Jessica E. Frith

The influence of substrate creep on mesenchymal stem cell behaviour and phenotype.

Human mesenchymal stem cells (hMSCs) are capable of probing and responding to the mechanical properties of their substrate. Although most biological and synthetic matrices are viscoelastic materials, previous studies have primarily focused upon substrate compressive modulus (rigidity), neglecting the relative contributions that the storage (elastic) and loss (viscous) moduli make to the summed compressive modulus. In this study we aimed to isolate and identify the effects of the viscous component of a substrate on hMSC behaviour. Using a polyacrlyamide gel system with constant compressive modulus and varying loss modulus we determined that changes to substrate loss modulus substantially affected hMSC morphology, proliferation and differentiation potential. In addition, we showed that the effect of substrate loss modulus on hMSC behaviour is due to a reduction in both passive and actively generated isometric cytoskeletal tension caused by the inherent creep of substrates with a high loss modulus. These findings highlight substrate creep, or more explicitly substrate loss modulus, as an important mechanical property of a biomaterial system that can be tailored to encourage the growth and differentiation of specific cell types.

Lateral spacing of adhesion peptides influences human mesenchymal stem cell behaviour

Mesenchymal stem cells (MSCs) have attracted great interest in recent years for tissue engineering and regenerative medicine applications due to their ease of isolation and multipotent differentiation capacity. In the past, MSC research has focussed on the effects of soluble cues, such as growth factors and cytokines; however, there is now increasing interest in understanding how parameters such as substrate modulus, specific extracellular matrix (ECM) components and the ways in which these are presented to the cell can influence MSC properties. Here we use surfaces of self-assembled maleimide-functionalized polystyrene-block-poly(ethylene oxide) copolymers (PS-PEO-Ma) to investigate how the spatial arrangement of cell adhesion ligands affects MSC behaviour. By changing the ratio of PS-PEO-Ma in mixtures of block copolymer and polystyrene homopolymer, we can create surfaces with lateral spacing of the PEO-Ma domains ranging from 34 to 62 nm. Through subsequent binding of cysteine–GRGDS peptides to the maleimide-terminated end of the PEO chains in each of these domains, we are able to present tailored surfaces of controlled lateral spacing of RGD (arginine-glycine-aspartic acid) peptides to MSCs. We demonstrate that adhesion of MSCs to the RGD-functionalized block-copolymer surfaces is through specific attachment to the presented RGD motif and that this is mediated by α5, αV, β1 and β3 integrins. We show that as the lateral spacing of the peptides is increased, the ability of the MSCs to spread is diminished and that the morphology changes from well-spread cells with normal fibroblastic morphology and defined stress-fibres, to less-spread cells with numerous cell protrusions and few stress fibres. In addition, the ability of MSCs to form mature focal adhesions is reduced on substrates with increased lateral spacing. Finally, we investigate differentiation and use qRT-PCR determination of gene expression levels and a quantitative alkaline phosphatase assay to show that MSC osteogenesis is reduced on surfaces with increased lateral spacing while adipogenic differentiation is increased. We show here, for the first time, that the lateral spacing of adhesion peptides affects human MSC (hMSC) properties and might therefore be a useful parameter with which to modify hMSC behaviour in future tissue engineering strategies.

Tailored Integrin–Extracellular Matrix Interactions to Direct Human Mesenchymal Stem Cell Differentiation

