Jerome P. Claverie

Ortho -Phosphinobenzenesulfonate: A Superb Ligand for Palladium-Catalyzed Coordination–Insertion Copolymerization of Polar Vinyl Monomers

Ligands, Lewis bases that coordinate to the metal center in a complex, can completely change the catalytic behavior of the metal center. In this Account, we summarize new reactions enabled by a single class of ligands, phosphine-sulfonates (ortho-phosphinobenzenesulfonates). Using their palladium complexes, we have developed four unusual reactions, and three of these have produced novel types of polymers. In one case, we have produced linear high-molecular weight polyethylene, a type of polymer that group 10 metal catalysts do not typically produce. Secondly, complexes using these ligands catalyzed the formation of linear poly(ethylene-co-polar vinyl monomers). Before the use of phosphine-sulfonate catalysts, researchers could only produce ethylene/polar monomer copolymers that have different branched structures rather than linear ones, depending on whether the polymers were produced by a radical polymerization or a group 10 metal catalyzed coordination polymerization. Thirdly, these phosphine-sulfonate catalysts produced nonalternating linear poly(ethylene-co-carbon monoxide). Radical polymerization gives ethylene-rich branched ethylene/CO copolymers copolymers. Prior to the use of phosphine-sulfonates, all of the metal catalyzed processes gave completely alternating ethylene/carbon monoxide copolymers. Finally, we produced poly(polar vinyl monomer-alt-carbon monoxide), a copolymerization of common polar monomers with carbon monoxide that had not been previously reported. Although researchers have often used symmetrical bidentate ligands such as diimines for the polymerization catalysis, phosphine-sulfonates are unsymmetrical, containing two nonequivalent donor units, a neutral phosphine, and an anionic sulfonate. We discuss the features that make this ligand unique. In order to understand all of the new reactions facilitated by this special ligand, we discuss both the steric effect of the bulky phosphines and electronic effects. We provide a unified interpretation of the unique reactivity by considering of the net charge and the enhanced back donation in the phosphine-sulfonate complexes.

Engineering the Absorption and Field Enhancement Properties of Au-TiO2 Nanohybrids via Whispering Gallery Mode Resonances for Photocatalytic Water Splitting.

Recently, surface plasmon resonance (SPR) effects have been widely used to construct photocatalysts which are active in the visible spectral region. Such plasmonic photocatalysts usually comprise a semiconductor material transparent in the visible range (such as TiO2) and plasmonic nano-objects (e.g., Au nanoparticles (Au NPs)). Specific SPRs, though, only partially cover the visible spectrum and feature weak light absorption. Here, we explore the unique role played by whispering gallery mode (WGM) resonances in the expression of the photocatalytic activity of plasmonic photocatalysts. Using numerical simulations, we demonstrate that, by solely exploiting a proper geometrical arrangement and WGM resonances in a TiO2 sphere, the plasmonic absorption can be extended over the entire visible range and can be increased by more than 40 times. Furthermore, the local electric field at the Au-TiO2 interface is also considerably enhanced. These results are experimentally corroborated, by means of absorption spectroscopy and Raman measurements. Accordingly, such WGM-assisted plasmonic photocatalysts, when employed in water splitting experiments, exhibit enhanced activity in the visible range. Our findings show a promising and straightforward way to design full solar spectrum photocatalysts.

Enhanced Photocatalytic Property of Reduced Graphene Oxide/TiO2 Nanobelt Surface Heterostructures Constructed by an In Situ Photochemical Reduction Method

A facile method is proposed to assemble graphene oxide (GO) on the surface of a TiO2 nanobelt followed by an in situ photocatalytic reduction to form reduced graphene oxide (rGO)/TiO2 nanobelt surface heterostructures. The special colloidal properties of GO and TiO2 nanobelt are exploited as well as the photocatalytic properties of TiO2 . Using water-ethanol solvent mixtures, GO nanosheets are tightly wrapped around the surface of the TiO2 nanobelts through an aggregation process and are then reduced in situ under UV-light irradiation to form rGO/TiO2 nanobelt surface heterostructures. The heterostructures enhance the separation of the photoinduced carriers, which results in a higher photocurrent due to the special electronic characteristics of rGO. Compared to TiO2 nanobelts, the rGO/TiO2 nanobelt surface heterostructures possess higher photocatalytic activity for the degradation of methyl orange and for the production of hydrogen from water, as well as excellent recyclability, with no loss of activity over five cycles.

