Jeffrey L. Hendricks

Electrochemical polymerization of conducting polymers in living neural tissue

A number of biomedical devices require extended electrical communication with surrounding tissue. Significant improvements in device performance would be achieved if it were possible to maintain communication with target cells despite the reactive, insulating scar tissue that forms at the device-tissue interface. Here, we report that the conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) can be polymerized directly within living neural tissue resulting in an electrically conductive network that is integrated within the tissue. Nano and microscale PEDOT filaments extend out from electrode sites, presumably forming within extracellular spaces. The cloud of PEDOT filaments penetrates out into the tissue far enough that it should be possible to bypass fibrous scar tissue and contact surrounding healthy neurons. These electrically functional, diffuse conducting polymer networks grown directly within tissue signify a new paradigm for creating soft, low impedance implantable electrodes.

Poly(3,4-ethylenedioxythiophene) (PEDOT) polymer coatings facilitate smaller neural recording electrodes.

We investigated using poly(3,4-ethylenedioxythiophene) (PEDOT) to lower the impedance of small, gold recording electrodes with initial impedances outside of the effective recording range. Smaller electrode sites enable more densely packed arrays, increasing the number of input and output channels to and from the brain. Moreover, smaller electrode sizes promote smaller probe designs; decreasing the dimensions of the implanted probe has been demonstrated to decrease the inherent immune response, a known contributor to the failure of long-term implants. As expected, chronically implanted control electrodes were unable to record well-isolated unit activity, primarily as a result of a dramatically increased noise floor. Conversely, electrodes coated with PEDOT consistently recorded high-quality neural activity, and exhibited a much lower noise floor than controls. These results demonstrate that PEDOT coatings enable electrode designs 15 µm in diameter.

In Vitro and In Vivo Evaluation of PEDOT Microelectrodes for Neural Stimulation and Recording

Cortical neural prostheses require chronically implanted small-area microelectrode arrays that simultaneously record and stimulate neural activity. It is necessary to develop new materials with low interface impedance and large charge transfer capacity for this application and we explore the use of conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) for the same. We subjected PEDOT coated electrodes to voltage cycling between -0.6 and 0.8 V, 24 h continuous biphasic stimulation at 3 mC/cm2 and accelerated aging for four weeks. Characterization was performed using cyclic voltammetry, electrochemical impedance spectroscopy, and voltage transient measurements. We found that PEDOT coated electrodes showed a charge injection limit 15 times higher than Platinum Iridium (Ptlr) electrodes and electroplated Iridium Oxide (IrOx) electrodes when using constant current stimulation at zero voltage bias. In vivo chronic testing of microelectrode arrays implanted in rat cortex revealed that PEDOT coated electrodes show higher signal-to-noise recordings and superior charge injection compared to Ptlr electrodes.

The Morphology of Poly(3,4-Ethylenedioxythiophene)

Poly(3,4-ethylene dioxythiophene) (PEDOT) is a chemically stable, conjugated polymer that is of considerable interest for a variety of applications including coatings for interfacing electronic biomedical devices with living tissue. Here, we describe recent work from our laboratory and elsewhere to investigate the morphology of PEDOT in the solid state. We discuss the importance of oxidative chemical and electrochemical polymerization, as well as the critical role of the counterion used during synthesis and film deposition. We have obtained information about the morphology of PEDOT from a number of different complimentary techniques including X-ray diffraction, optical microscopy, scanning electron microscopy, transmission high-resolution electron microscopy, and low-voltage electron microscopy. We also discuss results from ultraviolet-visible light spectroscopy (UV-Vis), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy (XPS). PEDOT is a relatively rigid polymer that packs in the solid state at a characteristic face-to-face distance (010) of ∼0.34 nm, similar to graphite. These sheets of oriented PEDOT molecules are separated from one another by ∼1.4 nm laterally, with the (100) distance between layers quite sensitive to the choice of counterion used during sample preparation. The order in the films is typically modest, although this also depends on the counterion used and the method of film deposition. The films can be organized into useful structures with a variety of nanoscale dissolvable templates (including fibers, particles, and lyotropic mesophases). When PEDOT is electrochemically deposited in the presence of bromine counterions, highly ordered crystalline phases are observed. It is also possible to deposit PEDOT around living cells, both in vitro and in vivo.

Poly(3,4-ethylenedioxythiophene) as a Micro-Neural Interface Material for Electrostimulation

Chronic microstimulation-based devices are being investigated to treat conditions such as blindness, deafness, pain, paralysis, and epilepsy. Small-area electrodes are desired to achieve high selectivity. However, a major trade-off with electrode miniaturization is an increase in impedance and charge density requirements. Thus, the development of novel materials with lower interfacial impedance and enhanced charge storage capacity is essential for the development of micro-neural interface-based neuroprostheses. In this report, we study the use of conducting polymer poly(3,4-ethylenedioxythiophene) (PEDOT) as a neural interface material for microstimulation of small-area iridium electrodes on silicon-substrate arrays. Characterized by electrochemical impedance spectroscopy, electrodeposition of PEDOT results in lower interfacial impedance at physiologically relevant frequencies, with the 1 kHz impedance magnitude being 23.3 ± 0.7 kΩ, compared to 113.6 ± 3.5 kΩ for iridium oxide (IrOx) on 177 μm2 sites. Further, PEDOT exhibits enhanced charge storage capacity at 75.6 ± 5.4 mC/cm2 compared to 28.8 ± 0.3 mC/cm2 for IrOx, characterized by cyclic voltammetry (50 mV/s). These improvements at the electrode interface were corroborated by observation of the voltage excursions that result from constant current pulsing. The PEDOT coatings provide both a lower amplitude voltage and a more ohmic representation of the applied current compared to IrOx. During repetitive pulsing, PEDOT-coated electrodes show stable performance and little change in electrical properties, even at relatively high current densities which cause IrOx instability. These findings support the potential of PEDOT coatings as a micro-neural interface material for electrostimulation.

