Jean-Sebastien Bouillard

Low-temperature plasmonics of metallic nanostructures.

The requirements for spatial and temporal manipulation of electromagnetic fields on the nanoscale have recently resulted in an ever-increasing use of plasmonics for achieving various functionalities with superior performance to those available from conventional photonics. For these applications, ohmic losses resulting from free-electron scattering in the metal is one major limitation for the performance of plasmonic structures. In the low-frequency regime, ohmic losses can be reduced at low temperatures. In this work, we study the effect of temperature on the optical response of different plasmonic nanostructures and show that the extinction of a plasmonic nanorod metamaterial can be efficiently controlled with temperature with transmission changes by nearly a factor of 10 between room and liquid nitrogen temperatures, while temperature effects in plasmonic crystals are relatively weak (transmission changes only up to 20%). Because of the different nature of the plasmonic interactions in these types of plasmonic nanostructures, drastically differing responses (increased or decreased extinction) to temperature change were observed despite identical variations of the metals permittivity.

Broadband and broadangle SPP antennas based on plasmonic crystals with linear chirp

Plasmonic technology relies on the coupling of light to surface electromagnetic modes on smooth or structured metal surfaces. While some applications utilise the resonant nature of surface polaritons, others require broadband characteristics. We demonstrate unidirectional and broadband plasmonic antennas with large acceptance angles based on chirped plasmonic gratings. Near-field optical measurements have been used to visualise the excitation of surface plasmon polaritons by such aperiodic structures. These weakly aperiodic plasmonic crystals allow the formation of a trapped rainbow-type effect in a two-dimensional geometry as surface polaritons of different frequencies are coherently excited in different locations over the plasmonic structure. Both the crystals finite size and the finite lifetime of plasmonic states are crucial for the generation of broadband surface plasmon polaritons. This approach presents new opportunities for building unidirectional, broadband and broad-angle plasmonic couplers for sensing purposes, information processing, photovoltaic applications and shaping and manipulating ultrashort optical pulses.

Hyperspectral imaging with scanning near-field optical microscopy: applications in plasmonics.

We present the realisation of near-field spectroscopic measurements with fibre-tip-based scanning near-field microscopy. It allows the simultaneous acquisition of near-field images in a broad spectral range (400 nm to 1000 nm), thus recovering local spectroscopic information. This technique is essential in order to understand the resonant interaction of light with nanostructured material as the far-field and near-field spectral response can differ significantly, e.g., in the case of plasmonic nanostructures. Several example applications of hyperspectral near-field imaging are given for visualisation of Bloch modes in plasmonic crystals and plasmon-assisted transmission through a slit.

Opening the light extraction cone of high index substrates with plasmonic gratings: Light emitting diode applications

The opening of the light extraction cone of a high index substrate (GaP) is demonstrated using plasmonic gratings. We show that the excitation of surface plasmons on the metal grating leads to the extraction of light otherwise undergoing total internal reflection in the substrate with high efficiency. This effect has an immediate application in the context of light emitting diodes, where resonant metal gratings are promising for the design of dual purpose electric contact/extraction structures.

Optically-programmable nonlinear photonic component for dielectric-loaded plasmonic circuitry

We demonstrate both experimentally and numerically a compact and efficient, optically tuneable plasmonic component utilizing a surface plasmon polariton ring resonator with nonlinearity based on trans-cis isomerization in a polymer material. We observe more than 3-fold change between high and low transmission states of the device at milliwatt control powers (∼100 W/cm2 by intensity), with the performance limited by switching speed of the material. Such plasmonic components can be employed in optically programmable and reconfigurable integrated photonic circuitry.

Optical transmission of periodic annular apertures in metal film on high-refractive index substrate: The role of the nanopillar shape

The influence of annular aperture parameters on the optical transmission through arrays of coaxial apertures in a metal film on high refractive index substrates has been investigated experimentally and numerically. It is shown that the transmission resonances are related to plasmonic crystal effects rather than frequency cutoff behavior associated with annular apertures. The role of deviations from ideal aperture shape occurring during the fabrication process has also been studied. Annular aperture arrays are often considered in many applications for achieving high optical transmission through metal films and understanding of nanofabrication tolerances are important.