Structure-activity relationship of palladium phosphanesulfonates: toward highly active palladium-based polymerization catalysts.

Palladium phosphanesulfonate [R(2)P(C(6)H(4)-o-SO(3))PdMeL] catalysts permit the copolymerization of an exceptional large number of functional olefins with ethylene. However, these catalysts usually have reduced activity. We here have conducted a systematic study on the influence of the phosphane substituent, R, on activity and molecular weight. Phosphanes with strong σ-donating character are shown to lead to the most active catalysts. Thus, the catalyst based on phosphane bis-tert-butyl-phosphanyl-benzenesulfonic acid (R=tBu) exhibits unprecedented high activity, rapidly polymerizing ethylene at room temperature to yield a linear polymer of high molecular weight (M(w)=116,000 g mol(-1)). The influence of the R group on the catalyst ability to incorporate methyl acrylate is also investigated.

Amphiphilic Polyethylenes Leading to Surfactant-Free Thermoresponsive Nanoparticles

Linear copolymers of ethylene and acrylic acid (PEAA) were prepared by catalytic polymerization of ethylene and tert-butyl acrylate followed by hydrolysis of the ester groups. The copolymers contained COOH groups inserted into the crystalline unit cell with formation of intramolecular hydrogen-bonds, as established on the basis of differential scanning calorimetry (DSC), Fourier-transform infrared spectroscopy (FTIR), and X-ray diffraction (XRD) studies. A solvent-exchange protocol, with no added surfactant, converted a solution in tetrahydrofuran of a PEAA sample containing 12 mol % of acrylic acid (AA) into a colloidally stable aqueous suspension of nanoparticles. Transmission electron microscopy (TEM), dynamic light scattering (DLS), and high sensitivity differential scanning calorimetry (HS-DSC) were used to characterize the nanoparticles. They are single crystals of elongated shape with a polar radius of 49 nm (σ = 15 nm) and an equatorial radius of 9 nm (σ = 3 nm) stabilized in aqueous media via carboxylate groups located preferentially on the particle/water interface. The PEAA (AA: 12 mol %) nanoparticles dispersed in aqueous media exhibited a remarkable reversible thermoresponsive behavior upon heating/cooling from 25 to 80 °C.

TiO2@Carbon Photocatalysts: The Effect of Carbon Thickness on Catalysis.

Nanocomposites composed of TiO2 and carbon materials (C) are widely popular photocatalysts because they combine the advantages of TiO2 (good UV photocatalytic activity, low cost, and stability) to the enhanced charge carrier separation and lower charge transfer resistance brought by carbon. However, the presence of carbon can also be detrimental to the photocatalytic performance as it can block the passage of light and prevent the reactant from accessing the TiO2 surface. Here using a novel interfacial in situ polymer encapsulation-graphitization method, where a glucose-containing polymer was grown directly on the surface of the TiO2, we have prepared uniform TiO2@C core-shell structures. The thickness of the carbon shell can be precisely and easily tuned between 0.5 and 8 nm by simply programming the polymer growth on TiO2. The resulting core@shell TiO2@C nanostructures are not black and they possess the highest activity for the photodegradation of organic compounds when the carbon shell thickness is 1-2 nm, corresponding to ∼3-5 graphene layers. Photoluminescence and photocurrent generation tests further confirm the crucial contribution of the carbon shell on charge carrier separation and transport. This in situ polymeric encapsulation approach allows for the careful tuning of the thickness of graphite-like carbon, and it potentially constitutes a general and efficient route to prepare other oxide@C catalysts, which can therefore largely expand the applications of nanomaterials in catalysis.

