Jiang-Yang Shao

Biscyclometalated ruthenium complexes bridged by 3,3',5,5'-tetrakis(N-methylbenzimidazol-2-yl)biphenyl: synthesis and spectroscopic and electronic coupling studies.

A series of biscyclometalated ruthenium complexes bridged by the title ligand were prepared by either an oxidative dimerization of corresponding monometallic complexes or treatment of the bridging ligand with Ru(L)Cl(3) (L = capping ligand). The electronic properties of these complexes were examined by electrochemical and spectroscopic analysis and DFT/TDDFT calculations. The degree of metal-metal electronic coupling of these complexes was estimated on the basis of intervalence charge-transfer transition analysis of corresponding mixed-valent complexes. These studies indicated that the electronic coupling was strongly dependent on the electronic nature of the terminal ligands. A hole-transfer superexchange mechanism was used to understand the underlying electron-transfer processes.

Oligotriarylamines with a pyrene core: a multicenter strategy for enhancing radical cation and dication stability and tuning spin distribution.

Monoamine 1, diamines 2-4, triamine 5, and tetraamine 6 have been synthesized by substituting dianisylamino groups at the 1-, 3-, 6-, and/or 8-positions of pyrene. Diamines 2-4 differ in the positions of the amine substituents. No pyrene-pyrene interactions are evident in the single-crystal packing of 3, 4, and 6. With increasing numbers of amine substituents, the first oxidation potential decreases progressively from the mono- to the tetraamine. These compounds show intense charge-transfer (CT) emission in CH2 Cl2 at around 530 nm with quantum yields of 48-68 %. Upon stepwise oxidation by electrolysis or chemical oxidation, these compounds were transformed into radical cations 1(⋅+) -6(⋅+) and dications 2(2+) -6(2+) , which feature strong visible and near-infrared absorptions. Time-dependent density functional theory studies suggested the presence of localized transitions from the pyrene radical cation and aminium radical cation, intervalence CT, and CT between the pyrene and amine moieties. Spectroscopic studies indicated that these radical cations and dications have good stability. Triamine 5 and tetraamine 6 formed efficient CT complexes with tetracyanoquinodimethane in solution. The results of EPR spectroscopy and density functional theory calculations suggested that the dications 2(2+) -4(2+) have a triplet ground state, whereas 5(2+) and 6(2+) have a singlet ground state. The dication of 1,3-disubstituted diamine 4 exhibits a strong EPR signal.

Transition from a Metal-Localized Mixed-Valence Compound to a Fully Delocalized and Bridge-Biased Electrophore in a Ruthenium-Amine-Ruthenium Tricenter System.

A series of cyclometalated diruthenium complexes with a redox-active amine bridge were synthesized. Depending on the terminal ligands of the ruthenium components and the substituent on the amine unit, the one-electron-oxidized state can be either in the form of a weakly or strongly coupled mixed-valence diruthenium complex, a fully charge-delocalized three-center system, or a bridge-biased electrophore. This transition among different electronic forms was supported by electrochemistry, near-infrared absorption, electron paramagnetic resonance, and density functional theory analysis.

Redox-responsive carbometalated ruthenium and osmium complexes

Organometallic conjugated complexes have become an important type of stimuli-responsive materials because of their appealing electrochemical properties and rich photonic, electronic, and magnetic properties. They are potentially useful in a wide range of applications such as molecular wires, molecular switches, molecular machines, molecular memory, and optoelectronic detections. This review outlines the recent progress on the molecular design of carbometalated ruthenium and osmium complexes and their applications as redox-responsive materials with visible and near-infrared (NIR) absorptions and electron paramagnetic resonance as readout signals. Three molecule systems are introduced, including the symmetric diruthenium complexes, metal-amine conjugated bi-center system, and multi-center redox-active organometallic compounds. Because of the presence of a metal-carbon bond on each metal component and strong electronic coupling between redox sites, these compounds display multiple reversible redox processes at low potentials and each redox state possesses significantly different physical and chemical properties. Using electrochemical potentials as input signals, these materials show reversible NIR absorption spectral changes, making them potentially useful in NIR electrochromism and information storage.

Amine-Amine Electronic Coupling through a Dibenzo[a,e]pentalene Bridge.

Three dibenzo[a,e]pentalene derivatives containing two redox-active amine substituents have been prepared. The degree of amine-amine electronic coupling through the dibenzo[a,e]pentalene bridge greatly depends on the substitution positions. Three monoamine compounds have been prepared for comparison studies. The experimental data and analysis were corroborated by time-dependent density functional theory results of mixed-valent compounds.

