Jian-Hua Deng

Vapor–Solid Growth of Few-Layer Graphene Using Radio Frequency Sputtering Deposition and Its Application on Field Emission

The carbon nanotube (CNT) and graphene hybrid is an attractive candidate for field emission (FE) because of its unique properties, such as high conductivity, large aspect ratio of CNT, and numerous sharp edges of graphene. We report here a vapor-solid growth of few-layer graphene (FLG, less than 10 layers) on CNTs (FLG/CNT) and Si wafers using a radio frequency sputtering deposition system. Based on SEM, TEM, and Raman spectrum analyses, a defect nucleation mechanism of the FLG growth was proposed. The FE measurements indicate that the FLG/CNT hybrids have low turn-on (0.956 V/μm) and threshold fields (1.497 V/μm), large field enhancement factor (∼4398), and good stability. Excellent FE properties of the FLG/CNT hybrids make them attractive candidates as high-performance field emitters.

Synthesis of Ag ion-implanted TiO2 thin films for antibacterial application and photocatalytic performance

TiO2 thin films were deposited by spin coating method. Silver ions were implanted into the films using a Metal Vapor Vacuum Arc implanter. The antibacterial ability of implanted films was tested using Escherichia coli removal under fluorescent irradiation and in the dark. The concentration of E. coli was evaluated by plating technique. The photocatalytic efficiency of the implanted films was studied by degradation of methyl orange under fluorescent illumination. The surface free energy of the implanted TiO2 films was calculated by contact angle testing. Vitamin C was used as radical scavengers to explore the antibacterial mechanism of the films. The results supported the model that both generation of reactive oxygen species and release of silver ions played critical roles in the toxic effect of implanted films against E. coli. XPS experimental results demonstrated that a portion of the Ag(Ag(3+)) ions were doped into the crystalline lattice of TiO2. As demonstrated by density functional theory calculations, the impurity energy level of subtitutional Ag was responsible for enhanced absorption of visible light. Ag ion-implanted TiO2 films with excellent antibacterial efficiency against bacteria and decomposed ability against organic pollutants could be potent bactericidal surface in moist environment.

Fabrication and Properties of Ag-nanoparticles Embedded Amorphous Carbon Nanowire/CNT Heterostructures

Carbon nanotubes were subjected to doping with an energetic Ag ion beam, and the carbon nanotubes on the top of the array were transformed into amorphous carbon nanowires with embedded Ag-nanoparticles. The field emission characteristics of these nanowires were investigated. The minimum turn-on and threshold fields were 0.68 and 1.09 V/μm, respectively, which were lower than those of the as-grown carbon nanotubes. This was probably because Ag-nanoparticles embedded in the carbon nanowires reduced the effective work function from 4.59 to 4.23 eV. Large doping amounts produced serious structural damage at the top of the nanowires and impaired the field emission characteristics.

Field emission enhancement of Au-Si nano-particle-decorated silicon nanowires

Au-Si nano-particle-decorated silicon nanowire arrays have been fabricated by Au film deposition on silicon nanowire array substrates and then post-thermal annealing under hydrogen atmosphere. Field emission measurements illustrated that the turn-on fields of the non-annealed Au-coated SiNWs were 6.02 to 7.51 V/μm, higher than that of the as-grown silicon nanowires, which is about 5.01 V/μm. Meanwhile, after being annealed above 650°C, Au-Si nano-particles were synthesized on the top surface of the silicon nanowire arrays and the one-dimensional Au-Si nano-particle-decorated SiNWs had a much lower turn-on field, 1.95 V/μm. The results demonstrated that annealed composite silicon nanowire array-based electron field emitters may have great advantages over many other emitters.

Irradiation damage determined field emission of ion irradiated carbon nanotubes.

Figuring out the underlying relationship between the field emission (FE) properties and the ion irradiation induced structural change of carbon nanotubes (CNTs) is of great importance in developing high-performance field emitters. We report here the FE properties of Si and C ion irradiated CNTs with different irradiation doses. It is found that the FE performance of the ion irradiated CNTs ameliorates before and deteriorates after an irradiation-ion-species related dose. The improved FE properties are ascribed to the increased amount of defects, while the degraded FE performance is attributed to the great shape change of CNTs. These two structural changes are further characterized by a structural damage related parameter: dpa (displacement per atom), and the FE performance of the ion irradiated CNTs is surprisingly found to be mainly dependent on the dpa. The optimal dpa for FE of the ion irradiated CNTs is ∼0.60. We ascribe this to the low irradiation doses and the low substrate temperature that make the ion irradiation play a more important role in producing defects rather than element doping. Furthermore, the ion irradiated CNTs exhibit excellent FE stability, showing promising prospects in practical applications.

High current density and longtime stable field electron transfer from large-area densely arrayed graphene nanosheet-carbon nanotube hybrids.

