Jesse O. Omamogho

Porous Graphitized Carbon Monolith as an Electrode Material for Probing Direct Bioelectrochemistry and Selective Detection of Hydrogen Peroxide

For the first time, graphitized carbon particles with a high surface area have been prepared and evaluated as a new material for probing direct electrochemistry of hemoglobin (Hb). Scanning electron microscopy (SEM) and transmission electron microscopy (TEM) imaging revealed that the carbon monolithic skeleton was constructed by a series of mesopores with irregular shapes and an average pore diameter of ~5.6 nm. With a surface area of 239.6 m(2)/g, carbon particles exhibited three major Raman peaks as commonly observed for carbon nanotubes and other carbon materials, i.e., the sp(3) and sp(2) carbon phases coexisted in the sample. A glassy carbon electrode modified with carbon monoliths and didodecyldimethylammonium bromide exhibited direct electron transfer between Hb molecules and the underlying electrode with a transfer rate constant of 6.87 s(-1). The enzyme electrode displayed a pair of quasi-reversible reduction-oxidation peaks at -0.128 and -0.180 V, reflecting the well-known feature of the heme [Fe(3+)/Fe(2+)] redox couple: a surface-controlled electrochemical process with one electron transfer. This reagentless biosensing approach was capable of detecting H(2)O(2), a simple molecule but plays an important role in analytical and biological chemistry, as low as 0.1 μM with linearity of 0.1-60 μM and a response time of <0.8 s, comparing favorably with other carbon based electrodes (5 s).

Cyclodextrin-modified capillary electrophoresis for achiral and chiral separation of ergostane and lanostane compounds extracted from the fruiting body of Antrodia camphorata.

A CD‐modified capillary electrophoretic method has been developed for achiral and chiral analysis of seven bioactive compounds isolated from the fruiting body of Antrodia camphorata. Such important target analytes exhibit similar chemical structures and are known for their diverse properties including antioxidant and anticancer effects. The analytes were separated in 25 min using a pH 9.3, 20 mM sodium borate buffer containing 20 mM methyl‐β‐CD and 30 mM sulfobutylether‐β‐CD. With the exception of the optical isomer pairs (antcin B or zhankuic acid A, zhankuic acid C, and antcin A), the remaining bioactive compounds including the chiral pair antcin C were baseline‐separated. Analysis time was noticeably longer to baseline separate all of the above chiral pairs (∼38 min) by adding 5% DMF to the running buffer. The migration order was reversed compared with the HPLC elution. More hydrophobic compounds complexed favorably with methyl‐β‐CD and emerged earlier in the electropherogram than their more hydrophilic counterparts which were strongly associated with sulfobutylether‐β‐CD. The simple capillary electrophoretic method developed was applicable for rapid separation and characterization of several important bioactive compounds isolated from the fruiting body of A. camphorata.

Kinetic investigation of narrow-bore columns packed with prototype sub-2 μm superficially porous particles with various shell thickness

The recent successful breakthrough of sub-3 μm shell particles in HPLC has triggered considerable research efforts toward the design of new brands of core-shell particles. We investigated the mass transfer mechanism of a few analytes in narrow-bore columns packed with prototype 1.7 μm shell particles, made of 1.0, 1.2, and 1.4 μm solid nonporous cores surrounded by porous shells 350, 250, and 150 nm thick, respectively. Three probe solutes, uracil, naphthalene, and insulin, were chosen to assess the kinetic performance of these columns. Inverse size exclusion chromatography, peak parking experiments, and the numerical integration of the experimental peak profiles were carried out in order to measure the external, internal, and total column porosities, the true bulk diffusion coefficients of these analytes, the height equivalent to a theoretical plate, the longitudinal diffusion term, and the trans-particle mass transfer resistance term. The residual eddy diffusion term was measured by difference. The results show the existence of important trans-column velocity biases (7%) possibly due to the presence of particle multiplets in the slurry mixture used during the packing process. Our results illustrates some of the difficulties encountered by scientists preparing and packing shell particles into narrow-bore columns.

