Jenny Aveyard

One step visual detection of PCR products with gold nanoparticles and a nucleic acid lateral flow (NALF) device

Specific PCR products are detected with an antibody-free lateral-flow device by sandwiching them between reporter oligonucleotides covalently attached to gold nanoparticles (GNPs) and capture oligonucleotides covalently attached to a nitrocellulose chromatographic strip.

Gold and silver nanoparticles functionalized with known numbers of oligonucleotides per particle for DNA detection.

The biospecificity of gold and silver nanoparticles, functionalized with known numbers of oligonucleotides, is demonstrated in colorimetric microbead assays for complementary and mismatch sequences.

Improving the Sensitivity of Immunoassays by Tuning Gold Nanoparticles to the Tipping Point

Conventional lateral flow immunoassays are based on labeled antibodies. In this paper we describe an alternative design based on gold nanoparticles labeled with haptens. The haptens are conjugated to gold nanoparticles by a method that allows the number per particle to be tuned to the point of maximum sensitivity. This leads to improvements compared with conventional lateral flow devices without relinquishing any of their advantages. In parallel assays for the environmental pollutant 2,4-dinitrophenol the alternative devices were 50% more sensitive.

One molecule per particle method for functionalising nanoparticles

A mean of one biotinylated dextran molecule per particle is conjugated to 15 nm gold nanoparticles, by a process of self-assembly, which depends on the relationship between dextran molecular weight and particle size.

Actin Filament Motility Induced Variation of Resonance Frequency and Rigidity of Polymer Surfaces Studied by Quartz Crystal Microbalance

This contribution reports on the quantification of the parameters of the motility assays for actomyosin system using a quartz crystal microbalance (QCM). In particular, we report on the difference in the observed resonance frequency and dissipation of a quartz crystal when actin filaments are stationary as opposed to when they are motile. The changes in QCM measurements were studied for various polymer-coated surfaces functionalized with heavy meromyosin (HMM). The results of the QCM experiments show that the HMM-induced sliding velocity of actin filaments is modulated by a combination of the viscoelastic properties of the polymer layer including the HMM motors.

Nitric Oxide Releasing Polymeric Coatings for the Prevention of Biofilm Formation

The ability of nitric oxide (NO)-releasing polymer coatings to prevent biofilm formation is described. NO-releasing coatings on (poly(ethylene terephthalate) (PET) and silicone elastomer (SE)) were fabricated using aminosilane precursors. Pristine PET and SE were oxygen plasma treated, followed by immobilisation of two aminosilane molecules: N-(3-(trimethoxysilyl)propyl)diethylenetriamine (DET3) and N-(3-trimethoxysilyl)propyl)aniline (PTMSPA). N-diazeniumdiolate nitric oxide donors were formed at the secondary amine sites on the aminosilane molecules producing NO-releasing polymeric coatings. The NO payload and release were controlled by the aminosilane precursor, as DET3 has two secondary amine sites and PTMSPA only one. The antibacterial efficacy of these coatings was tested using a clinical isolate of Pseudomonas aeruginosa (PA14). All NO-releasing coatings in this study were shown to significantly reduce P. aeruginosa adhesion over 24 h with the efficacy being a function of the aminosilane modification and the underlying substrate. These NO-releasing polymers demonstrate the potential and utility of this facile coating technique for preventing biofilms for indwelling medical devices.

Linker-free covalent immobilization of nisin using atmospheric pressure plasma induced grafting

The linker-free covalent immobilization of polymers on surfaces has the potential to impart new properties and functions to surfaces for a wide range of applications. However, most current methods for the production of these surfaces involve multiple chemical steps and do not have a high degree of control over the chemical functionalities at the surface. A comprehensive study detailing the facile two-step covalent grafting of the antimicrobial peptide nisin onto polystyrene surfaces is reported. Functionalization is achieved using an atmospheric pressure plasma jet, and the reaction is monitored and compared with a standard wet chemical functionalization approach using a variety of analytical techniques. The reactive species produced by the atmospheric pressure plasma jet were analyzed by mass spectrometry and optical emission spectroscopy. The surface chemistry and topography of the functionalized surfaces were determined using contact angle measurements, Fourier infrared spectroscopy (FTIR), X-ray photoelectron spectroscopy and atomic force microscopy respectively. Following surface analysis, the antimicrobial efficacy of the covalently grafted nisin against two major food borne pathogens (Staphylococcus aureus and Listeria monocytogenes) was assessed at two different pHs. The results demonstrated that a post-plasma treatment step after nisin deposition is required to covalently graft the peptide onto the surface. The covalent immobilization of nisin resulted in a significant reduction in bacterial counts within a short 30 minutes contact time. These surfaces were also significantly more antimicrobial compared to those prepared via a more traditional wet chemical approach indicating that the reported method could be a less expensive and less time consuming alternative.