Achieving high current and longtime stable field emission from large area (larger than 1 mm(2)), densely arrayed emitters is of great importance in applications for vacuum electron sources. We report here the preparation of graphene nanosheet-carbon nanotube (GNS-CNT) hybrids by following a process of iron ion prebombardment on Si wafers, catalyst-free growth of GNSs on CNTs, and high-temperature annealing. Structural observations indicate that the iron ion prebombardment influences the growth of CNTs quite limitedly, and the self-assembled GNSs sparsely distributed on the tips of CNTs with their sharp edges unfolded outside. The field emission study indicates that the maximum emission current density (Jmax) is gradually promoted after these treatments, and the composition with GNSs is helpful for decreasing the operation fields of CNTs. An optimal Jmax up to 85.10 mA/cm(2) is achieved from a 4.65 mm(2) GNS-CNT sample, far larger than 7.41 mA/cm(2) for the as-grown CNTs. This great increase of Jmax is ascribed to the reinforced adhesion of GNS-CNT hybrids to substrates. We propose a rough calculation and find that this adhesion is promoted by 7.37 times after the three-step processing. We consider that both the ion prebombardment produced rough surface and the wrapping of CNT foot by catalyst residuals during thermal processing are responsible for this enhanced adhesion. Furthermore, the three-step prepared GNS-CNT hybrids present excellent field emission stability at high emission current densities (larger than 20 mA/cm(2)) after being perfectly aged.

Effect of nitrogen atomic percentage on N + -bombarded MWCNTs in cytocompatibility and hemocompatibility

N+-bombarded multi-walled carbon nanotubes (N+-bombarded MWCNTs), with different nitrogen atomic percentages, were achieved by different N ion beam currents using ion beam-assisted deposition (IBAD) on MWCNTs synthesized by chemical vapor deposition (CVD). Characterizations of N+-bombarded MWCNTs were evaluated by X-ray photoelectron spectroscopy (XPS), transmission electron microscopy (TEM), Raman spectroscopy, and contact angle. For comparison, the in vitro cytocompatibility of the N+-bombarded MWCNTs with different N atomic percentages was assessed by cellular adhesion investigation using human endothelial cells (EAHY926) and mouse fibroblast cells (L929), respectively. The results showed that the presence of nitrogen in MWCNTs accelerated cell growth and proliferation of cell culture. The higher nitrogen content of N+-bombarded MWCNTs, the better cytocompatibility. In addition, N+-bombarded MWCNTs with higher N atomic percentage displayed lower platelet adhesion rate. No hemolysis can be observed on the surfaces. These results proved that higher N atomic percentage led N+-bombarded MWCNTs to better hemocompatibility.

Enhanced cell growth on 3D graphene scaffolds implanted with nitrogen ions

One of the key challenges in engineering tissues for cell-based therapies is developing biocompatible scaffold materials to direct cell behavior. In this paper, the cytocompatibilities of a flexible three-dimensional graphene scaffold (3D-G) and the same scaffold implanted with nitrogen ions (N+/3D-G) are compared using an in vitro assay based on 3(4,5-dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide. The N+/3D-G samples were prepared from low-temperature hydrothermally synthesized flexible 3D-G by ion implantation and were found to display improved adhesion and proliferation of rat osteoblast and mouse fibroblast cells. In particular, the N+/3D-G sample with a nitrogen content of ∼10% showed the highest levels of cell viability and proliferation. The flexible N+/3D-G has potential applications as a biocompatible scaffold material that provides improved surface area and hydrophilic groups for cell growth and proliferation.

Structures and field emission properties of silicon nanowires irradiated with energetic carbon ion beam

In this paper, the structures and field emission properties of energetic C ion irradiated SiNWs have been investigated and influence of ion irradiation on structures and properties has been discussed. Vertically SiNW arrays are synthesized by using Ag-assisted electroless-chemical etching at room temperature, as reported in literatures. The process mainly comprises three steps: 1) surface cleaning of polished silicon wafers; 2) immersion of the cleaned silicon wafers into HF-based aqueous solution containing silver nitrate to synthesize Ag catalyst; 3) chemical etching of the Ag catalyst-covered silicon wafers in HF-base aqueous solution containing oxidant (H2O2). After throughout above processes, SiNW arrays have been synthesized. Then, the samples are immersed in 50% HNO3 solution to dissolve Ag catalyst. The as-grown SiNWs are irradiated by energetic carbon ion with an average energy of 20 keV and various doses. FE-SEM, EDS and XPS are employed to characterize the morphology and chemical structures of samples. The field emission measurement is carried out in an ultrahigh vacuum chamber with a bi-diode system, in which the base pressure is lower than 3x10-7 Pa.

Enhanced electron field emission from carbon nanotubes irradiated by energetic C ions

In this paper, the investigation on the electron field emission enhancement from carbon nanotubes irradiated by energetic C ions are reported. Multiwalled carbon nanotube arrays (MW-CNTAs) are synthesized on (100) silicon substrates by a thermal chemical vapor deposition (TCVD) at 750°C for 30 min. In this procedure, a Fe thin film with a thickness of 5 nm is used as a catalyst, and the mixing of hydrogen and acetylene with a H2/C2H2 flow rate ratio of 3.3:1 is used as a reactive source. Energetic C ion irradiation is carried out by MEVVA ion implanter. The incidence angle of the ions is about 45°, and the average energy of C ions is about 40keV. The irradiation doses are 5.6x1016, 9.6x1016, 2.3x1017, 3.4x1017 and 5.6x1017 respectively. Scanning electron microscopy (SEM), transmission electron microscopy (TEM), X-ray photoelectron spectra (XPS) and Raman are used to characterize the structures of as-grown and the irradiated CNTs. Field emission measurement is carried out in a bipolar measurement equipment with a base pressure of 1x10-7Pa at room temperature.