A Simple Method for Forming Hybrid Core-Shell Nanoparticles Suspended in Water

Core-shell hybrid nanoparticles, where the core is an inorganic nanoparticle and the shell an organic polymer, are prepared by a two-step method. Inorganic nanoparticles are first dispersed in water using poly(acrylic acid) (PAA) prepared by reversible addition fragmentation chain transfer (RAFT) polymerization as dispersant. Then, the resulting dispersion is engaged in a radical emulsion polymerization process whereby a hydrophobic organic monomer (styrene and butyl acrylate) is polymerized to form the shell of the hybrid nanoparticle. This method is extremely versatile, allowing the preparation of a variety of nanocomposites with metal oxides (alumina, rutile, anatase, barium titanate, zirconia, copper oxide), metals (Mo, Zn), and even inorganic nitrides (Si3N4).

High-Energy Faceted SnO2-Coated TiO2 Nanobelt Heterostructure for Near-Ambient Temperature-Responsive Ethanol Sensor

A SnO2 gas sensor was prepared by a two-step oxidation process whereby a Sn(II) precursor was partially oxidized by a hydrothermal process and the resulting Sn3O4 nanoplates were thermally oxidized to yield SnO2 nanoplates. The SnO2 sensor was selective and responsive toward ethanol at a temperature as low as 43 °C. This low sensing temperature stems from the rapid charge transport within SnO2 and from the presence of high-energy (001) facets available for oxygen chemisorption. SnO2/TiO2 nanobelt heterostructures were fabricated by a similar two-step process in which TiO2 nanobelts acted as support for the epitaxial growth of intermediate Sn3O4. At temperatures ranging from 43 to 276 °C, the response of these branched nanobelts is more than double the response of SnO2 for ethanol detection. Our observations demonstrate the potential of low-cost SnO2-based sensors with controlled morphology and reactive facets for detecting gases around room temperature.

TiO2@C core-shell nanoparticles formed by polymeric nano-encapsulation.

TiO2 semiconducting nanoparticles are known to be photocatalysts of moderate activity due to their high band-gap and high rate of electron-hole recombination. The formation of a shell of carbon around the core of TiO2, i.e., the formation of TiO2@C nanoparticles, is believed to partly alleviate these problems. It is usually achieved by a hydrothermal treatment in a presence of a sugar derivative. We present here a novel method for the formation of highly uniform C shell around TiO2 nanoparticles. For this purpose, TiO2 nanoparticles were dispersed in water using an oligomeric dispersant prepared by Reversible Addition-Fragmentation chain Transfer (RAFT) polymerization. Then the nanoparticles were engaged into an emulsion polymerization of acrylonitrile, resulting in the formation of a shell of polyacrylonitrile (PAN) around each TiO2 nanoparticles. Upon pyrolysis, the PAN was transformed into carbon, resulting in the formation of TiO2@C nanoparticles. The structure of the resulting particles was elucidated by X-Ray diffraction, FTIR, UV-VIS and Raman spectroscopy as well as TEM microscopy. Preliminary results about the use of the TiO2@C particles as photocatalysts for the splitting of water are presented. They indicate that the presence of the C shell is responsible for a significant enhancement of the photocurrent.

Polydopamine-Supported Lipid Bilayers

We report the formation of lipid membranes supported by a soft polymeric cushion of polydopamine. First, 20 nm thick polydopamine films were formed on mica substrates. Atomic force microscopy imaging indicated that these films were also soft with a surface roughness of 2 nm under hydrated conditions. A zwitterionic phospholipid bilayer was then deposited on the polydopamine cushion by fusion of dimyristoylphosphatidylcholine (DMPC) and dioleoylphosphatidylcholine (DOPC) vesicles. Polydopamine films preserved the lateral mobility of the phospholipids as shown by fluorescence microscopy recovery after photobleaching (FRAP) experiments. Diffusion coefficients of ~5.9 and 7.2 µm2 s−1 were respectively determined for DMPC and DOPC at room temperature, values which are characteristic of lipids in a free standing bilayer system.