Jennifer Fize

A Janus cobalt-based catalytic material for electro-splitting of water

The future of energy supply depends on innovative breakthroughs regarding the design of cheap, sustainable and efficient systems for the conversion and storage of renewable energy sources. The production of hydrogen through water splitting seems a promising and appealing solution. We found that a robust nanoparticulate electrocatalytic material, H(2)-CoCat, can be electrochemically prepared from cobalt salts in a phosphate buffer. This material consists of metallic cobalt coated with a cobalt-oxo/hydroxo-phosphate layer in contact with the electrolyte and mediates H(2) evolution from neutral aqueous buffer at modest overpotentials. Remarkably, it can be converted on anodic equilibration into the previously described amorphous cobalt oxide film (O(2)-CoCat or CoPi) catalysing O(2) evolution. The switch between the two catalytic forms is fully reversible and corresponds to a local interconversion between two morphologies and compositions at the surface of the electrode. After deposition, the noble-metal-free coating thus functions as a robust, bifunctional and switchable catalyst.

Copper molybdenum sulfide: a new efficient electrocatalyst for hydrogen production from water

A new inorganic solid state electrocatalyst for the hydrogen evolution reaction (HER) is reported. Highly crystalline layered ternary sulfide copper-molybdenum-sulfide (Cu2MoS4) was prepared by a simple precipitation method from CuI and [MoS4]2− precursors. In aqueous solution and over a wide pH range (pH 0 to 7), this Cu2MoS4 showed very good catalytic activity for HER with an overvoltage requirement of only ca. 135 mV and an apparent exchange current density of 0.040 mA cm−2 (Tafel slope of ca. 95 mV per decade was found irrespective of the pH value). This Cu2MoS4 catalyst was found to be stable during electrocatalytic hydrogen generation. Therefore, it represents an attractive alternative to platinum.

Novel cobalt/nickel–tungsten-sulfide catalysts for electrocatalytic hydrogen generation from water

The potential of water (photo)electrolysis technology to provide hydrogen as a fuel on a large scale depends on how viable electrocatalysts for the water oxidation reaction (WOR) and the hydrogen evolution reaction (HER) are and whether they can be constructed from elements which are abundant in the Earths crust. Here we show that ternary sulfides of cobalt–tungsten and nickel–tungsten (MWSx where M is Co or Ni) are efficient and robust electrocatalysts for the HER in water over a wide pH range. These novel ternary sulfides were readily grown on a conducting electrode surface by employing a scalable electrodeposition process from aqueous solutions of [M(WS4)2]2−. In terms of HER activity, the MWSx catalysts represent attractive alternatives to platinum. Moreover, we show that the HER activity is governed by the nature of the metal M within M–S–W heterobimetallic sulfide centres, located in the WS2-like layered structure of MWSx. Our work provides structural and mechanistic keys to understand how HER activity is promoted in previously described nickel and cobalt-doped molybdenum and tungsten sulfide materials.

Noncompetitive Fluorescence Polarization Aptamer-based Assay for Small Molecule Detection

In this paper, a new fluorescence polarization (FP) assay strategy is described reporting the first demonstration of a noncompetitive FP technique dedicated to the small molecule sensing. This approach was based on the unique induced-fit binding mechanism of nucleic acid aptamers which was exploited to convert the small target binding event into a detectable fluorescence anisotropy signal. An anti-L-tyrosinamide DNA aptamer, labeled by a single fluorescent dye at its extremity, was employed as a model functional nucleic acid probe. The DNA conformational change generated by the L-tyrosinamide binding was able to induce a significant increase in the fluorescence anisotropy signal. The method allowed enantioselective sensing of tyrosinamide and analysis in practical samples. The methodology was also applied to the L-argininamide detection, suggesting the potential generalizability of the direct FP-based strategy. Such aptamer-based assay appeared to be a sensitive analytical system of remarkable simplicity and ease of use.

Charge photo-accumulation and photocatalytic hydrogen evolution under visible light at an iridium(III)-photosensitized polyoxotungstate

Steady-state irradiation under visible light of a covalent Ir(III)-photosensitized polyoxotungstate is reported. In the presence of a sacrificial electron donor, the photolysis leads to the very efficient photoreduction of the polyoxometalate. Successive formation of the one-electron and two-electron reduced species, which are unambiguously identified by comparison with spectroelectrochemical measurements, is observed with a significantly faster rate reaction for the formation of the one-electron reduced species. The kinetics of the photoreduction, which are correlated to the reduction potentials of the polyoxometalate (POM), can be finely tuned by the presence of an acid. Indeed light-driven formation of the two-electron reduced POM is considerably facilitated in the presence of acetic acid. The system is also able to perform photocatalytic hydrogen production under visible light without significant loss of performance over more than 1 week of continuous photolysis and displays higher photocatalytic efficiency than the related multi-component system, outlining the decisive effect of the covalent bonding between the POM and the photosensitizer. This functional and modular system constitutes a promising step for the development of charge photoaccumulation devices and subsequent photoelectrocatalysts for artificial photosynthesis.