Integrins provide the primary link between mesenchymal stem cells (MSCs) and their surrounding extracellular matrix (ECM), with different integrin pairs having specificity for different ECM molecules or peptide sequences contained within them. It is widely acknowledged that the type of ECM present can influence MSC differentiation; however, it is yet to be determined how specific integrin-ECM interactions may alter this or how they change during differentiation. We determined that human bone marrow-derived mesenchymal stem cells (hMSCs) express a broad range of integrins in their undifferentiated state and show a dramatic, but transient, increase in the level of α5 integrin on day 7 of osteogenesis and an increase in α6 integrin expression throughout adipogenesis. We used a nonfouling polystyrene-block-poly(ethylene oxide)-copolymer (PS-PEO) surface to present short peptides with defined integrin-binding capabilities (RGD, IKVAV, YIGSR, and RETTAWA) to hMSCs and investigate the effects of such specific integrin-ECM contacts on differentiation. hMSCs cultured on these peptides displayed different morphologies and had varying abilities to differentiate along the osteogenic and adipogenic lineages. The peptide sequences most conducive to differentiation (IKVAV for osteogenesis and RETTAWA and IKVAV for adipogenesis) were not necessarily those that were bound by those integrin subunits seen to increase during differentiation. Additionally, we also determined that presentation of RGD, which is bound by multiple integrins, was required to support long-term viability of hMSCs. Overall we confirm that integrin-ECM contacts change throughout hMSC differentiation and show that surfaces presenting defined peptide sequences can be used to target specific integrins and ultimately influence hMSC differentiation. This platform also provides information for the development of biomaterials capable of directing hMSC differentiation for use in tissue engineering therapies.

An injectable hydrogel incorporating mesenchymal precursor cells and pentosan polysulphate for intervertebral disc regeneration

Intervertebral disc (IVD) degeneration is one of the leading causes of lower back pain and a major health problem worldwide. Current surgical treatments include excision or immobilisation, with neither approach resulting in the repair of the degenerative disc. As such, a tissue engineering-based approach in which stem cells, coupled with an advanced delivery system, could overcome this deficiency and lead to a therapy that encourages functional fibrocartilage generation in the IVD. In this study, we have developed an injectable hydrogel system based on enzymatically-crosslinked polyethylene glycol and hyaluronic acid. We examined the effects of adding pentosan polysulphate (PPS), a synthetic glycosaminoglycan-like factor that has previously been shown (in vitro and in vivo) to this gel system in order to induce chondrogenesis in mesenchymal precursor cells (MPCs) when added as a soluble factor, even in the absence of additional growth factors such as TGF-β. We show that both the gelation rate and mechanical strength of the resulting hydrogels can be tuned in order to optimise the conditions required to produce gels with the desired combination of properties for an IVD scaffold. Human immunoselected STRO-1+ MPCs were then incorporated into the hydrogels. They were shown to retain good viability after both the initial formation of the gel and for longer-term culture periods in vitro. Furthermore, MPC/hydrogel composites formed cartilage-like tissue which was significantly enhanced by the incorporation of PPS into the hydrogels, particularly with respect to the deposition of type-II-collagen. Finally, using a wild-type rat subcutaneous implantation model, we examined the extent of any immune reaction and confirmed that this matrix is well tolerated by the host. Together these data provide evidence that such a system has significant potential as both a delivery vehicle for MPCs and as a matrix for fibrocartilage tissue engineering applications.

A Defined Medium and Substrate for Expansion of Human Mesenchymal Stromal Cell Progenitors That Enriches for Osteo- and Chondrogenic Precursors

Human mesenchymal stromal cells (hMSCs) have generated significant interest due to their potential use in clinical applications. hMSCs are present at low frequency in vivo, but after isolation can be expanded considerably, generating clinically useful numbers of cells. In this study, we demonstrate the use of a defined embryonic stem cell expansion medium, mTeSR (Stem Cell Technologies), for the expansion of bone-marrow-derived hMSCs. The hMSCs grow at comparable rates, demonstrate tri-lineage differentiation potential, and show similar surface marker profiles (CD29(+), CD44(+), CD49a(+), CD73(+), CD90(+), CD105(+), CD146(+), CD166(+), CD34(-), and CD45(-)) in both the fetal bovine serum (FBS)-supplemented medium and mTeSR. However, expression of early differentiation transcription factors runt-related transcription factor 2, sex-determining region Y box 9, and peroxisome proliferator-activated receptor gamma changed significantly. Both runt-related transcription factor 2 and sex-determining region Y box 9 were upregulated, whereas peroxisome proliferator-activated receptor gamma was downregulated in mTeSR compared with FBS. Although osteogenic and chondrogenic differentiation was comparable in cells grown in mTeSR compared to FBS, adipogenic differentiation was significantly decreased in mTeSR-expanded cells, both in terms of gene expression and absolute numbers of adipocytes. The removal of the FBS from the medium and the provision of a defined medium with disclosed composition make mTeSR a superior study platform for hMSC biology in a controlled environment. Further, this provides a key step toward generating a clinical-grade medium for expansion of hMSCs for clinical applications that rely on osteo- and chondroinduction of MSCs, such as bone repair and cartilage generation.