Multistate Redox Switching and Near-Infrared Electrochromism Based on a Star-Shaped Triruthenium Complex with a Triarylamine Core

A star-shaped cyclometalated triruthenium complex 2(PF6)n (n = 3 and 4) with a triarylamine core was synthesized, which functions as a molecular switch with five well-separated redox states in both solution and film states. The single-crystal X-ray structure of 2(PF6)3 is presented. This complex displays four consecutive one-electron redox waves at +0.082, +0.31, +0.74, and +1.07 V vs Ag/AgCl. In each redox state, it shows significantly different NIR absorptions with λmax of 1590 nm for 24+, 1400 nm for 25+, 1060 nm for 26+, and 740 nm for 27+, respectively. Complex 24+ shows a single-line EPR signal at g = 2.060, while other redox states are all EPR inactive. The spin density distributions and NIR absorptions in different redox states were rationalized by DFT and TDDFT calculations. A vinyl-substituted triruthenium analogous 3(PF6)4 was prepared, which was successfully polymerized on ITO glass electrode surfaces by reductive electropolymerization. The obtained poly-3n+/ITO film was characterized by FTIR, AFM, and SEM analysis. It shows four well-defined redox couples and reversible multistate NIR electrochromism. In particular, a contrast ratio (ΔT%) up to 63% was achieved at the optic telecommunication wavelength (1550 nm).

Cyclometalated ruthenium(II) complexes with bis(benzimidazolyl)benzene for dye-sensitized solar cells

A series of cyclometalated ruthenium complexes with bis(benzimidazolyl)benzene ligands were prepared and their applications in dye-sensitized solar cells are presented. The Ru(III/II) redox process of these complexes occurs at +0.71 V vs. Ag/AgCl. All complexes show broad absorptions extending into the near-infrared (NIR) region. The length of alkyl chains on the benzimidazole rings were found critical to the device performance. Sensitizer 4b with octyl substituents exhibits the best cell performance under the standard air mass 1.5 sunlight (η = 3.7%, Jsc = 9.85 mA cm−2, Voc = 555 mV, FF = 0.67). The device exhibits appreciable action in the NIR region between 700 and 850 nm.

Cyclometalated Osmium–Amine Electronic Communication through the p-Oligophenylene Wire

A series of bis-tridentate cyclometalated osmium complexes with a redox-active triarylamine substituent have been prepared, where the amine substituent is separated from the osmium ion by a p-oligophenylene wire of various lengths. X-ray crystallographic data of complexes 3(PF6) and 4(PF6) with three or four repeating phenyl units between the osmium ion and the amine substituent are presented. These complexes show two consecutive anodic redox couples between +0.1 and +0.9 V vs Ag/AgCl, with the potential splitting in the range of 300-390 mV. A combined experimental and theoretical study suggests that, in the one-electron-oxidized state, the odd electron is delocalized for short congeners and localized on the osmium component for long congeners. The electronic coupling parameter (Vab) was estimated by the Marcus-Hush analysis. The distance dependence plot of ln(Vab) versus the osmium-amine geometrical distance (Rab) gives a negative linear relationship with a decay slope of -0.19 Å(-1), which is slightly steeper with respect to the previously reported ruthenium-amine series with the same molecular wire. DFT calculations with the long-range-corrected UCAM-B3LYP functional gave more reasonable results for the osmium complexes with respect to those with UB3LYP.

Triarylamines with branched multi-pyridine groups: modulation of emission properties by structural variation, solvents, and tris(pentafluorophenyl)borane

Six triarylamine derivatives 1–6 with branched multi-pyridine substituents were prepared and characterized. These compounds are distinguished by the substituent on one of the phenyl group with NO2 for 1, CN for 2, Cl for 3, p-C6H4OMe for 4, OMe for 5, and NMe2 for 6, respectively. As revealed by single crystal X-ray analysis, these substituents play an important role in determining the configuration of the triarylamine framework and the crystal packing of 1–6. The emission properties of these compounds were examined in different solvents (toluene, CH2Cl2, acetone, tetrahydrofuran (THF), and N,N-dimethylformamide (DMF)) and in solid states. Distinct dual emissions from the localized emissive state and the intramolecular charge transfer state were observed for compound 5 in CH2Cl2. Compounds 1 and 6 show apparent aggregated enhanced emissions in acetone/H2O. The emission properties of these compounds were further modulated by the addition of tris(pentafluorophenyl)borane. In addition, density functional theory (DFT) and time-dependent DFT (TDDFT) calculations have been performed on the ground and singlet excited states to complement the experimental findings.

A Molecular Quadripod as a Noncovalent Interfacial Coupling Reagent for Forming Immobilized Coordination Assemblies

A pyrene-cored molecular quadripod 1,3,6,8-tetra(di( p-pyrid-4-ylphenyl)amino)pyrene (TAPyr) is presented as a noncovalent interfacial coupling reagent for the immobilization of coordination assemblies. This bench-stable molecule is readily available and has a quadripod shape with four pyridine legs and four pyridine handles on the top exterior. By a simple and short dipping procedure under ambient conditions, TAPyr is firmly immobilized on electrode surfaces in an upright fashion as probed by electrochemical, absorption spectral, atomic force microscopy, and scanning tunneling microscopy analysis. Using Pd(PhCN)2Cl2 as a metallolinker, 4-ferrocenylpyridine, a pyridine-terminated monoruthenium complex 1, and a diruthenium complex 2 with two pyridine ends have been grafted onto the ITO/TAPyr surface. The obtained thin films exhibit good electrochemical stability that is comparable or superior to those prepared by the state-of-the-art Si-O-Sn covalent functionalization. Appealing electrochromism is demonstrated with the thin films of ruthenium complexes on ITO.