Jeong-Heui Lee

PCR Marker-Based Evaluation of the Eating Quality of Japonica Rice (Oryza sativa L.)

Evaluation of eating quality in early breeding generations of rice is critical to developing varieties with better palatability. This paper reports DNA markers associated with eating quality of temperate japonica rice and an evaluation method aided by multiple regression analysis. A total of 30 markers comprising STSs, SNPs, and SSRs were tested for their association with palatability using 22 temperate japonica varieties with different palatability values. Eating quality-related traits of the 22 varieties were also measured. Of the 30 markers, 18 were found to be significantly associated with palatability and, consequently, a model regression equation with an R2 value of 0.99 was formulated to estimate the palatability by the marker data set. Validation of the model equation using selected breeding lines indicated that the marker set and the equation are highly applicable to evaluation of the palatability of cooked rice in temperate japonica varieties.

Identification of Quantitative Trait Loci Associated with Rice Eating Quality Traits Using a Population of Recombinant Inbred Lines Derived from a Cross between Two Temperate japonica Cultivars

Improved eating quality is a major breeding target in japonica rice due to market demand. In this study, we performed genetic analysis to identify quantitative trait loci (QTLs) that control rice eating quality traits using 192 recombinant inbred lines (RILs) derived from a cross between two japonica cultivars, ‘Suweon365’ and ‘Chucheongbyeo’. We evaluated the stickiness (ST) and overall evaluation (OE) of cooked rice using a sensory test, the glossiness of cooked rice (GCR) using a Toyo-taste meter, and measured the amylose content (AC), protein content (PC), alkali digestion value (ADV), and days to heading (DH) of the RILs in the years 2006 and 2007. Our analysis revealed 21 QTLs on chromosomes 1, 4, 6, 7, 8, and 11. QTLs on chromosomes 6, 7, and 8 were detected for three traits related to eating quality in both years. QTLs for ST and OE were identified by a sensory test in the same region of the QTLs for AC, PC, ADV, GCR and DH on chromosome 8. QTL effects on the GCR were verified using QTL-NILs (near-isogenic lines) of BC3F4–6 in the Suweon365 background, a low eating quality variety, and some BC1F3 lines. Chucheongbyeo alleles at QTLs on chromosomes 7 and 8 increased the GCR in the NILs and backcrossed lines. The QTLs identified by our analysis will be applicable to future marker-assisted selection (MAS) strategies for improving the eating quality of japonica rice.

Changes in Quality Properties of Brown Rice after Germination

The objective of this study was to evaluate quality properties, including amylose, alkali digestion value (ADV), and amylogram, of brown rice and germinated brown rice of some cultivars in Korea for rice processing products. The protein content of brown rice was significantly higher than those of germinated brown rice. The amylose content of the samples ranged from 17.09 to 18.85%. Alkali digestion value (ADV) of brown rice and germinated brown rice were described as a grade of 2-5 and 4-7, respectively. In a rapid visco analyzer (RVA) examination, pasting temperature of brown rice and germinated brown rice was 67.93-68.05℃. In addition, the pasting characteristics of brown rice were significantly higher than those of germinated brown rice. A texture analysis test showed that germinated brown rice Haiami had the lowest hardness and germinated brown rice Samkwang had the highest adhesiveness.

QTL Detection Associated with Eating Quality Based on Palatability Test in Japonica Rice (Oryza sativa L.)

A recombinant inbred line (RIL) population derived from the cross between Ilpumbyeo (a Japonica of high eating quality) and Moroberekan (a tropical Japonica type of low eating quality) was used for mapping QTLs associated with grain physicochemical properties and eating quality traits in rice. A total of 182 recombinant inbred lines were evaluated for two physicochemical traits, alkali digestive value and amylose content, and five traits associated with eating quality including glossiness of cooked rice determined by Toyo-taste meter, and glossiness, stickiness, hardness and overall evaluation for taste evaluation by panels. A total of 30 QTLs associated with seven traits in 10 loci on chromosomes 1, 3, 5, 6, 10, and 12 were identified. The most critical regions for eating quality were on chromosomes 3, 5 and 6 by Ilpumbyeo alleles, whereas Moroberekan contributed a total of 6 loci on chromosomes 1, 10 and 12. The QTL region on chromosome 5 contains the novel alleles for eating quality from Ilpumbyeo. MAS using DNA markers tightly linked with those QTLs will be useful for breeding Japonica cultivars with high eating quality.

Morphological and starch characteristics of the Japonica rice mutant variety Seolgaeng for dry-milled flour

Producing good-quality, fine rice flour is more difficult than wheat flour because the rice grain is harder. The non-glutinous Japonica-type variety Seolgaeng, derived from N-methyl-N-nitrosourea (MNU) mutagenesis, and four other varieties, representing a range of amylose contents, were evaluated in this study. Dry-milled Seolgaeng rice flour exhibited an average particle size that is <70 μm, a more uniform particle-size proportion than other varieties. Moreover, we noted significant differences in the damaged starch content in flour from Seolgaeng compared to the other varieties (p<0.05). Seolgaeng flour showed a round starch structure, which would lead to better friability, finer particle size, and less damage to the endosperm during dry milling. Indeed, among all varieties evaluated in this study, dry-milled Seolgaeng flour had the finest particle size (averaging <70 μm) and exhibited less damaged starch. With its round starch granules, Seolgaeng is a suitable candidate for drymilled rice flour.

Content and characteristics of resistant starch in high amylose mutant rice varieties derived from Ilpum.