Surface-Controlled Properties of Myosin Studied by Electric Field Modulation

The efficiency of dynamic nanodevices using surface-immobilized protein molecular motors, which have been proposed for diagnostics, drug discovery, and biocomputation, critically depends on the ability to precisely control the motion of motor-propelled, individual cytoskeletal filaments transporting cargo to designated locations. The efficiency of these devices also critically depends on the proper function of the propelling motors, which is controlled by their interaction with the surfaces they are immobilized on. Here we use a microfluidic device to study how the motion of the motile elements, i.e., actin filaments propelled by heavy mero-myosin (HMM) motor fragments immobilized on various surfaces, is altered by the application of electrical loads generated by an external electric field with strengths ranging from 0 to 8 kVm(-1). Because the motility is intimately linked to the function of surface-immobilized motors, the study also showed how the adsorption properties of HMM on various surfaces, such as nitrocellulose (NC), trimethylclorosilane (TMCS), poly(methyl methacrylate) (PMMA), poly(tert-butyl methacrylate) (PtBMA), and poly(butyl methacrylate) (PBMA), can be characterized using an external field. It was found that at an electric field of 5 kVm(-1) the force exerted on the filaments is sufficient to overcome the frictionlike resistive force of the inactive motors. It was also found that the effect of assisting electric fields on the relative increase in the sliding velocity was markedly higher for the TMCS-derivatized surface than for all other polymer-based surfaces. An explanation of this behavior, based on the molecular rigidity of the TMCS-on-glass surfaces as opposed to the flexibility of the polymer-based ones, is considered. To this end, the proposed microfluidic device could be used to select appropriate surfaces for future lab-on-a-chip applications as illustrated here for the almost ideal TMCS surface. Furthermore, the proposed methodology can be used to gain fundamental insights into the functioning of protein molecular motors, such as the force exerted by the motors under different operational conditions.

Modified Mesoporous Silica Nanoparticles with a Dual Synergetic Antibacterial Effect

Application of mesoporous silica nanoparticles (MSNs) as antifouling/antibacterial carriers is limited and specifically with a dual synergetic effect. In the present work, MSNs modified with quaternary ammonium salts (QASs) and loaded with the biocide Parmetol S15 were synthesized as functional fillers for antifouling/antibacterial coatings. From the family of the MSNs, MCM-48 was selected as a carrier because of its cubic pore structure, high surface area, and high specific pore volume. The QASs used for the surface modification of MCM-48 were dimethyloctadecyl[3-(trimethoxysilyl)propyl]ammonium chloride and dimethyltetradecyl[3-(triethoxysilyl)propyl]ammonium chloride. The QAS-modified MCM-48 reveals strong covalent bonds between the QAS and the surface of the nanoparticles. The surface functionalization was confirmed by Fourier transform infrared spectroscopy, thermogravimetric analysis, elemental analysis, and ζ-potential measurements. Additional loading of the QAS-modified MCM-48 with a commercially available biocide (Parmetol S15) resulted in a synergetic dual antibacterial/antifouling effect. Either loaded or unloaded QAS-modified MSNs exhibited high antibacterial performance confirming their dual activity. The QAS-modified MCM-48 loaded with the biocide Parmetol S15 killed all exposed bacteria after 3 h of incubation and presented 100% reduction at the antibacterial tests against Gram-negative and Gram-positive bacteria. Furthermore, the QAS-modified MCM-48 without Parmetol S15 presented 77-89% reduction against the exposed Gram-negative bacteria and 78-94% reduction against the exposed Gram-positive bacteria. In addition, the modified MCM-48 was mixed with coating formulations, and its antifouling performance was assessed in a field test trial in northern Red Sea. All synthesized paints presented significant antifouling properties after 5 months of exposure in real seawater conditions, and the dual antifouling effect of the nanoparticles was confirmed.

Electric field modulation of the motility of actin filaments on myosin-functionalised surfaces.

We investigated the difference in electrically guided acto-myosin motility on two surfaces. Rabbit skeletal muscle heavy meromyosin (HMM) was absorbed onto surfaces coated with Nitrocellulose (NC) and Poly(butyl methacrylate) (PBMA). A modified in vitro motility assay with sealed chambers for the insertion of electrodes allowed an electrical field to be applied across the flow cell. On all surfaces a small increase in velocity and general guidance of the actin filaments towards the positive electrode is seen at field strengths in the range of ~3000 – 4000Vm-1. A large increase in velocity was observed at ~5000Vm-1 and a significant change in the velocity of the actin filaments present in field strengths higher than this. NC supported the highest percentage of motile filaments and at a field of 8000Vm-1 reached ~66%. PBMA however supported the least percentage of motile filaments and irregular motility was observed even at higher fields where guidance was expected to be strong. The change in velocity in the range of fields tested varied significantly on the surfaces with NC displaying a 46% increase from 0 to 8000Vm-1 whereas on PBMA this value was just 37%.