Jeanne M. Hankett

Molecular Level Understanding of Adhesion Mechanisms at the Epoxy/Polymer Interfaces

It is important to understand the buried interfacial structures containing epoxy underfills as such structures determine the interfacial adhesion properties. Weak adhesion or delamination at such interfaces leads to failure of microelectronic devices. Sum frequency generation (SFG) vibrational spectroscopy was used to examine buried interfaces at polymer/model epoxy and polymer/commercial epoxy resins (used as underfills in flip chip devices) at the molecular level. We investigated a model epoxy: bisphenol A digylcidyl ether (BADGE) at the interfaces of poly (ethylene terephthalate) (PET) before and after curing. Furthermore, small amounts of different silanes including (3-glycidoxypropyl) trimethoxysilane (γ-GPS), (3-Aminopropyl)trimethoxysilane (ATMS), Octadecyltrimethoxysilane (OTMS(18C)), and Octyltrimethoxysilane (OTMS(8C)) were mixed with BADGE. Silane influences on the polymer/epoxy interfacial structures were studied. SFG was also used to study molecular interfacial structures between polymers and two commercial epoxy resins. The interfacial structures probed by SFG were correlated to the adhesion strengths measured for corresponding interfaces. The results indicated that a small amount of silane molecules added to epoxy could substantially change the polymer/epoxy interfacial structure, greatly affecting the adhesion strength at the interface. It was found that ordered methyl groups at the interface lead to weak adhesion, and disordered interfaces lead to strong adhesion.

Molecular surface structural changes of plasticized PVC materials after plasma treatment.

In this research, a variety of analytical techniques including sum frequency generation vibrational spectroscopy (SFG), coherent anti-Stokes Raman spectroscopy (CARS), and X-ray photoelectron spectroscopy (XPS) have been employed to investigate the surface and bulk structures of phthalate plasticized poly(vinyl chloride) (PVC) at the molecular level. Two types of phthalate molecules with different chain lengths, diethyl phthalate (DEP) and dibutyl phthalate (DBP), mixed with PVC in various weight ratios were examined to verify their different surface and bulk behaviors. The effects of oxygen and argon plasma treatment on PVC/DBP and PVC/DEP hybrid films were investigated on both the surface and bulk of films using SFG and CARS to evaluate the different plasticizer migration processes. Without plasma treatment, SFG results indicated that more plasticizers segregate to the surface at higher plasticizer bulk concentrations. SFG studies also demonstrated the presence of phthalates on the surface even at very low bulk concentration (5 wt %). Additionally, the results gathered from SFG, CARS, and XPS experiments suggested that the PVC/DEP system was unstable, and DEP molecules could leach out from the PVC under low vacuum after several minutes. In contrast, the PVC/DBP system was more stable; the migration process of DBP out of PVC could be effectively suppressed after oxygen plasma treatment. XPS results indicated the increase of C═O/C-O groups and decrease of C-Cl functionalities on the polymer surface after oxygen plasma treatment. The XPS results also suggested that exposure to argon plasma induced chemical bond breaking and formation of cross-linking or unsaturated groups with chain scission on the surface. Finally, our results indicate the potential risk of using DEP molecules in PVC since DEP can easily leach out from the polymeric bulk.

Photochemical origins of burn-in degradation in small molecular weight organic photovoltaic cells

Using a combination of Fourier transform infrared (FTIR) spectroscopy and physics-based degradation models, we find that the early aging of small molecular weight organic photovoltaic (OPV) cells is due to photochemical degradation of the C60 acceptor layer. Planar and mixed boron subphthalocyanine chloride (SubPc)-donor/C60-acceptor heterojunctions show significant changes in their IR absorption spectra after aging under illumination, which we find is due to exciton-mediated photo-oligomerization of C60. The consequent decrease in exciton diffusion length in the C60 layer results from a decreased exciton lifetime for C60 oligomers (e.g. C120 and C180) compared to that of the monomer. The model describes the short-circuit current reduction in planar SubPc/C60 OPV cells during early aging, and explains the lack of degradation in analogous mixed heterojunctions.