Modulation of stem cell adhesion and morphology via facile control over surface presentation of cell adhesion molecules.

To encourage cell adhesion on biomaterial surfaces in a more facile, safe, and low-cost fashion, we have demonstrated a noncovalent approach to spatially conjugate β-cyclodextrin (β-CD) modified peptide sequences onto self-assembled adamantane-terminated polystyrene-b-poly(ethylene oxide) (PS-PEO-Ada) films through inclusion complexing interactions between β-CDs and adamantane. By simply blending various ratios of unmodified PS-PEO with a newly synthesized PS-PEO-Ada, we produced PS polymer films that displayed well-organized adamantine-decorated cylindrical PEO domains with varying average interdomain spacings ranging from 29 to 47 nm. The presence of the adamantane moiety at the terminal end of the PEO chain permitted rapid, and importantly, oriented attachment of β-CD functionalized peptides onto these surfaces. This one-step process not only converted these proven nonadherent PS-PEO surfaces into adherent surfaces, but also permitted precisely controlled presentation and surface distribution of the conjugated peptides. The utility of these surfaces as cell culture substrates was confirmed with human mesenchymal stem cells (hMSCs). We observed that with increasing PS-PEO-Ada content in the PEO cylindrical domains, these novel polymer films displayed improved cell attachment and spreading, with notable differences in hMSC morphology. We further confirmed that this novel PS-PEO-Ada surface provides a flexible platform for facile conjugation of mixtures of β-CDs functionalized with different peptides, specifically RGD and IKVAV peptides. The cell adhesion and spreading assays on these surfaces indicated that the morphologies of hMSCs can be easily manipulated, while no significant changes in cell attachment were observed. The lock-and-key peptide conjugation technique presented in this work is applicable to any substrate that incorporates a moiety capable of forming inclusion complexes with α-, β-, and γ-CDs, providing a facile and flexible method by which to construct peptide-conjugated biomaterial substrates for a multitude of applications in fields ranging from cell bioprocessing and regenerative medicine to cell-based assays.

Derivation of Mesenchymal Stromal Cells from Canine Induced Pluripotent Stem Cells by Inhibition of the TGFβ/Activin Signaling Pathway

In this study we have generated canine mesenchymal stromal cells (MSCs), also known as mesenchymal stem cells, from canine induced pluripotent stem cells (ciPSCs) by small-molecule inhibition of the transforming growth factor beta (TGFβ)/activin signaling pathway. These ciPSC-derived MSCs (ciPSC-MSCs) express the MSC markers CD73, CD90, CD105, STRO1, cPDGFRβ and cKDR, in addition to the pluripotency factors OCT4, NANOG and REX1. ciPSC-MSCs lack immunostaining for H3K27me3, suggesting that they possess two active X chromosomes. ciPSC-MSCs are highly proliferative and undergo robust differentiation along the osteo-, chondro- and adipogenic pathways, but do not form teratoma-like tissues in vitro. Of further significance for the translational potential of ciPSC-MSCs, we show that these cells can be encapsulated and maintained within injectable hydrogel matrices that, when functionalized with bound pentosan polysulfate, dramatically enhance chondrogenesis and inhibit osteogenesis. The ability to efficiently derive large numbers of highly proliferative canine MSCs from ciPSCs that can be incorporated into injectable, functionalized hydrogels that enhance their differentiation along a desired lineage constitutes an important milestone towards developing an effective MSC-based therapy for osteoarthritis in dogs, but equally provides a model system for assessing the efficacy and safety of analogous approaches for treating human degenerative joint diseases.

