Jeremiah T. Easley

Microsphere-based gradient implants for osteochondral regeneration: a long-term study in sheep

BACKGROUND The microfracture technique for cartilage repair has limited ability to regenerate hyaline cartilage. AIM The current study made a direct comparison between microfracture and an osteochondral approach with microsphere-based gradient plugs. MATERIALS & METHODS The PLGA-based scaffolds had opposing gradients of chondroitin sulfate and β-tricalcium phosphate. A 1-year repair study in sheep was conducted. RESULTS The repair tissues in the microfracture were mostly fibrous and had scattered fissures with degenerative changes. Cartilage regenerated with the gradient plugs had equal or superior mechanical properties; had lacunated cells and stable matrix as in hyaline cartilage. CONCLUSION This first report of gradient scaffolds in a long-term, large animal, osteochondral defect demonstrated potential for equal or better cartilage repair than microfracture.

Combination Pod-Intravaginal Ring Delivers Antiretroviral Agents for HIV Prophylaxis: Pharmacokinetic Evaluation in an Ovine Model

ABSTRACT Preexposure prophylaxis (PrEP) against HIV using oral regimens based on the nucleoside reverse transcriptase inhibitor tenofovir disoproxil fumarate (TDF) has been effective to various degrees in multiple clinical trials, and the CCR5 receptor antagonist maraviroc (MVC) holds potential for complementary efficacy. The effectiveness of HIV PrEP is highly dependent on adherence. Incorporation of the TDF-MVC combination into intravaginal rings (IVRs) for sustained mucosal delivery could increase product adherence and efficacy compared with oral and vaginal gel formulations. A novel pod-IVR technology capable of delivering multiple drugs is described. The pharmacokinetics and preliminary local safety characteristics of a novel pod-IVR delivering a combination of TDF and MVC were evaluated in the ovine model. The device exhibited sustained release at controlled rates over the 28-day study and maintained steady-state drug levels in cervicovaginal fluids (CVFs). Dilution of CVFs during lavage sample collection was measured by ion chromatography using an inert tracer, allowing corrected drug concentrations to be measured for the first time. Median, steady-state drug levels in vaginal tissue homogenate were as follows: for tenofovir (TFV; in vivo hydrolysis product of TDF), 7.3 × 102 ng g−1 (interquartile range [IQR], 3.0 × 102, 4.0 × 103); for TFV diphosphate (TFV-DP; active metabolite of TFV), 1.8 × 104 fmol g−1 (IQR, 1.5 × 104, 4.8 × 104); and for MVC, 8.2 × 102 ng g−1 (IQR, 4.7 × 102, 2.0 × 103). No adverse events were observed. These findings, together with previous pod-IVR studies, have allowed several lead candidates to advance into clinical evaluation.

Implantable microelectromechanical sensors for diagnostic monitoring and post-surgical prediction of bone fracture healing.

The relationship between modern clinical diagnostic data, such as from radiographs or computed tomography, and the temporal biomechanical integrity of bone fracture healing has not been well‐established. A diagnostic tool that could quantitatively describe the biomechanical stability of the fracture site in order to predict the course of healing would represent a paradigm shift in the way fracture healing is evaluated. This paper describes the development and evaluation of a wireless, biocompatible, implantable, microelectromechanical system (bioMEMS) sensor, and its implementation in a large animal (ovine) model, that utilized both normal and delayed healing variants. The in vivo data indicated that the bioMEMS sensor was capable of detecting statistically significant differences (p‐value <0.04) between the two fracture healing groups as early as 21 days post‐fracture. In addition, post‐sacrifice micro‐computed tomography, and histology data demonstrated that the two model variants represented significantly different fracture healing outcomes, providing explicit supporting evidence that the sensor has the ability to predict differential healing cascades. These data verify that the bioMEMS sensor can be used as a diagnostic tool for detecting the in vivo course of fracture healing in the acute post‐treatment period.

Alterations in trabecular bone microarchitecture in the ovine spine and distal femur following ovariectomy

Osteoporosis is a bone disease resulting in increased fracture risk as a result of alterations in both quantity and quality of bone. Bone quality is a combination of metabolic and microarchitectural properties of bone that can help to explain the increased susceptibility to fracture. Translational animal models are essential to understanding the pathology and for evaluating potential treatments of this disease. Large animals, such as the ovariectomized sheep, have been used as models for post-menopausal osteoporosis. However, long-term studies have not been carried out to observe the effects of ovariectomy after more than one year. This study employed micro-computed tomography to quantify changes in microarchitectural and mechanical parameters in femoral condyles and vertebral bodies of sheep that were sacrificed one or two years following ovariectomy. In the vertebral body, microarchitectural characteristics were significantly degraded following one year of ovariectomy in comparison to controls. The mechanical anisotropy, determined from micro-scale finite element models, was also greater in the ovariectomized groups, although the fabric tensor anisotropy was similar. There was no greater architectural degradation following two years of ovariectomy compared to one. Ovariectomy had minimal effects on the trabecular architecture of the distal femur even after two years. These results indicate that the vertebral body is the preferred anatomic site for studying bone from the ovariectomized sheep model, and that architectural changes stabilize after the first year.