Integrated plasmonic circuitry on a vertical-cavity surface-emitting semiconductor laser platform

Integrated plasmonic sources and detectors are imperative in the practical development of plasmonic circuitry for bio- and chemical sensing, nanoscale optical information processing, as well as transducers for high-density optical data storage. Here we show that vertical-cavity surface-emitting lasers (VCSELs) can be employed as an on-chip, electrically pumped source or detector of plasmonic signals, when operated in forward or reverse bias, respectively. To this end, we experimentally demonstrate surface plasmon polariton excitation, waveguiding, frequency conversion and detection on a VCSEL-based plasmonic platform. The coupling efficiency of the VCSEL emission to waveguided surface plasmon polariton modes has been optimized using asymmetric plasmonic nanostructures. The plasmonic VCSEL platform validated here is a viable solution for practical realizations of plasmonic functionalities for various applications, such as those requiring sub-wavelength field confinement, refractive index sensitivity or optical near-field transduction with electrically driven sources, thus enabling the realization of on-chip optical communication and lab-on-a-chip devices.

Hybrid FIB milling strategy for the fabrication of plasmonic nanostructures on semiconductor substrates.

The optical properties of plasmonic semiconductor devices fabricated by focused ion beam (FIB) milling deteriorate because of the amorphisation of the semiconductor substrate. This study explores the effects of combining traditional 30 kV FIB milling with 5 kV FIB patterning to minimise the semiconductor damage and at the same time maintain high spatial resolution. The use of reduced acceleration voltages is shown to reduce the damage from higher energy ions on the example of fabrication of plasmonic crystals on semiconductor substrates leading to 7-fold increase in transmission. This effect is important for focused-ion beam fabrication of plasmonic structures integrated with photodetectors, light-emitting diodes and semiconductor lasers.

Light extraction beyond total internal reflection using one-dimensional plasmonic crystals

We demonstrate the application of plasmonic crystals for extracting light trapped in the substrate due to total internal reflection (TIR). The broadband transmission properties of one-dimensional plasmonic crystals have been investigated, both experimentally and numerically, beyond the TIR critical angle in order to reveal the role of plasmonic modes in this process. Through optimisation of the traditional square slit unit cell geometry of the crystals, transmission coefficients of up to 47% were obtained in the TIR regime. An U-shaped cell geometry with a few nm thick continuous film was found to significantly modify the plasmonic modes of the crystal in addition to exhibiting highly tuneable, structurally dispersive transmission peaks, further increasing transmission in the TIR regime up to 56%. Such structures exhibit better than glass transparency at the design wavelength when integrated over all incident angles.

Shaping plasmon beams via the controlled illumination of finite-size plasmonic crystals

Plasmonic crystals provide many passive and active optical functionalities, including enhanced sensing, optical nonlinearities, light extraction from LEDs and coupling to and from subwavelength waveguides. Here we study, both experimentally and numerically, the coherent control of SPP beam excitation in finite size plasmonic crystals under focussed illumination. The correct combination of the illuminating spot size, its position relative to the plasmonic crystal, wavelength and polarisation enables the efficient shaping and directionality of SPP beam launching. We show that under strongly focussed illumination, the illuminated part of the crystal acts as an antenna, launching surface plasmon waves which are subsequently filtered by the surrounding periodic lattice. Changing the illumination conditions provides rich opportunities to engineer the SPP emission pattern. This offers an alternative technique to actively modulate and control plasmonic signals, either via micro- and nano-electromechanical switches or with electro- and all-optical beam steering which have direct implications for the development of new integrated nanophotonic devices, such as plasmonic couplers and switches and on-chip signal demultiplexing. This approach can be generalised to all kinds of surface waves, either for the coupling and discrimination of light in planar dielectric waveguides or the generation and control of non-diffractive SPP beams.