Jérôme Labille

TiO2-based nanoparticles released in water from commercialized sunscreens in a life-cycle perspective: Structures and quantities

This work investigates the physical-chemical evolution during artificial aging in water of four commercialized sunscreens containing TiO₂-based nanocomposites. Sunscreens were analyzed in terms of mineralogy and TiO₂ concentration. The residues formed after aging were characterized in size, shape, chemistry and surface properties. The results showed that a significant fraction of nano-TiO₂ residues was released from all sunscreens, despite their heterogeneous behaviors. A stable dispersion of submicronic aggregates of nanoparticles was generated, representing up to 38 w/w% of the amount of sunscreen, and containing up to 30% of the total nano-TiO₂ initially present in the creams. The stability of the dispersion was tested as a function of salt concentration, revealing that in seawater conditions, a major part of these nano-TiO₂ residues will aggregate and sediment. These results were put in perspective with consumption and life cycle of sunscreens to estimate the amount of nano-TiO₂ potentially released into AQUATIC environment.

Heteroaggregation of Titanium Dioxide Nanoparticles with Model Natural Colloids under Environmentally Relevant Conditions

The heteroaggregation of engineered nanoparticles (ENPs) with natural colloids (NCs), which are ubiquitous in natural surface waters, is a crucial process affecting the environmental transport and fate of ENPs. Attachment efficiencies for heteroaggregation, α hetero, are required as input parameters in environmental fate models to predict ENP concentrations and contribute to ENP risk assessment. Here, we present a novel method for determining α hetero values by using a combination of laser diffraction measurements and aggregation modeling based on the Smoluchowski equation. Titanium dioxide nanoparticles (TiO2 NPs, 15 nm) were used to demonstrate this new approach together with larger silicon dioxide particles (SiO2, 0.5 μm) representing NCs. Heteroaggregation experiments were performed at different environmentally relevant solution conditions. At pH 5 the TiO2 NPs and the SiO2 particles are of opposite charge, resulting in α hetero values close to 1. At pH 8, where all particles are negatively charged, α hetero was strongly affected by the solution conditions, with α hetero ranging from <0.001 at low ionic strength to 1 at conditions with high NaCl or CaCl2 concentrations. The presence of humic acid stabilized the system against heteroaggregation.

Ecotoxicological effects of an aged TiO2 nanocomposite measured as apoptosis in the anecic earthworm Lumbricus terrestris after exposure through water, food and soil.

Titanium dioxide nanoparticles seem to have a low toxicity to terrestrial organisms, though few studies are published in this area. TiO(2) used in sunscreens are nanocomposites where TiO(2) has been coated with magnesium, silica or alumina, as well as amphiphilic organics like polydimethyl siloxane (PDMS), and these coatings are modified by ageing. We assessed the ecotoxicity and propensity for bioaccumulation of an aged TiO(2) nanocomposite used in sunscreen cosmetics, and its potential effect on the frequency of apoptosis in different earthworm tissues. The earthworm Lumbricus terrestris was exposed to the TiO(2) nanocomposite for 7 days in water or 2-8 weeks in soil with the nanocomposite mixed either into food or soil at concentrations ranging from 0 to 100 mg kg(-1). Apoptosis was then measured by immunohistochemistry and Ti localized by XRF microscopy. Results showed no mortality, but an enhanced apoptotic frequency which was higher in the cuticule, intestinal epithelium and chloragogenous tissue than in the longitudinal and circular musculature. TiO(2) nanoparticles did not seem to cross the intestinal epithelium/chloragogenous matrix barrier to enter the coelomic liquid, or the cuticule barrier to reach the muscular layers. No bioaccumulation of TiO(2) nanocomposites could thus be observed.

Environmental impact of sunscreen nanomaterials: Ecotoxicity and genotoxicity of altered TiO2 nanocomposites on Vicia faba

Mineral sunscreen nanocomposites, based on a nano-TiO(2) core, coated with aluminium hydroxide and dimethicone films, were submitted to an artificial ageing process. The resulting Altered TiO(2) Nanocomposites (ATN) were then tested in the liquid phase on the plant model Vicia faba, which was exposed 48 h to three nominal concentrations: 5, 25 and 50 mg ATN/L. Plant growth, photosystem II maximum quantum yield, genotoxicity (micronucleus test) and phytochelatins levels showed no change compared to controls. Oxidative stress biomarkers remained unchanged in shoots while in roots, glutathione reductase activity decreased at 50 mg ATN/L and ascorbate peroxidase activity decreased for 5 and 25 mg ATN/L. Nevertheless, despite the weak response of biological endpoints, ICP-MS measurements revealed high Ti and Al concentrations in roots, and X-ray fluorescence micro-spectroscopy revealed titanium internalization in superficial root tissues. Eventual long-term effects on plants may occur.

Heteroaggregation of Titanium Dioxide Nanoparticles with Natural Clay Colloids

To better understand and predict the fate of engineered nanoparticles in the water column, we assessed the heteroaggregation of TiO2 nanoparticles with a smectite clay as analogues for natural colloids. Heteroaggregation was evaluated as a function of water salinity (10(-3) and 10(-1) M NaCl), pH (5 and 8), and selected nanoparticle concentration (0-4 mg/L). Time-resolved laser diffraction was used, coupled to an aggregation model, to identify the key mechanisms and variables that drive the heteroaggregation of the nanoparticles with colloids. Our data show that, at a relevant concentration, nanoparticle behavior is mainly driven by heteroaggregation with colloids, while homoaggregation remains negligible. The affinity of TiO2 nanoparticles for clay is driven by electrostatic interactions. Opposite surface charges and/or high ionic strength favored the formation of primary heteroaggregates via the attachment of nanoparticles to the clay. The initial shape and dispersion state of the clay as well as the nanoparticle/clay concentration ratio also affected the nature of the heteroaggregation mechanism. With dispersed clay platelets (10(-3) M NaCl), secondary heteroaggregation driven by bridging nanoparticles occurred at a nanoparticle/clay number ratio of greater than 0.5. In 10(-1) M NaCl, the clay was preaggregated into larger and more spherical units. This favored secondary heteroaggregation at lower nanoparticle concentration that correlated to the nanoparticle/clay surface area ratio. In this latter case, a nanoparticle to clay sticking efficiency could be determined.