Mechanical properties and biocompatibility of porous titanium scaffolds for bone tissue engineering

Synthetic scaffolds are a highly promising new approach to replace both autografts and allografts to repair and remodel damaged bone tissue. Biocompatible porous titanium scaffold was manufactured through a powder metallurgy approach. Magnesium powder was used as space holder material which was compacted with titanium powder and removed during sintering. Evaluation of the porosity and mechanical properties showed a high level of compatibility with human cortical bone. Interconnectivity between pores is higher than 95% for porosity as low as 30%. The elastic moduli are 44.2GPa, 24.7GPa and 15.4GPa for 30%, 40% and 50% porosity samples which match well to that of natural bone (4-30GPa). The yield strengths for 30% and 40% porosity samples of 221.7MPa and 117MPa are superior to that of human cortical bone (130-180MPa). In-vitro cell culture tests on the scaffold samples using Human Mesenchymal Stem Cells (hMSCs) demonstrated their biocompatibility and indicated osseointegration potential. The scaffolds allowed cells to adhere and spread both on the surface and inside the pore structures. With increasing levels of porosity/interconnectivity, improved cell proliferation is obtained within the pores. It is concluded that samples with 30% porosity exhibit the best biocompatibility. The results suggest that porous titanium scaffolds generated using this manufacturing route have excellent potential for hard tissue engineering applications.

Concise Review: New Frontiers in MicroRNA-Based Tissue Regeneration

In recent years, the role of miRNAs in post‐transcriptional gene regulation has come to the fore with strong evidence to indicate an important role for microRNAs (miRNAs) in the regulation of a wide range of fundamental biological processes. Notably, this includes the regulation of both endogenous tissue repair mechanisms and the growth and differentiation of stem cells (both adult and pluripotent). As a result, manipulation of miRNA signaling holds great promise for regenerative medicine, which aims to harness either endogenous or implanted cells to promote tissue repair. However, to fully realize this potential, it will be necessary to combine advances in our biological understanding with new technologies that allow precise spatiotemporal modulation of specific miRNA candidates. In this review, we highlight the role of miRNAs in tissue regeneration, discuss key challenges in translating this knowledge to the clinic, and outline recent technological advances that aim to address these issues. By combining a comprehensive knowledge of miRNA biology with cutting‐edge delivery technologies, it is clear that miRNAs hold significant promise for tissue regenerative therapies in the future.

A synthetic elastomer based on acrylated polypropylene glycol triol with tunable modulus for tissue engineering applications

As strategies for manipulating cellular behaviour in vitro and in vivo become more sophisticated, synthetic biomaterial substrates capable of reproducing critical biochemical and biophysical properties (or cues) of tissue micro-environments will be required. Cytoskeletal tension has been shown to be highly deterministic of cell fate decisions, yet few synthetic biomaterials are capable of modulating cytoskeletal tension of adhered cells through variations in stiffness, at least in the ranges applicable to tissue properties (e.g., 1-100 kPa), whilst also possessing other required properties, such as biodegradability, biocompatibility and processability. In this paper we describe a non-cytotoxic polymer system based on acrylated polypropylene glycol triol (aPPGT). This new elastomer system has tunable elastic moduli, is degradable, can be easily surface modified and can be manufactured into porous three dimensional scaffolds or micropatterned substrates. We demonstrate that the PPGT substrates can modulate hMSC morphology, growth, and differentiation, and that they can produce similar outcomes as observed for a non-degradable polyacrylamide substrate, confirming their utility as a degradable elastomer for tissue engineering and other biomedical applications.