Ji Hoon Kwak

Delayed Intra-articular Inflammatory Reaction Due to Poly-L-Lactide Bioabsorbable Interference Screw Used in Anterior Cruciate Ligament Reconstruction

Bioabsorbable interference screws have replaced metal interference screws in anterior cruciate ligament reconstruction surgery because they have several advantages. Poly-L-lactide (PLLA) is one of the commonly used materials for bioabsorbable interference screws. PLLA produces a lower inflammatory reaction than polyglycolide as a result of its slower degradation rate and better biocompatibility. We describe a case of a delayed intra-articular inflammatory reaction caused by a PLLA bioabsorbable interference screw used in anterior cruciate ligament reconstruction.

Comparative Analysis of Femoral Tunnels Between Outside-In and Transtibial Double-Bundle Anterior Cruciate Ligament Reconstruction: A 3-Dimensional Computed Tomography Study

PURPOSE The objectives of this study were (1) to compare locations of the femoral tunnels created by outside-in and transtibial techniques and the reference data and (2) to compare the diameter of the tunnel entrance based on the real reaming size. METHODS A comparative study was performed with 20 outside-in and 22 transtibial double-bundle anterior cruciate ligament reconstruction patients. Computed tomography scans of the operated knees of the outside-in and transtibial groups were performed at 1.25 days (range, 1 to 3 days) and 2.7 weeks (range, 3 days to 4 weeks), respectively. Three-dimensional surface models were then produced. For all 3 plane data sets, the positions of the femoral tunnels were measured by an anatomic coordinate axis method. For comparison of the tunnel diameter at the entrance of tunnel, the difference between the real reaming and measured diameter was determined first on computed tomography images. Subsequently, the differences in the outside-in and transtibial techniques were compared. RESULTS In the comparison between outside-in and reference data, the posterior-anterior direction of the posterolateral (PL) tunnel showed an anterior position compared with reference data, even though it was positioned more posteriorly compared with that of the transtibial technique (P = .003). In the comparison between transtibial and reference data, the posterior-anterior direction of the anteromedial (AM) and PL tunnels showed an anterior position compared with reference data (P = .019 and P = .005, respectively). The transtibial technique showed significantly larger diameters in both AM and PL tunnels (P < .001 and P < .001, respectively). CONCLUSIONS The outside-in technique showed more accurate replication of the femoral tunnels than the transtibial technique, particularly the AM tunnel of the femur. The transtibial technique showed an ellipsoidal tunnel configuration at the entrance of the tunnel, which suggests that eccentric reaming is unavoidable because the reaming angle is determined by the tibial tunnel. LEVEL OF EVIDENCE Level III, retrospective comparative study.

Comparison of Complete Distal Release of the Medial Collateral Ligament and Medial Epicondylar Osteotomy during Ligament Balancing in Varus Knee Total Knee Arthroplasty

Background During ligament balancing for severe medial contracture in varus knee total knee arthroplasty (TKA), complete distal release of the medial collateral ligament (MCL) or a medial epicondylar osteotomy can be necessary if a large amount of correction is needed. Methods This study retrospectively reviewed 9 cases of complete distal release of the MCL and 11 cases of medial epicondylar osteotomy which were used to correct severe medial contracture. The mean follow-up periods were 46.5 months (range, 36 to 78 months) and 39.8 months (range, 32 to 65 months), respectively. Results There were no significant differences in the clinical results between the two groups. However, the valgus stress radiograph revealed significant differences in medial instability. In complete distal release of the MCL, some stability was obtained by repair and bracing but the medial instability could not be removed completely. Conclusions Medial epicondylar osteotomy for a varus deformity in TKA could provide constant medial stability and be a useful ligament balancing technique.

A Comparison of the Clinical and Radiographic Results of Press Fit Condylar Rotating-Platform High-Flexion and Low Contact Stress Mobile Bearing Prosthesis in Total Knee Arthroplasty: Short term Results.

Purpose This study compared the results of rotating-platform high-flexion (RP-F) total knee arthroplasty with low contact stress (LCS) for clinical and radiographical assessment after a short-term period. Materials and Methods 68 total knee arthroplasties using a RP-F and LCS system were analyzed retrospectively. Thirty-five of the 68 were osteoarthritic knees and were followed-up for more than 2 years. The clinical evaluation included range of motion (ROM), Knee Society Knee Score and Function Score (KSKS and KSFS), tailor position and kneeling. The radiographic evaluation included femorotibial angle, position of implants, radiolucent line and position of patella. Results The postoperative ROM, KSKS, and KSFS improved statistically in both implants. Comparing RP-F with LCS there were statistically no differences in ROM (p=0.863), KSKS (p=0.835), KSFS (p=0.535) and tailor position (p=0.489). There were no significant radiographic differences. Conclusions Total knee arthroplasty with RP-F and LCS showed similar clinical and radiographic results; it also showed excellent and predictable results at the short-term follow up. However, in RP-F there was 1 case of early osteolysis, 1 case of patella clunk syndrome and 1 case of painful patella crepitus; therefore, further case studies and follow-up are needed.

Foot drop secondary to peroneal intraneural cyst arising from tibiofibular joint

AbstractAn 11-year-old boy presented to our outpatient clinic with a three-month history of pain over the fibular head area and gait difficulty. Surgical exploration revealed a mass arising from the superior tibiofibular joint invading the peroneal nerve along the articular branch of the common peroneal nerve. The pathogenesis of the intraneural ganglion of the peroneal nerve may be an articular origin and superior tibiofibular joint is the central point. Level of evidence V.