Stability of nanoparticles in water.

Aqueous systems represent a likely carrier for manufactured nanoparticles upon their introduction into the natural environment. Their behavior in water, and in turn the risk that is posed by these materials to environmental and human communities, is a top concern. In terms of risk assessment, nanoparticle exposure to organisms is largely driven by their dispersion and behavior in aqueous systems, while their potential hazard, although not always well understood, is often related to their surface speciation. Both of these characteristics arise from the reactions that occur at the solid/liquid interface. The objective of this article is to establish the current state of the science with regard to the possible changes in surface properties and/or behavior of manufactured nanoparticles in different aqueous solutions of model and inorganic composition. The general reactions occurring at the nanoparticle/water interface, or between nanoparticles themselves, are first introduced. Following this, metal oxides, pure metals and carbon nanoparticles are considered on a case-by-case basis.

Addressing the complexity of water chemistry in environmental fate modeling for engineered nanoparticles.

Engineered nanoparticle (ENP) fate models developed to date - aimed at predicting ENP concentration in the aqueous environment - have limited applicability because they employ constant environmental conditions along the modeled system or a highly specific environmental representation; both approaches do not show the effects of spatial and/or temporal variability. To address this conceptual gap, we developed a novel modeling strategy that: 1) incorporates spatial variability in environmental conditions in an existing ENP fate model; and 2) analyzes the effect of a wide range of randomly sampled environmental conditions (representing variations in water chemistry). This approach was employed to investigate the transport of nano-TiO2 in the Lower Rhône River (France) under numerous sets of environmental conditions. The predicted spatial concentration profiles of nano-TiO2 were then grouped according to their similarity by using cluster analysis. The analysis resulted in a small number of clusters representing groups of spatial concentration profiles. All clusters show nano-TiO2 accumulation in the sediment layer, supporting results from previous studies. Analysis of the characteristic features of each cluster demonstrated a strong association between the water conditions in regions close to the ENP emission source and the cluster membership of the corresponding spatial concentration profiles. In particular, water compositions favoring heteroaggregation between the ENPs and suspended particulate matter resulted in clusters of low variability. These conditions are, therefore, reliable predictors of the eventual fate of the modeled ENPs. The conclusions from this study are also valid for ENP fate in other large river systems. Our results, therefore, shift the focus of future modeling and experimental research of ENP environmental fate to the water characteristic in regions near the expected ENP emission sources. Under conditions favoring heteroaggregation in these regions, the fate of the ENPs can be readily predicted.

Ecotoxicological assessment of TiO2 byproducts on the earthworm Eisenia fetida

The increasing production of nanomaterials will in turn increase the release of nanosized byproducts to the environment. The aim of this study was to evaluate the behaviour, uptake and ecotoxicity of TiO(2) byproducts in the earthworm Eisenia fetida. Worms were exposed to suspensions containing 0.1, 1 and 10 mg/L of byproducts for 24 h. Size of TiO(2) byproducts showed aggregation of particles up to 700 μm with laser diffraction. Only worms exposed at 10 mg/L showed bioaccumulation of titanium (ICP-AES), increasing expression of metallothionein and superoxide dismutase mRNA (Real-time PCR) and induction of apoptotic activity (Apostain and TUNEL). TiO(2) byproducts did not induce cytotoxicity on cœlomocytes, but a significant decrease of phagocytosis was observed starting from 0.1 mg/L. In conclusion, bioaccumulation of byproducts and their production of reactive oxygen species could be responsible for the alteration of the antioxidant system in worms.

Long-term aging of a CeO2 based nanocomposite used for wood protection

A multi-scale methodology was used to characterize the long-term behavior and chemical stability of a CeO2-based nanocomposite used as UV filter in wood stains. ATR-FTIR and (13)C NMR demonstrated that the citrate coated chelates with Ce(IV) through its central carboxyl- and its α-hydroxyl- groups at the surface of the unaged nanocomposite. After 42 days under artificial daylight, the citrate completely disappeared and small amount of degradation products remained attached to the surface even after 112 days. Moreover, the release/desorption of the citrate layer led to a surface reorganization of the nano-sized CeO2 core observed by XANES (Ce L3-edge). Such a surface and structural transformation of the commercialized nanocomposite could have implications in term of fate, transport, and potential impacts towards the environment.

Destabilization of montmorillonite suspensions by Ca2+ and succinoglycan

Abstract Aggregation of colloidal clay particles (Na-montmorillonite) by CaCl2 and anionic polysaccharide (succinoglycan) in turbulent conditions was investigated using time-resolved size measurements by laser diffraction on diluted (50 mg l-1) and stirred suspensions. Excess of Ca2+ ions promotes coagulation of the clay, reducing interparticle repulsions, and allows adsorption of succinoglycan, inducing bridging flocculation. Growth/breakage cycles, characteristic of the turbulent conditions, cause the macromolecules to be incorporated in the innermost of the flocs, where the morphological units are shown by confocal microscopy to be the micrometric Ca-clay particles. Such incorporation results in an increased floc tensile strength, depending on the amount of macromolecules adsorbed, with a maximum at polysaccharide concentrations of 2 wt.% with respect to clay mass.