Layered carbon nanotube-polyelectrolyte electrodes outperform traditional neural interface materials.

The safety, function, and longevity of implantable neuroprosthetic and cardiostimulating electrodes depend heavily on the electrical properties of the electrode-tissue interface, which in many cases requires substantial improvement. While different variations of carbon nanotube materials have been shown to be suitable for neural excitation, it is critical to evaluate them versus other materials used for bioelectrical interfacing, which have not been done in any study performed so far despite strong interest to this area. In this study, we carried out this evaluation and found that composite multiwalled carbon nanotube-polyelectrolyte (MWNT-PE) multilayer electrodes substantially outperform in one way or the other state-of-the-art neural interface materials available today, namely activated electrochemically deposited iridium oxide (IrOx) and poly(3,4-ethylenedioxythiophene) (PEDOT). Our findings provide the concrete experimental proof to the much discussed possibility that carbon nanotube composites can serve as excellent new material for neural interfacing with a strong possibility to lead to a new generation of implantable electrodes.

The use of a dual PEDOT and RGD-functionalized alginate hydrogel coating to provide sustained drug delivery and improved cochlear implant function

Cochlear implants provide hearing by electrically stimulating the auditory nerve. Implant function can be hindered by device design variables, including electrode size and electrode-to-nerve distance, and cochlear environment variables, including the degeneration of the auditory nerve following hair cell loss. We have developed a dual-component cochlear implant coating to improve both the electrical function of the implant and the biological stability of the inner ear, thereby facilitating the long-term perception of sound through a cochlear implant. This coating is a combination of an arginine-glycine-aspartic acid (RGD)-functionalized alginate hydrogel and the conducting polymer poly(3, 4-ethylenedioxythiophene) (PEDOT). Both in vitro and in vivo assays on the effects of these electrode coatings demonstrated improvements in device performance. We found that the coating reduced electrode impedance, improved charge delivery, and locally released significant levels of a trophic factor into cochlear fluids. This coating is non-cytotoxic, clinically relevant, and has the potential to significantly improve the cochlear implant users experience.

Localized Cell and Drug Delivery for Auditory Prostheses

Localized cell and drug delivery to the cochlea and central auditory pathway can improve the safety and performance of implanted auditory prostheses (APs). While generally successful, these devices have a number of limitations and adverse effects including limited tonal and dynamic ranges, channel interactions, unwanted stimulation of non-auditory nerves, immune rejection, and infections including meningitis. Many of these limitations are associated with the tissue reactions to implanted auditory prosthetic devices and the gradual degeneration of the auditory system following deafness. Strategies to reduce the insertion trauma, degeneration of target neurons, fibrous and bony tissue encapsulation, and immune activation can improve the viability of tissue required for AP function as well as improve the resolution of stimulation for reduced channel interaction and improved place-pitch and level discrimination. Many pharmaceutical compounds have been identified that promote the viability of auditory tissue and prevent inflammation and infection. Cell delivery and gene therapy have provided promising results for treating hearing loss and reversing degeneration. Currently, many clinical and experimental methods can produce extremely localized and sustained drug delivery to address AP limitations. These methods provide better control over drug concentrations while eliminating the adverse effects of systemic delivery. Many of these drug delivery techniques can be integrated into modern auditory prosthetic devices to optimize the tissue response to the implanted device and reduce the risk of infection or rejection. Together, these methods and pharmaceutical agents can be used to optimize the tissue-device interface for improved AP safety and effectiveness.

Femtosecond pulsed laser patterning of poly(3,4-ethylene dioxythiophene)-poly(styrenesulfonate) thin films on gold/palladium substrates

Femtosecond pulsed laser damage studies were performed on poly(3,4-ethylene dioxythiophene)-poly(styrenesulfonate) (PEDOT-PSS) films of varying thickness on Au∕Pd substrates. The femtosecond laser induced damage thresholds of the PEDOT-PSS films were determined (0.007–0.03J∕cm2) and were found to behave similarly to metallic conductors as a function of film thickness. Femtosecond laser patterning of the PEDOT-PSS films was also performed, with minimum wire widths of 1.4μm produced at speeds of 1mm∕s. Discrete removal of the PEDOT-PSS films from the underlying substrate was also demonstrated, with the film cleared down to the depth of the substrate in linear channels as narrow as 4μm while maintaining the integrity of the substrate.

Patterning of periodic nano-cavities on PEDOT–PSS using nanosphere-assisted near-field optical enhancement and laser interference lithography

A simple approach for creating periodic nano-cavities and periodic stripes of nano-cavity arrays on poly (3,4-ethylene dioxythiophene)-poly(styrenesulfonate) (PEDOT-PSS) thin films using a combination of optical near-field enhancement through self-assembled silica nanospheres and laser interference lithography is presented. Monolayers of close-packed silica nanospheres (800, 600, and 430 nm in diameter) are self-assembled on 2 µm thick PEDOT-PSS electropolymerized films and are subsequently irradiated with 10 ns pulses of 355 nm wavelength laser light. Over areas spanning 2 cm(2), circular nano-cavities with central holes of size 50-200 nm and surrounding craters of size 100-400 nm are formed in the PEDOT-PSS films directly underneath the nanospheres due to strong enhancement (11-18 fold) of the incident light in the near-field, which is confirmed through Mie scattering theory. Predictions from theoretical simulations examining the combined effects of near-field enhancement and interference are in good agreement with the experimental results. The results illustrate the versatility of the described technique for creating nano-cavity arrays or nano-pores in PEDOT-PSS over large areas with designed periodicity and hole size.