Jens Wahlström

Prevalence of self-reported neck-shoulder-arm pain and concurrent low back pain or psychological distress: time-trends in a general population, 1990-2006.

Study Design. Analysis of repeated cross-sectional surveys. Objective. To investigate the prevalence of neck-shoulder-arm pain and concurrent low back pain and psychological distress in a geographical area over a 16-year period. Summary of Background Data. A large number of studies have shown that nonspecific neck, shoulder, and arm pain is a very common symptom in the general population. However, few studies have followed the prevalence of neck-shoulder-arm pain within a geographical area, in order to investigate time-trends. Methods. This study provides an analysis of questionnaire data collected every 4 years between 1990 and 2006 on the prevalence of neck-shoulder-arm pain and concurrent low back pain or psychological distress in the County of Stockholm, Sweden (response rate: 61%–69%). All individuals aged 21 to 64 years (n = 1976–26,611) were included in the study. Results. Over the 16-year period, the prevalence of self-reported neck-shoulder-arm pain rose slightly, from 22.8% to 25.0% among females (prevalence rate ratio [PRR]: 1.10) and from 12.8% to 15.4% among males (PRR: 1.21). The prevalence of neck-shoulder-arm pain with concurrent low back pain also rose slightly, from 8.4% to 10.8% among females (PRR: 1.28) and from 5.3% to 6.6% among males (PRR: 1.24). In contrast, the prevalence of neck-shoulder-arm pain with concurrent psychological distress rose more substantially, from 4.4% to 8.5% among females (PRR: 1.91) and from 2.0% to 4.3% among males (PRR: 2.18). All prevalence rates rose between 1990 and 2002, and decreased in 2006 compared to 2002. The gender gap in prevalence did not change over time. Conclusion. Although the prevalence of neck-shoulder-arm pain and concurrent symptoms decreased in 2006 compared to 2002, it is still too early to conclude that we have reached and passed the peak of the “epidemic” of neck-shoulder-arm pain.

Cost-efficient measurement strategies for posture observations based on video recordings

Assessment of working postures by observation is a common practice in ergonomics. The present study investigated whether monetary resources invested in a video-based posture observation study should preferably be spent in collecting many video recordings of the work and have them observed once by one observer, or in having multiple observers rate postures repeatedly from fewer videos. The study addressed this question from a practitioners perspective by focusing two plausible scenarios: documenting the mean exposure of one individual, and of a specific occupational group. Using a data set of observed working postures among hairdressers, empirical values of posture variability, observer variability, and costs for recording and observing one video were entered into equations expressing the total cost of data collection and the information (defined as 1/SD) provided by the resulting estimates of two variables: percentage time with the arm elevated <15° and >90°. Sixteen measurement strategies involving 1-4 observers repeating their posture ratings 1-4 times were examined for budgets up to €2000. For both posture variables and in both the individual and group scenario, the most cost-efficient strategy at any specific budget was to engage 3-4 observers and/or having observer(s) rate postures multiple times each. Between 17% and 34% less information was produced when using the commonly practiced approach of having one observer rate a number of video recordings one time each. We therefore recommend observational posture assessment to be based on video recordings of work, since this allows for multiple observations; and to allocate monetary resources to repeated observations rather than many video recordings.

Data collection costs in industrial environments for three occupational posture exposure assessment methods

BackgroundDocumentation of posture measurement costs is rare and cost models that do exist are generally naïve. This paper provides a comprehensive cost model for biomechanical exposure assessment in occupational studies, documents the monetary costs of three exposure assessment methods for different stakeholders in data collection, and uses simulations to evaluate the relative importance of cost components.MethodsTrunk and shoulder posture variables were assessed for 27 aircraft baggage handlers for 3 full shifts each using three methods typical to ergonomic studies: self-report via questionnaire, observation via video film, and full-shift inclinometer registration. The cost model accounted for expenses related to meetings to plan the study, administration, recruitment, equipment, training of data collectors, travel, and onsite data collection. Sensitivity analyses were conducted using simulated study parameters and cost components to investigate the impact on total study cost.ResultsInclinometry was the most expensive method (with a total study cost of € 66,657), followed by observation (€ 55,369) and then self report (€ 36,865). The majority of costs (90%) were borne by researchers. Study design parameters such as sample size, measurement scheduling and spacing, concurrent measurements, location and travel, and equipment acquisition were shown to have wide-ranging impacts on costs.ConclusionsThis study provided a general cost modeling approach that can facilitate decision making and planning of data collection in future studies, as well as investigation into cost efficiency and cost efficient study design. Empirical cost data from a large field study demonstrated the usefulness of the proposed models.