Molecular Structural Changes of Plasticized PVC after UV Light Exposure

Plasticized poly(vinyl chloride) (PVC) materials for industrial, medical, and household use are often intentionally exposed to UV light, though its impact on the molecular integrity and toxicity of the surface and bulk of PVC materials is still not well understood. This paper investigates the surface and bulk molecular changes of plasticized PVC films with 25, 10, or 0 wt % bis-2-ethylhexyl phthalate (DEHP) plasticizer after exposure to short wave (254 nm) or long wave (365 nm) UV light. Surface analytical techniques including sum frequency generation vibrational spectroscopy (SFG) revealed short wave UV exposure induced major molecular changes on the plasticized PVC surfaces, resulting in increased surface hydrophilicity and decreased CH3 content with increasing exposure time. Additionally, it was deduced from multiple techniques that the surface and the bulk of the plastic exposed to short wave UV contained phthalic monoesters and phthalic acid formed from multistep radical reactions. In contrast, when exposed to long wave UV, molecular content and ordering on the surfaces of the plastic remained relatively unchanged and the introduction of DEHP in plastic helped protect PVC chains from degradation. Results from this study demonstrate short wave UV exposure will result in plastic surfaces containing phthalates and phthalate-related products accessible to contact by living organisms.

Sum Frequency Generation and Coherent Anti-Stokes Raman Spectroscopic Studies on Plasma-Treated Plasticized Polyvinyl Chloride Films

Polyvinyl chloride (PVC) is a widely used polymer to which various phthalates are extensively applied as plasticizers. PVC materials are often treated with plasma to vary the hydrophobicity or for cleaning purposes, but little is known of the nature of the surface molecular structures after treatment. This research characterizes molecular surface structures of PVC and bis-2-ethylhexyl phthalate (DEHP)-plasticized PVC films in air before annealing, after annealing, and after exposure to air-generated glow discharge plasma using sum frequency generation (SFG) vibrational spectroscopy. In addition, we compare the vibrational molecular signatures on the surfaces of PVC with DEHP (at a variety of percent loadings) to those of the bulk detected using coherent anti-Stokes Raman scattering (CARS). X-ray photoelectron spectroscopy (XPS) and contact angle measurements have been used to analyze PVC surfaces to supplement SFG data. Our results indicate that DEHP was found on the surfaces of PVC films even at low weight percentages (5 wt %) and that DEHP segregates on surfaces after annealing. The treatment of these films with glow discharge plasma resulted in surface-sensitive reactions involving the removal of chlorine atoms, the addition of oxygen atoms, and C-H bond rearrangement. CARS data demonstrate that the bulk of our films remained undisturbed during the plasma treatment. For the first time, we probed the molecular structure of the surface and the bulk of a PVC material using combined SFG and CARS studies on the same sample in exactly the same environment. In addition, the methodology used in this research can be applied to characterize various plasticizers in a wide variety of polymer systems to understand their surface and bulk structures before and after systematic applications of heat, plasma, or other treatments.

Preparation of photoactive ZnGeP2 nanowire films

Photoactive ZnGeP2 nanowires have been prepared by solid-source sublimation chemical vapor deposition using Sn catalysts. Nanowire films with areas >0.5 cm2 on Si(100) and Si(111) substrates were deposited with variable nanowire length and diameter. Transmission electron microscopy (TEM), scanning TEM (STEM), and polarized Raman microscopy indicated nanowires exhibited single-crystal character and compositional homogeneity. Photoelectrochemical measurements performed in an aqueous electrolyte indicated the as-prepared ZnGeP2 nanowires were p-type and capable of passing sustained cathodic photocurrents under white light illumination. The presented results identify a straight-forward approach to the preparation of II–IV–V2 nanowire films with features suitable for optical and photoelectrochemical energy conversion/storage applications.

Low-Volatility Model Demonstrates Humidity Affects Environmental Toxin Deposition on Plastics at a Molecular Level.

Despite the ever-increasing prevalence of plastic debris and endocrine disrupting toxins in aquatic ecosystems, few studies describe their interactions in freshwater environments. We present a model system to investigate the deposition/desorption behaviors of low-volatility lake ecosystem toxins on microplastics in situ and in real time. Molecular interactions of gas-phase nonylphenols (NPs) with the surfaces of two common plastics, poly(styrene) and poly(ethylene terephthalate), were studied using quartz crystal microbalance and sum frequency generation vibrational spectroscopy. NP point sources were generated under two model environments: plastic on land and plastic on a freshwater surface. We found the headspace above calm water provides an excellent environment for NP deposition and demonstrate significant NP deposition on plastic within minutes at relevant concentrations. Further, NP deposits and orders differently on both plastics under humid versus dry environments. We attributed the unique deposition behaviors to surface energy changes from increased water content during the humid deposition. Lastly, nanograms of NP remained on microplastic surfaces hours after initial NP introduction and agitating conditions, illustrating feasibility for plastic-bound NPs to interact with biota and surrounding matter. Our model studies reveal important interactions between low-volatility environmental toxins and microplastics and hold potential to correlate the environmental fate of endocrine disrupting toxins in the Great Lakes with molecular behaviors.