Knee Arthrodesis in Failed Total Knee Arthroplasty With Severe Osteolysis and Ipsilateral Long-Stem Total Hip Arthroplasty

We report a case of knee fusion after a failed total knee arthroplasty (TKA) with severe osteolysis including the epicondyle and ipsilateral total hip arthroplasty (THA) with long Wagner revision stem (Sulzer Orthopedics, Baar, Switzerland). The conventional devices for arthrodesis were unavailable in this case because of the long Wagner revision stem and poor bone stock. A connector was made between the long Wagner revision stem and an intramedullary nail (IM nail; Solco, Seoul, Korea). The custom-made connector was coupled with a femoral stem by cylindrical taper fit with additional cement augmentation and an intramedullary nail by screws. Osseous fusion was achieved without pain or instability.

Comparative biomechanical study of the Ligament Plate® and other fixation devices in ACL reconstruction

The objective of this study was to evaluate and compare the biomechanical properties of the Ligament Plate® with other femoral fixation devices. The Ligament Plate® and three different femoral fixation devices were used in fixation of 60 porcine femora and harvested porcine tendons. For each fixation device, a porcine graft-tendon complex was used for the simple load-to-failure test and the load-to-failure test after a cyclic loading test, and the maximal failure load was measured. The amount of graft elongation and failure pattern after the cyclic loading test and load-to-failure test were evaluated. In the BioScrew® group, the mean maximal failure load in the load-to-failure test and load-to-failure test after a cyclic loading test was significantly lower and significant graft elongation was noted. There were no significant differences between the other groups. The Ligament Plate® provided adequate initial fixation power suitable for early rehabilitation.RésuméL’objectif de cette étude est d’évaluer et de comparer les propriétés biomécaniques du ligament plaque® avec d’autres systèmes de fixation fémorale. Matériel et méthode: le ligament plaque et différents matériels de fixation fémorale ont été utilisés dans le traitement des fractures fémorales chez le porc. Pour chaque matériel de fixation la greffe tendineuse de porc a été testée en charge jusqu’à la rupture avec élongation de la greffe et test cyclique de rupture en charge. Résultats: Dans le groupe Bioscrew les tests en charge sont moins bons, néanmoins, il n’y a pas de différence significative dans les deux groupes. En conclusion: le ligament Plaque permet d’avoir une bonne fixation initale et permet une réhabilitation précoce.

Utility of Preoperative Distractive Stress Radiograph for Beginners to Extent of Medial Release in Total Knee Arthroplasty

Background This study evaluated the preoperative distractive stress radiographs in order to quantify and predict the extent of medial release according to the degree of varus deformity in primary total knee arthroplasty. Methods We evaluated 120 varus, osteoarthritic knee joints (75 patients). The association of the angle on the distractive stress radiograph with extent of medial release was analyzed. The extent of medial release was classified into the following 4 groups according to the stage: release of the deep medial collateral ligament (group 1), release of the posterior oblique ligament and/or semimembranous tendon (group 2), release of the posterior capsule (group 3) and release of the superficial medial collateral ligament (group 4). Results The mean femorotibial angle on the preoperative distractive stress radiograph was valgus 2.4° (group 1), valgus 0.8° (group 2), varus 2.1° (group 3) and varus 2.7° (group 4). The extent of medial release increased with increasing degree of varus deformity seen on the preoperative distractive stress radiograph. Conclusions The preoperative distractive stress radiograph was useful for predicting the extent of medial release when performing primary total knee arthroplaty.

The Use of Medulloscopy for Localized Intramedullary Lesions: Review of 5 Cases

We report 5 cases of a localized lesion (4 with osteomyelitis and 1 with an intraosseous ganglion cyst) that were treated successfully by medulloscopy. Medulloscopy is a standard arthroscopic technique for visualizing the intramedullary canal of the tibia. Two portals were created to allow easy access and triangulation to the lesion, one for the 5-mm arthroscope and the other for the instrument. Debridement, irrigation, and resection of the sequestrum were performed for the cases with osteomyelitis, and the intraosseous ganglion cyst was treated with biopsy, debridement, and autogenous bone grafting. All cases were treated successfully with medulloscopy and did not show recurrence at the last follow-up. In addition, there were no complications related to the procedure.

Relationship between Tibial Bone Defect and Extent of Medial Release in Total Knee Arthroplasty

Purpose To understand the relationship between tibial bone defect and extent of medial release in total knee arthroplasty. Materials and Methods We evaluated 32 knees in 22 patients with variable degrees of tibial bone defect on medial plateau has undergone total knee arthroplasty. In this study, 31 cases had been diagnosed as degenerative osteoarthritis and 1 case was osteonecrosis. We excluded cases with infection, traumatic arthritis, or neuropathic joints. With regard to gender, 29 cases were female and 3 cases were male. The following relationships were analyzed: preoperative degrees of tibial bone defect and varus deformity; the femorotibial angle of both weight-bearing whole extremity radiogram, distractive stress radiogram, and the extent of medial release. Results Average tibial bone defect was 9.8±4.1 mm. Average femorotibial angle on weight-bearing whole extremity radiograph was varus 10.0°±6.2°. Average femorotibial angle on distractive stress radiograph was varus 0.7°±4.6°. Statistically the extent of medial release showed no significant relationship with the degree of tibial bone defect and femoro-tibial angle of whole extremity radiogram. However, it revealed a statistically significant relationship with the femorotibial angle on distractive radiogram (r=0.465, p=0.007). Conclusions Preoperative distractive stress radiograph might be a useful method to predict the extent of intraoperative medial release during total knee arthroplasty.