Partial gravity unloading inhibits bone healing responses in a large animal model

The reduction in mechanical loading associated with space travel results in dramatic decreases in the bone mineral density (BMD) and mechanical strength of skeletal tissue resulting in increased fracture risk during spaceflight missions. Previous rodent studies have highlighted distinct bone healing differences in animals in gravitational environments versus those during spaceflight. While these data have demonstrated that microgravity has deleterious effects on fracture healing, the direct translation of these results to human skeletal repair remains problematic due to substantial differences between rodent and human bone. Thus, the objective of this study was to investigate the effects of partial gravitational unloading on long-bone fracture healing in a previously-developed large animal Haversian bone model. In vivo measurements demonstrated significantly higher orthopedic plate strains (i.e. load burden) in the Partial Unloading (PU) Group as compared to the Full Loading (FL) Group following the 28-day healing period due to inhibited healing in the reduced loading environment. DEXA BMD in the metatarsus of the PU Group decreased 17.6% (p<0.01) at the time of the ostectomy surgery. Four-point bending stiffness of the PU Group was 4.4 times lower than that of the FL Group (p<0.01), while µCT and histomorphometry demonstrated reduced periosteal callus area (p<0.05), mineralizing surface (p<0.05), mineral apposition rate (p<0.001), bone formation rate (p<0.001), and periosteal/endosteal osteoblast numbers (p<0.001/p<0.01, respectively) as well as increased periosteal osteoclast number (p<0.05). These data provide strong evidence that the mechanical environment dramatically affects the fracture healing cascade, and likely has a negative impact on Haversian system healing during spaceflight.

The roles of architecture and estrogen depletion in microdamage risk in trabecular bone

Bone quantity, or density, has insufficient power to discriminate fracture risk in individuals. Additional measures of bone quality, such as microarchitectural characteristics and bone tissue properties, including the presence of damage, may improve the diagnosis of fracture risk. Microdamage and microarchitecture are two aspects of trabecular bone quality that are interdependent, with several microarchitectural changes strongly correlated to damage risk after compensating for bone density. This study aimed to delineate the effects of microarchitecture and estrogen depletion on microdamage susceptibility in trabecular bone using an ovariectomized sheep model to mimic post-menopausal osteoporosis. The propensity for microdamage formation in trabecular bone of the distal femur was studied using a sequence of compressive and torsional overloads. Ovariectomy had only minor effects on the microarchitecture at this anatomic site. Microdamage was correlated to bone volume fraction and structure model index (SMI), and ovariectomy increased the sensitivity to these parameters. The latter may be due to either increased resorption cavities acting as stress concentrations or to altered bone tissue properties. Pre-existing damage was also correlated to new damage formation. However, sequential loading primarily generated new cracks as opposed to propagating existing cracks, suggesting that pre-existing microdamage contributes to further damage of bone by shifting load bearing to previously undamaged trabeculae, which are subsequently damaged. The transition from plate-like to rod-like trabeculae, indicated by SMI, dictates this shift, and may be a hallmark of bone that is already predisposed to accruing greater levels of damage through compromised microarchitecture.

An In Vivo Ovine Model of Bone Tissue Alterations in Simulated Microgravity Conditions

Microgravity and its inherent reduction in body-weight associated mechanical loading encountered during spaceflight have been shown to produce deleterious effects on important human physiological processes. Rodent hindlimb unloading is the most widely-used ground-based microgravity model. Unfortunately, results from these studies are difficult to translate to the human condition due to major anatomic and physiologic differences between the two species such as bone microarchitecture and healing rates. The use of translatable ovine models to investigate orthopedic-related conditions has become increasingly popular due to similarities in size and skeletal architecture of the two species. Thus, a new translational model of simulated microgravity was developed using common external fixation techniques to shield the metatarsal bone of the ovine hindlimb during normal daily activity over an 8 week period. Bone mineral density, quantified via dual-energy X-ray absorptiometry, decreased 29.0% (p < 0.001) in the treated metatarsi. Post-sacrifice biomechanical evaluation revealed reduced bending modulus (-25.8%, p < 0.05) and failure load (-27.8%, p < 0.001) following the microgravity treatment. Microcomputed tomography and histology revealed reduced bone volume (-35.9%, p < 0.01), trabecular thickness (-30.9%, p < 0.01), trabecular number (-22.5%, p < 0.05), bone formation rate (-57.7%, p < 0.01), and osteoblast number (-52.5%, p < 0.001), as well as increased osteoclast number (269.1%, p < 0.001) in the treated metatarsi of the microgravity group. No significant alterations occurred for any outcome parameter in the Sham Surgery Group. These data indicate that the external fixation technique utilized in this model was able to effectively unload the metatarsus and induce significant radiographic, biomechanical, and histomorphometric alterations that are known to be induced by spaceflight. Further, these findings demonstrate that the physiologic mechanisms driving bone remodeling in sheep and humans during prolonged periods of unloading (specifically increased osteoclast activity) are more similar than previously utilized models, allowing more comprehensive investigations of microgravity-related bone remodeling as it relates to human spaceflight.