Perceived exertion, comfort and working technique in professional computer users and associations with the incidence of neck and upper extremity symptoms

BackgroundThe aim of this study was to investigate whether perceived exertion, perceived comfort and working technique is associated with the incidence of neck and upper extremity symptoms among professional computer users.MethodsAt baseline a self-administered questionnaire was distributed to 853 participants from 46 different work sites (382 men and 471 women) who, at baseline, had been free from neck and upper extremity symptoms during the preceding month. Work-related exposures, individual factors, and symptoms from the neck and upper extremities were assessed. Observations of working technique were performed by ergonomists using an ergonomic checklist. Incidence data were collected by means of 10 monthly questionnaires, asking for information on the occurrence of neck, shoulder and arm/hand symptoms. Perceived exertion was rated on a modified Borg RPE scale ranging from 0 (very, very light) to 14 (very, very strenuous). Perceived comfort was rated on a 9-point scale ranging from -4 (very, very poor) to +4 (very, very good) in relation to the chair, computer screen, keyboard, and computer mouse.ResultsThe median follow up time was 10.3 months. The incidence of symptoms from the neck, shoulders and arm/hands were 50, 24 and 34 cases per 100 person years, respectively.Higher perceived exertion in the neck, shoulder or arm/hands was associated with an increased risk of developing symptoms in the corresponding body region. Moreover, a dose-response relationship between the level of exertion and the risk of developing symptoms was recorded for all three regions. There was an association between low comfort and an increased risk for neck symptoms, but not for shoulder and arm/hand symptoms, although a trend towards such an association (not statistically significant) could be seen. Working technique was, in this study, not associated with the risk of developing symptoms in any of the investigated body regions.ConclusionThere was a strong association between high perceived exertion and the development of neck, shoulder, and arm/hand symptoms. Moreover, there was an association between poor perceived comfort and neck pain. Surveillance of computer users may include perceived exertion and comfort to target individuals at risk for neck and upper extremity symptoms.

The effect of flooring on musculoskeletal symptoms in the lower extremities and low back among female nursing assistants

This study examines the effect of changing the floor from a 2-mm homogenous vinyl floor to a 4-mm heterogeneous vinyl floor (1.5-mm wear layer and 2.5-mm foam layer) on musculoskeletal symptoms in the lower extremities and low back among nursing assistants in a geriatric care centre. A pre-post design with a reference group consisting of nursing assistants from a similar geriatric care centre was used. Follow-up measurements were carried out 12 and 24 months after the intervention by means of questionnaires. At the 1-year follow-up, the pain intensity score in the feet of the intervention group had decreased compared with the baseline value and remained statistically significant at the 2-year follow-up. The decrease in pain intensity score of the feet in the intervention group was statistically significantly different from the reference group, both after 1 and 2 years. Practitioner Summary: The results show the importance of flooring in the workplace with regard to reducing musculoskeletal symptoms. Appropriate flooring is especially important in the female-dominated health care sector, where workers must stand or walk for long periods.

Data processing costs for three posture assessment methods

BackgroundData processing contributes a non-trivial proportion to total research costs, but documentation of these costs is rare. This paper employed a priori cost tracking for three posture assessment methods (self-report, observation of video, and inclinometry), developed a model describing the fixed and variable cost components, and simulated additional study scenarios to demonstrate the utility of the model.MethodsTrunk and shoulder postures of aircraft baggage handlers were assessed for 80 working days using all three methods. A model was developed to estimate data processing phase costs, including fixed and variable components related to study planning and administration, custom software development, training of analysts, and processing time.ResultsObservation of video was the most costly data processing method with total cost of € 30,630, and was 1.2-fold more costly than inclinometry (€ 26,255), and 2.5-fold more costly than self-reported data (€ 12,491). Simulated scenarios showed altering design strategy could substantially impact processing costs. This was shown for both fixed parameters, such as software development and training costs, and variable parameters, such as the number of work-shift files processed, as well as the sampling frequency for video observation. When data collection and data processing costs were combined, the cost difference between video and inclinometer methods was reduced to 7%; simulated data showed this difference could be diminished and, even, reversed at larger study sample sizes. Self-report remained substantially less costly under all design strategies, but produced alternate exposure metrics.ConclusionsThese findings build on the previously published data collection phase cost model by reporting costs for post-collection data processing of the same data set. Together, these models permit empirically based study planning and identification of cost-efficient study designs.

