there were signs of absorption of water accompanied by swelling of the PEDOT/PSS underlayer, and these membrane zones are enriched with respect to water.

Water uptake in the hydrophilic poly(3,4-ethylenedioxythiophene):poly(styrene sulfonate) solid-contact of all-solid-state polymeric ion-selective electrodes

Solid-contact (SC) ion-selective electrodes (ISEs) utilizing thin films of poly(3,4-ethylenedioxythiophene):poly(styrenesulfonate) (PEDOT:PSS) and plasticized poly(vinylchloride) (PVC) have been produced using a spin casting procedure. This study was carried out with a view of characterizing this popular and well known SC ISE using a series of complementary surface analysis techniques. This work revealed that PEDOT:PSS prevents the separation of an undesirable water layer at the buried interface of this SC ISE due to the high miscibility of water in the hydrophilic PEDOT:PSS layer. The lack of a clearly defined and molecularly sharp buried interface prohibits the formation of a distinct water layer presumably by eliminating sites that promote the accumulation of water. This outcome is important to the chemical sensor community since it provides further insights into the compatibility of sensor components in SC ISEs.

Design and synthesis of porous ZnTiO3/TiO2 nanocages with heterojunctions for enhanced photocatalytic H2 production

Despite the tremendous potential applications of hollow micro/nanostructures, their composition has been limited to mainly single chemical compounds. Inspired by recent innovations in the areas of metal organic frameworks (MOFs) and nanocoating, here, we report the rational synthesis of mesoporous ZnTiO3/TiO2 hollow polyhedra (MZTHP) obtained by hydrothermal treatment of zeolitic imidazolate framework-8 (ZIF-8)@TiO2 core–shell polyhedral particles. The subsequent calcination of these particles caused phase transformation from TiO2 to ZnTiO3 and eventually induced the formation of Zn2TiO4. In addition, the fabrication of these hollow structures revealed a way for the preparation of hollow polyhedral photocatalysts with Pt nanoparticles deposited onto their external surface (PHS-1) or encapsulated inside their hollow structures (PHS-2). Importantly, these two types of Pt-decorated nanoparticles are shown to exhibit an improved yet distinctly different performance for photocatalytic hydrogen production, highlighting that the photocatalytic activity correlates with the Pt location and dispersion.

The influence of thermal degradation on the electrodeposition of aluminium from an air- and water-stable ionic liquid

Aluminium electrodeposition is demonstrated from a thermally degraded ionic liquid solution. NMR and voltammetric analyses established that Al(3+) reduction was remarkably similar to that in non-degraded IL solutions suggesting that the electroactive metal-containing species was unaffected by heat treatment. Electron microscopy revealed a significant grain refinement of the deposited metal.

A Combined Voltammetric and Synchrotron Radiation-Grazing Incidence X-ray Diffraction Study of the Electrocrystallization of Zinc Tetracyanoquinodimethane

The in situ electrocrystallization of zinc tetracyanoquinodimethane (TCNQ) has been explored using synchrotron radiation-grazing incidence X-ray diffraction (SR-GIXRD) at potentials in the region of the cyclic voltammetric peak where reduction of TCNQ to TCNQ– occurs at a Pt electrode in acetonitrile (0.1 M [NBu4][PF6]) solution containing Zn(NO3)2·6H2O. The in situ SR-GIXRD data along with ex situ IR and Raman spectroscopy results all confirmed the formation of the kinetically favoured phase of Zn[TCNQ]2(H2O)2 as the product.

Intracellular speciation of gold nanorods alters the conformational dynamics of genomic DNA

Gold nanorods are one of the most widely explored inorganic materials in nanomedicine for diagnostics, therapeutics and sensing1. It has been shown that gold nanorods are not cytotoxic and localize within cytoplasmic vesicles following endocytosis, with no nuclear localization2,3, but other studies have reported alterations in gene expression profiles in cells following exposure to gold nanorods, via unknown mechanisms4. In this work we describe a pathway that can contribute to this phenomenon. By mapping the intracellular chemical speciation process of gold nanorods, we show that the commonly used Au–thiol conjugation, which is important for maintaining the noble (inert) properties of gold nanostructures, is altered following endocytosis, resulting in the formation of Au(i)–thiolates that localize in the nucleus5. Furthermore, we show that nuclear localization of the gold species perturbs the dynamic microenvironment within the nucleus and triggers alteration of gene expression in human cells. We demonstrate this using quantitative visualization of ubiquitous DNA G-quadruplex structures, which are sensitive to ionic imbalances, as an indicator of the formation of structural alterations in genomic DNA.The release of nuclear-localizing gold species from intracellular gold nanorods may alter gene expression on interaction with the genomic DNA.

Hierarchically porous cobalt-carbon nanosphere-in-microsphere composites with tunable properties for catalytic pollutant degradation and electrochemical energy storage

Unreliable energy supply and environmental pollution are two major concerns of the human society in this century. Herein, we report a rational approach on preparation of hierarchically-structured cobalt-carbon composites with tunable properties for a number of applications. A facile hydrothermal treatment of cobalt nitrate and sucrose results in the formation of a metallic cobalt-amorphous carbon composite with cobalt nanospheres anchored homogenously on an amorphous carbon substrate. Tuning the calcination conditions in air will generate either a metallic cobalt-cobalt oxide core-shell structure with magnetism or a fully oxidized Co3O4 composite. The different materials are demonstrated as anodes for lithium-ion batteries (LIBs) and catalysts for advanced oxidation-based wastewater remediation. A fully oxidized composite (FC@CS, fully oxidized Co loaded on carbon spheres) as a LIB anode exhibits superior electrochemical performance, possessing a high reversible capacity, high initial columbic efficiency, outstanding cycling performance and excellent rate capability. The anode performance is superior to most reported Co3O4-based electrodes. Meanwhile, the partially oxidized composite (PC@CS, partially oxidized Co loaded on carbon spheres) functions as an efficient and stable catalyst for removal of phenol via peroxymonosulfate (PMS) activation, which is demonstrated via electron paramagnetic resonance (EPR) and quenching experiments for generation of radicals. More importantly, the recycled PC@CS can be further applied as a LIBs anode after full oxidation regeneration, performing comparably to FC@CS. This FC@CS → PC@CS → FC@CS transformation provides an innovative approach for efficient material synthesis, recycling and application.