This study was conducted to analyze the starch characteristics of three rice cultivars, Goami 2, Goami 3 and Goami 4 with high amylose content and resistant starch. These rice varieties were developed by mutation breeding based on N-methylN-nitrosourea (MNU) treatment in a japonica variety, Ilpum. Resistant starch contents of three high amylose mutant rice varieties and Ilpum were 11.87~13.69% and 0.36%, respectively. The X-ray diffraction patterns of starches of three varieties, Goami 2, Goami 3 and Goami 4 displayed B-type pattern. The proportion of amylopectin short chains of 6 to 12 in DP of the high amylose mutant rice varieties was significantly lower than that of Ilpum. Resistant starch contents had positive correlation with the amylose content, total dietary fiber content, medium length chains of 13 to 24, long chains of ≥ 25 in DP of amylopectin, pasting temperature and setback viscosity.

Comparative Analysis on Quality and Bread-making Properties by Particle Size of Dry-Milled Rice Flours of Rice Varieties

This study was conducted the comparative analysis on quality and rice bread process suitability properties by four particle size classification of dry-milled flours for four rice varieties. Dry-milled rice flours were prepared by dry milling and classified according to particle size using 100, 150, 200, and 250 mesh sieves. The mean particle size by four particle size classification of 60 ~ 100 mesh, 100 ~ 150 mesh, 150 ~ 200 mesh, 200 ~ 250 mesh exhibited 118.9 μm, 87.4 μm, 65.3 μm, 46.1 μm, respectively. The particle size of dry-milled rice flours was the finer, the damaged starch content was the higher (r = − 0.570*). The particle size also had significant negative correlation with the water absorption index (r = − 0.533*, r = − 0.593*), and water solubility index (r = − 0.857**, r = − 0.584*). Dry-milled rice flours with particle size of 60 ~ 70 μm, passed through 150 and 200 mesh sieves exhibited the highest specific volume of rice bread. Whereas, the dry-milled rice flour with finer particle size above 200 mesh showed the lowest specific volume of rice bread. These results will be applied as a quality standard to aid in the selection of the most suitable dry-milled rice flour for baking.

Quality Properties of Makgeolli Brewed with Fiber-rich Rice Cultivars

Goami2, Goami3 and Goami4 were identified as fiber-rich rice cultivars which were developed by mutation breeding with Ilpum. The purpose of this study was to develop a method for producing Makgeolli with the fiber-rich rice cultivars, Goami2, Goami3, Goami4, and to investigate the characteristics of Makgeolli during the fermentation process. Makgeolli was produced herein by fermentation steamed rice (SR), raw rice flour (RF), and steamed rice flour (SF) from Goami2, Goami3, Goami4, Ilpum and Sealgaeng rice cultivars. The physicochemical characteristics including alcohol and sugar content, pH, total acidity, TDF (total dietary fiber), and color of the Makgeolli samples were analyzed. Makgeolli produced with Ilpum and Sealgaeng showed satisfactory fermention characteristics in alcohol and sugar content when SR, RF and SF were used. In the case of Goami2, Goami3, and Goami4, the use of SF resulted in 17.2~20.1% alcohol content, whereas only 10% alcohol was produced by SR. The sugar contents in the SF-makgeolli samples were also higher (9~10 °Brix) than in the SR-makgeolli (5.35~5.44 °Brix) for Goami2 and Goami4 cultivars. The dietary fiber contents of the Makgeolli samples produced using SF from the fiber-rich rice cultivars were higher (1.35~1.52 g/100 mL) than those produced with Ilpum and Sealgaeng (0.74~0.87 g/100 mL). From these results, it may be suggested that SF would be an appropriate material to brew Makgeolli using fiber-rich rice cultivars to obtain better physicochemical and functional qualities.

Lodging and Pre-harvest Sprouting Tolerant, High Quality and Suitable for Processing Cooked Rice ‘Jungmo1017’

The ‘Jungmo1017’ is a japonica rice variety developed from a cross between Suweon462 which has a good plant architecture, cold tolerance, moderately tolerant to leaf blast and bacterial blight and medium maturing habit, and Yeongdeog34 which has translucent milled rice and good milling properties, by the rice breeding team at NICS, RDA in 2011. The heading date of ‘Jungmo1017’ is August 16 and it is six days later than ‘Hwaseong’. ‘Jungmo1017’ has 65 cm of culm length which is 18 cm shorter than those of ‘Hwaseong’ and 93 spikelet per panicle. The pre-harvest sprouting rate of ‘Jungmo1017’ is 8.6% that is lower than 27.7% of ‘Hwaseong’ on local adaptability test (LAT). It showed resistance to blast diseases and moderately resistant to bacterial blight (K1 race) and stripe virus, but susceptible to other races (K2, K3 and K3a) of bacterial blight, viruses and planthoppers. The milled rice of this variety exhibits translucent, clear non-glutinous endosperm and medium short grain shape. It has better palatability index of cooked rice (0.53) than that of ‘Hwaseong’. ‘Jungmo1017’ showed lower protein content (6.4%) and amylose content (18.0%). ‘Jungmo1017’ could use aseptic-packaged cooked rice or processing cooked rice because its hardness of cooked rice is soft, setback and balance is low and palatability of cold and aseptic rice showed high score. The characters related to milling is better than those of ‘Hwaseong’. ‘Jungmo1017’ showed 5.01 MT/ha of milled rice productivity at 7 sites of middle plain, southern mid-mountainous and south-east coastal area in ordinary cultivation. ‘Jungmo1017’ could be adaptable to the middle plain area in Korea.