Jeffrey T. Culp

Metal-Organic Framework Thin Film Coated Optical Fiber Sensors: A Novel Waveguide-Based Chemical Sensing Platform

Integration of optical fiber with sensitive thin films offers great potential for the realization of novel chemical sensing platforms. In this study, we present a simple design strategy and high performance of nanoporous metal-organic framework (MOF) based optical gas sensors, which enables detection of a wide range of concentrations of small molecules based upon extremely small differences in refractive indices as a function of analyte adsorption within the MOF framework. Thin and compact MOF films can be uniformly formed and tightly bound on the surface of etched optical fiber through a simple solution method which is critical for manufacturability of MOF-based sensor devices. The resulting sensors show high sensitivity/selectivity to CO2 gas relative to other small gases (H2, N2, O2, and CO) with rapid (<tens of seconds) response time and excellent reversibility, which can be well correlated to the physisorption of gases into a nanoporous MOF. We propose a refractive index based sensing mechanism for the MOF-integrated optical fiber platform which results in an amplification of inherent optical absorption present within the MOF-based sensing layer with increasing values of effective refractive index associated with adsorption of gases.

Electronic structure, pore size distribution, and sorption characterization of an unusual MOF, {[Ni(dpbz)][Ni(CN)4]}n, dpbz = 1,4-bis(4-pyridyl)benzene

The monoclinic (Ni(L)[Ni(CN)4] (L= 1,4-Bis(4-pyridyl) benzene) compound (defined as Ni-dpbz) is a flexible metal organic framework which assumes a pillared structure with layers defined by 2D Ni[Ni(CN)4]n nets and dpbz ligands as pillars. The structure features an entrapped dpbz ligand that links between the open ends of four-fold Ni sites from two neighboring chains. This arrangement results in an unusual 5-fold pseudo square-pyramid environment for Ni and a significantly long Ni-N distance of 2.369(4) A. Using Density Functional Theory calculations, the different bonding characteristics between the 5-fold and 6-fold Nis were determined. We found that there is weak covalent bonding between the 5-fold Ni and N in the entrapped ligand, and the 6-fold Ni-N bonds provide effective electronic conduction. The disordered dimethyl sulfoxide (DMSO) solvent molecules are not bonded to the framework. The material has a single pore with a diameter of 4.1 A. This pore includes approximately 55% of the total free volume (based on a zero-diameter probe). The accessible pore surface area and pore volume were calculated to be 507 m2/g and 6.99 cm3/kg, respectively. The maximum amount of CO2 that can be accommodated in the pores after DMSO is removed was found to be 204 mg/g, agreeing with the results of adsorption/desorption experiments of about 220 mg/g.The monoclinic (Ni(L)[Ni(CN)4] (L= 1,4-Bis(4-pyridyl) benzene) compound (defined as Ni-dpbz) is a flexible metal organic framework which assumes a pillared structure with layers defined by 2D Ni[Ni(CN)4]n nets and dpbz ligands as pillars. The structure features an entrapped dpbz ligand that links between the open ends of four-fold Ni sites from two neighboring chains. This arrangement results in an unusual 5-fold pseudo square-pyramid environment for Ni and a significantly long Ni-N distance of 2.369(4) A. Using Density Functional Theory calculations, the different bonding characteristics between the 5-fold and 6-fold Nis were determined. We found that there is weak covalent bonding between the 5-fold Ni and N in the entrapped ligand, and the 6-fold Ni-N bonds provide effective electronic conduction. The disordered dimethyl sulfoxide (DMSO) solvent molecules are not bonded to the framework. The material has a single pore with a diameter of 4.1 A. This pore includes approximately 55% of the total free vol...

Simple Fabrication Method for Mixed Matrix Membranes with in Situ MOF Growth for Gas Separation

Metal organic framework (MOF)/polymer composite membranes are of interest for gas separations, as they often have performance that exceeds the neat polymer. However, traditional composite membranes, known as mixed matrix membranes (MMMs), can have complex and time-consuming preparation procedures. The MOF and polymer are traditionally prepared separately and require priming and mixing to ensure uniform distribution of particles and compatibility of the polymer-particle interface. In this study, we reduce the number of steps using an in situ MOF growth strategy. Herein, MMMs are prepared by growing MOF (UiO-66) in situ within a Matrimid polymer matrix while simultaneously curing the matrix. The gas separation performance for MMMs, prepared using this approach, was evaluated for the CO2/N2 separation and compared with MMMs made using the traditional postsynthesis mixing. It was found that MMMs prepared using both the in situ MOF growth strategy and by traditional postsynthesis mixing are equivalent in performance. However, using the in situ MOF growth allows for a simpler, faster, and potentially more economical fabrication alternative for MMMs.