Mesoporous α-Fe2O3 thin films synthesized via the sol–gel process for light-driven water oxidation

This work reports a facile and cost-effective method for synthesizing photoactive α-Fe(2)O(3) films as well as their performances when used as photoanodes for water oxidation. Transparent α-Fe(2)O(3) mesoporous films were fabricated by template-directed sol-gel chemistry coupled with the dip-coating approach, followed by annealing at various temperatures from 350 °C to 750 °C in air. α-Fe(2)O(3) films were characterized by X-ray diffraction, XPS, FE-SEM and electrochemical measurements. The photoelectrochemical performance of α-Fe(2)O(3) photoanodes was characterized and optimized through the deposition of Co-based co-catalysts via different methods (impregnation, electro-deposition and photo-electro-deposition). Interestingly, the resulting hematite films heat-treated at relatively low temperature (500 °C), and therefore devoid of any extrinsic dopant, achieve light-driven water oxidation under near-to-neutral (pH = 8) aqueous conditions after decoration with a Co catalyst. The onset potential is 0.75 V vs. the reversible hydrogen electrode (RHE), thus corresponding to 450 mV light-induced underpotential, although modest photocurrent density values (40 μA cm(-2)) are obtained below 1.23 V vs. RHE. These new materials with a very large interfacial area in contact with the electrolyte and allowing for a high loading of water oxidation catalysts open new avenues for the optimization of photo-electrochemical water splitting.

Catalytic hydrogen production by a Ni–Ru mimic of NiFe hydrogenases involves a proton-coupled electron transfer step

A combined electrochemical and theoretical study suggests that hydrogen evolution from weak acids catalyzed by a structural mimic of the active site of NiFe hydrogenases [Ni(xbsms)Ru(C6Me6)Cl](+) proceeds through proton-coupled electron transfer steps.

Experimental and Theoretical Insight into Electrocatalytic Hydrogen Evolution with Nickel Bis(aryldithiolene) Complexes as Catalysts.

A series of neutral and monoanionic nickel dithiolene complexes with p-methoxyphenyl-substituted 1,2-dithiolene ligands have been prepared and characterized with physicochemical methods. Two of the complexes, the monoanion of the symmetric [Ni{S2C2(Ph-p-OCH3)2}2] (3(-)) with NBu4(+) as a counterion and the neutral asymmetric [Ni{S2C2(Ph)(Ph-p-OCH3)}2] (2), have been structurally characterized by single-crystal X-ray crystallography. All complexes have been employed as proton-reducing catalysts in N,N-dimethylformamide with trifluoroacetic acid as the proton source. The complexes are active catalysts with good faradaic yields, reaching 83% for 2 but relatively high overpotential requirements (0.91 and 1.55 V measured at the middle of the catalytic wave for two processes observed depending on the different routes of the mechanism). The similarity of the experimental data regardless of whether the neutral or anionic form of the complexes is used indicates that the neutral form acts as a precatalyst. On the basis of detailed density functional theory calculations, the proposed mechanism reveals two different main routes after protonation of the dianion of the catalyst in accordance with the experimental data, indicating the role of the concentration of the acid and the influence of the methoxy groups. Protonation at sulfur seems be more favorable than that at the metal, which is in marked contrast with the catalytic mechanism proposed for analogous cobalt dithiolene complexes.

Aqueous Photocurrent Measurements Correlated to Ultrafast Electron Transfer Dynamics at Ruthenium Tris Diimine Sensitized NiO Photocathodes

Understanding the structural and electronic factors governing the efficiency of dye-sensitized NiO photocathodes is essential to optimize solar fuel production in photoelectrochemical cells (PECs). For these purpose, three different ruthenium dyes, bearing either two or four methylphosphonate anchoring groups and either a bipyridine or a dipyridophenazine ancillary ligand, were synthesized and grafted onto NiO films. These photoelectrodes were fully characterized by XPS, ToF-SIMS, UV-vis absorption, time-resolved emission and femtosecond transient absorption spectroscopies. Increasing the number of anchoring groups from two to four proved beneficial for the grafting efficiency. No significant modification of the electronic properties compared to the parent photosensitizer was observed, in accordance with the non-conjugated nature of the grafted linker. The photoelectrochemical activity of the dye-sensitized NiO electrodes was assessed in fully aqueous medium in the presence of an irreversible electron acceptor and photocurrents reaching 190 μA.cm-2 were recorded. The transient absorption study revealed the presence of two charge recombination pathways for each of the sensitizers and evidenced a stabilized charge separated state in the dppz derivative, supporting its superior photoelectrochemical activity.

Enantioseparation by MEKC using a ligand exchange-based chiral pseudostationary phase

In this paper, a new ligand‐exchange ‐MEKC mode, based on the design of a unique lipohilic species (4′‐octadecylneamine derivative), which served both as micelle‐forming surfactant (by its hydrophobic part) and central ion‐complexing ligand (by its hydrophilic part) is described. The CMC of the used lipophilic neamine derivative was first determined by surface tension measurements. Subsequent NMR experiments were performed in order to investigate the Cu(II) binding properties of the neamine micellar phase. The enantioseparation properties of both the octadecylneamine derivative‐Cu(II) MEKC and the native neamine‐Cu(II) CE systems were evaluated and compared using the tryptophan racemate as a probe analyte. The effects of several different electrophoretic conditions on the enantiomer migration behavior in the ligand‐exchange‐MEKC mode were examined. The developed methodology was also applied to the enantioseparation of other analytes such as 1‐methyl‐tryptophan, 3,5‐diiodo‐tyrosine and 1‐naphtyl‐alanine.