Bony ingrowth potential of 3D-printed porous titanium alloy: a direct comparison of interbody cage materials in an in vivo ovine lumbar fusion model

BACKGROUND CONTEXT: There is significant variability in the materials commonly used for interbody cages in spine surgery. It is theorized that three-dimensional (3D)-printed interbody cages using porous titanium material can provide more consistent bone ingrowth and biological fixation. PURPOSE: The purpose of this study was to provide an evidence-based approach to decisionmaking regarding interbody materials for spinal fusion. STUDY DESIGN: A comparative animal study was performed. METHODS: A skeletally mature ovine lumbar fusion model was used for this study. Interbody fusions were performed at L2-L3 and L4-L5 in 27 mature sheep using three different interbody cages (ie, polyetheretherketone [PEEK], plasma sprayed porous titanium-coated PEEK [PSP], and 3D-printed porous titanium alloy cage [PTA]). Non-destructive kinematic testing was performed in the three primary directions of motion. The specimens were then analyzed using micro-computed tomography (μ-CT); quantitative measures of the bony fusion were performed. Histomorphometric analyses were also performed in the sagittal plane through the interbody device. Outcome parameters were compared between cage designs and time points. RESULTS: Flexion-extension range of motion (ROM) was statistically reduced for the PTA group compared with the PEEK cages at 16 weeks (p-value=.02). Only the PTA cages demonstrated a statistically significant decrease in ROM and increase in stiffness across all three loading directions between the 8-week and 16-week sacrifice time points (p-value≤.01). Micro-CT data demonstrated significantly greater total bone volume within the graft window for the PTA cages at both 8 weeks and 16 weeks compared with the PEEK cages (p-value<.01). CONCLUSIONS: A direct comparison of interbody implants demonstrates significant and measurable differences in biomechanical, μ-CT, and histologic performance in an ovine model. The 3Dprinted porous titanium interbody cage resulted in statistically significant reductions in ROM, increases in the bone ingrowth profile, as well as average construct stiffness compared with PEEK and PSP.

Evaluation of a polyetheretherketone (PEEK) titanium composite interbody spacer in an ovine lumbar interbody fusion model: biomechanical, microcomputed tomographic, and histologic analyses

BACKGROUND CONTEXT The most commonly used materials used for interbody cages are titanium metal and polymer polyetheretherketone (PEEK). Both of these materials have demonstrated good biocompatibility. A major disadvantage associated with solid titanium cages is their radiopacity, limiting the postoperative monitoring of spinal fusion via standard imaging modalities. However, PEEK is radiolucent, allowing for a temporal assessment of the fusion mass by clinicians. On the other hand, PEEK is hydrophobic, which can limit bony ingrowth. Although both PEEK and titanium have demonstrated clinical success in obtaining a solid spinal fusion, innovations are being developed to improve fusion rates and to create stronger constructs using hybrid additive manufacturing approaches by incorporating both materials into a single interbody device. PURPOSE The purpose of this study was to examine the interbody fusion characteristic of a PEEK Titanium Composite (PTC) cage for use in lumbar fusion. STUDY DESIGN/SETTING Thirty-four mature female sheep underwent two-level (L2-L3 and L4-L5) interbody fusion using either a PEEK or a PTC cage (one of each per animal). Animals were sacrificed at 0, 8, 12, and 18 weeks post surgery. MATERIALS AND METHODS Post sacrifice, each surgically treated functional spinal unit underwent non-destructive kinematic testing, microcomputed tomography scanning, and histomorphometric analyses. RESULTS Relative to the standard PEEK cages, the PTC constructs demonstrated significant reductions in ranges of motion and a significant increase in stiffness. These biomechanical findings were reinforced by the presence of significantly more bone at the fusion site as well as ingrowth into the porous end plates. CONCLUSIONS Overall, the results indicate that PTC interbody devices could potentially lead to a more robust intervertebral fusion relative to a standard PEEK device in a clinical setting.

Advanced Imaging in Equine Dental Disease

Dental and sinus disorders are relatively common and of major clinical importance in equine medicine. Advanced diagnostic imaging has become an integral part of equine veterinary medicine. Advanced imaging has progressed the understanding, diagnosis, and treatment of dental- and sinus-related diseases. As a clinician, it is important to realize the value of advanced diagnostic imaging. Although computed tomography and magnetic resonance imaging are both significantly more expensive compared with other diagnostic tools, the financial cost of inaccurate diagnosis and treatment can often result in higher overall costs.