Comparison between the efficiencies of sub-2 μm C18 particles packed in narrow bore columns.

The chromatographic performance of two types of core-shell particles and two fully porous particles packed in 2.1 ID × 50 mm columns was investigated. Comparisons of the performances of the EiS-150-C(18) to that of the Kinetex-1.7 μm-C(18), Acquity-BEH-1.7 μm-C(18), and Zorbax-XDB-1.8 μm-C(18) are made and discussed. The physical factors that govern the performance of these columns, such as particle size distribution and column external, total, and particle porosity of the C(18) packing materials were among the prime foci of investigation. The differences in the mass transfer behavior measured using naphtho[2,3-a]pyrene between these columns provides an indication of improved performance of the new EiS-150-C(18) column. The minimum reduced height equivalent to a theoretical plate (HETP) value for the EiS-150-C(18), h(min) = 1.95, was achieved and was comparable to that obtained from the C(18) phases of the Kinetex (h(min) = 2.53), the Acquity (h(min) = 2.26), and the Zorbax (h(min) = 2.57) columns. This study reveals the importance of the dimension of the shell thickness in controlling the performance of columns packed with shell particles in narrow bore columns.

Silica hydride intermediate for octadecylsilica and phenyl bonded phase preparation via heterogeneous hydrosilation in supercritical carbon dioxide

Investigations into the preparation of silica hydride intermediate in supercritical carbon dioxide (sc-CO(2)) that avoids the use of organic solvents such as toluene or dioxane are described. The effects of reaction temperature, pressure and time on the surface coverage of the supercritical fluid generated silica hydride intermediate were studied. Under optimised supercritical conditions of 120°C, 483 bar and 3 h reaction time, silica hydride (Si-H) conversion efficiencies of ca. 40% were achieved for the hydride intermediate prepared from a monofunctional silane reagent (dimethylmethoxysilane). Si-H conversion efficiencies (as determined from (29)Si CP-MAS NMR spectral analysis) for the hydride intermediate prepared from triethoxysilane (TES) in sc-CO(2) were found to be comparable to those obtained using a TES silanisation approach in an organic solvent. (13)C and (29)Si CP-MAS-NMR spectroscopy was employed to provide a complete structural assignment of the silica hydride intermediates. Furthermore, supercritical CO(2) was subsequently employed as a reaction medium for the heterogenous hydrosilation of silica hydride with octadecene and with styrene, in the presence of a free radical initiator. These supercritical fluid generated reversed-phase materials were prepared in a substantially reduced reaction time (3 h) compared to organic solvent based methods (100 h reaction time). Silica functionalisation in sc-CO(2) presents an efficient and clean alternative to organic solvent based methods for the preparation of important silica hydride intermediate and silica bonded stationary phases via a hydrosilation approach.

A new N-hydroxyethyliminodiacetic acid modified core–shell silica phase for chelation ion chromatography of alkaline earth, transition and rare earth elements

Bare core-shell silica (1.7μm) has been modified with iminodiacetic acid functional groups via standard silane chemistry, forming a new N-hydroxyethyliminodiacetic acid (HEIDA) functionalised core-shell stationary phase. The column was applied in high-performance chelation ion chromatography and evaluated for the retention of alkaline earth, transition and heavy metal cations. The influence of nitric acid eluent concentration, addition of complexing agent dipicolinic acid, eluent pH and column temperature on the column performance was investigated. The efficiencies obtained for transition and heavy metal cations (and resultant separations) were comparable or better than those previously obtained for alternative fully porous silica based chelation stationary phases, and a similarly modified monolithic silica column, ranging from ∼15 to 56μm HETP. Increasing the ionic strength of the eluent with the addition of KNO3 (0.75M) and increasing the column temperature (70°C) facilitated the isocratic separation of a mixture of 14 lanthanides and yttrium in under 12min, with HETP averaging 18μm (7μm for Ce(III)).