A Follow-up Study of Welders' Exposure to Vibration in a Heavy Engineering Production Workshop

Manual work involving vibrating power tools is associated with symptoms that include vascular, neurological and musculoskeletal disorders. This study examines the vibration exposure of welders to determine the change between 1987 and 2008. Vibration measurements on handheld tools were used to evaluate the acceleration and the daily exposure time was determined by subjective rating. From these data, the 8-hour equivalent vibration exposure A(8), has been calculated. During the period, the A(8) decreased from 3.9 m/s2 to 1.9 m/s2. It was concluded that this decrease is the result of fewer vibrating tools and a decrease in daily exposure time. Although the daily vibration exposure has decreased over the study time, for some welders the daily vibration exposure A(8) is still above the action value set by the EU directive on vibration. This means more effort should be spent to decrease vibration exposure.

Cost-efficient observation of working postures from video recordings – more videos, more observers or more views per observer?

In ergonomics, assessing the working postures of an individual by observation is a very common practice. The present study investigated whether monetary resources devoted to an observational study should preferably be invested in collecting many video recordings of the work, or in having several observers estimate postures from available videos multiple times. On the basis of a data set of observed working postures among hairdressers, necessary information in terms of posture variability, observer variability, and costs for recording and observing videos was entered into equations providing the total cost of data collection and the precision (informative value) of the resulting estimates of two variables: percentages time with the arm elevated <15 degrees and >90 degrees. In all 160 data collection strategies, differing with respect to the number of video recordings and the number of repeated observations of each recording, were simulated and compared for cost and precision. For both posture variables, the most cost-efficient strategy for a given budget was to engage 4 observers to look at available video recordings, rather than to have one observer look at more recordings. Since the latter strategy is the more common in ergonomics practice, we recommend reconsidering standard practice in observational posture assessment.

Full-Shift Trunk and Upper Arm Postures and Movements Among Aircraft Baggage Handlers

OBJECTIVES The present study assessed full-shift trunk and upper arm postural exposure amplitudes, frequencies, and durations among Swedish airport baggage handlers and aimed to determine whether exposures differ between workers at the ramp (loading and unloading aircraft) and baggage sorting areas. METHODS Trunk and upper arm postures were measured using inclinometers during three full work shifts on each of 27 male baggage handlers working at a large Swedish airport. Sixteen of the baggage handlers worked on the ramp and 11 in the sorting area. Variables summarizing postures and movements were calculated, and mean values and variance components between subjects and within subject (between days) were estimated using restricted maximum likelihood algorithms in a one-way random effect model. RESULTS In total, data from 79 full shifts (651h) were collected with a mean recording time of 495min per shift (range 319-632). On average, baggage handlers worked with the right and left arm elevated >60° for 6.4% and 6.3% of the total workday, respectively. The 90th percentile trunk forward projection (FP) was 34.1°, and the 50th percentile trunk movement velocity was 8° s(-1). For most trunk (FP) and upper arm exposure variables, between-subject variability was considerable, suggesting that the flight baggage handlers were not a homogeneously exposed group. A notable between-days variability pointed to the contents of the job differing on different days. Peak exposures (>90°) were higher for ramp workers than for sorting area workers (trunk 0.6% ramp versus 0.3% sorting; right arm 1.3% ramp versus 0.7% sorting). CONCLUSIONS Trunk and upper arm postures and movements among flight baggage handlers measured by inclinometry were similar to those found in other jobs comprising manual material handling, known to be associated with increased risks for musculoskeletal disorders. The results showed that full-shift trunk (FP) and, to some extent, peak arm exposures were higher for ramp workers compared with sorting workers.

Neurosensory sequelae assessed by thermal and vibrotactile perception thresholds after local cold injury

Background Local freezing cold injuries are common in the north and sequelae to cold injury can persist many years. Quantitative sensory testing (QST) can be used to assess neurosensory symptoms but has previously not been used on cold injury patients. Objective To evaluate neurosensory sequelae after local freezing cold injury by thermal and vibrotactile perception thresholds and by symptom descriptions. Design Fifteen patients with a local freezing cold injury in the hands or feet, acquired during military training, were studied with QST by assessment of vibrotactile (VPT), warmth (WPT) and cold (CPT) perception thresholds 4 months post-injury. In addition, a follow-up questionnaire, focusing on neurovascular symptoms, was completed 4 months and 4 years post-injury. Results QST demonstrated abnormal findings in one or both affected hands for VPT in 6 patients, for WPT in 4 patients and for CPT in 1 patient. In the feet, QST was abnormal for VPT in one or both affected feet in 8 patients, for WPT in 6 patients and for CPT in 4 patients. Freezing cold injury related symptoms, e.g. pain/discomfort when exposed to cold, cold sensation and white fingers were common at 4 months and persisted 4 years after the initial injury. Conclusions Neurosensory sequelae after local freezing cold injury, in terms of abnormal thermal and/or vibration perception thresholds, may last at least 4 months after the initial injury. Symptoms such as pain/discomfort at cold exposure, cold sensations and white fingers may persist at least 4 years after the initial injury.