Jiangfeng Zhou

Enhanced transmission due to antireflection coating layer at surface plasmon resonance wavelengths

We present experiments and analysis on enhanced transmission due to dielectric layer deposited on a metal film perforated with two-dimensional periodic array of subwavelength holes. The Si3N4 overlayer is applied on the perforated gold film (PGF) fabricated on GaAs substrate in order to boost the transmission of light at the surface plasmon polariton (SPP) resonance wavelengths in the mid- and long-wave IR regions, which is used as the antireflection (AR) coating layer between two dissimilar media (air and PGF/GaAs). It is experimentally shown that the transmission through the perforated gold film with 1.8 µm (2.0 µm) pitch at the first-order (second-order) SPP resonance wavelengths can be increased up to 83% (110%) by using a 750 nm (550 nm) thick Si3N4 layer. The SPP resonance leads to a dispersive resonant effective permeability (μeff ≠ 1) and thereby the refractive index matching condition for the conventional AR coating on the surface of a dielectric material cannot be applied to the resonant PGF structure. We develop and demonstrate the concept of AR condition based on the effective parameters of PGF. In addition, the maximum transmission (zero reflection) condition is analyzed numerically by using a three-layer model and a transfer matrix method is employed to determine the total reflection and transmission. The numerically calculated total reflection agrees very well with the reflection obtained by 3D full electromagnetic simulations of the entire structure. Destructive interference conditions for amplitude and phase to get zero reflection are well satisfied.

Analysis of subwavelength metal hole array structure for the enhancement of back-illuminated quantum dot infrared photodetectors

This paper is focused on analyzing the impact of a two-dimensional metal hole array structure integrated to the back-illuminated quantum dots-in-a-well (DWELL) infrared photodetectors. The metal hole array consisting of subwavelength-circular holes penetrating gold layer (2D-Au-CHA) provides the enhanced responsivity of DWELL infrared photodetector at certain wavelengths. The performance of 2D-Au-CHA is investigated by calculating the absorption of active layer in the DWELL structure using a finite integration technique. Simulation results show that the performance of the DWELL focal plane array (FPA) is improved by enhancing the coupling to active layer via local field engineering resulting from a surface plasmon polariton mode and a guided Fabry-Perot mode. Simulation method accomplished in this paper provides a generalized approach to optimize the design of any type of couplers integrated to infrared photodetectors. Experimental results demonstrate the enhanced signal-to-noise ratio by the 2D-Au-CHA integrated FPA as compared to the DWELL FPA. A comparison between the experiment and the simulation shows a good agreement.

Metamaterial Perfect Absorber Analyzed by a Meta-cavity Model Consisting of Multilayer Metasurfaces

We demonstrate that the metamaterial perfect absorber behaves as a meta-cavity bounded between a resonant metasurface and a metallic thin-film reflector. The perfect absorption is achieved by the Fabry-Perot cavity resonance via multiple reflections between the “quasi-open” boundary of resonator and the “close” boundary of reflector. The characteristic features including angle independence, ultra-thin thickness and strong field localization can be well explained by this meta-cavity model. With this model, metamaterial perfect absorber can be redefined as a meta-cavity exhibiting high Q-factor, strong field enhancement and extremely high photonic density of states, thereby promising novel applications for high performance sensor, infrared photodetector and cavity quantum electrodynamics devices.

Thin InSb layers with metallic gratings: a novel platform for spectrally-selective THz plasmonic sensing.

We present a computational study of terahertz optical properties of a grating-coupled plasmonic structure based on micrometer-thin InSb layers. We find two strong absorption resonances that we interpret as standing surface plasmon modes and investigate their dispersion relations, dependence on InSb thickness, and the spatial distribution of the electric field. The observed surface plasmon modes are well described by a simple theory of the air/InSb/air tri-layer. The plasmonic response of the grating/InSb structure is highly sensitive to the dielectric environment and the presence of an analyte (e.g., lactose) at the InSb interface, which is promising for terahertz plasmonic sensor applications. We determine the sensor sensitivity to be 7200 nm per refractive index unit (or 0.06 THz per refractive index unit). The lower surface plasmon mode also exhibits a splitting when tuned in resonance with the vibrational mode of lactose at 1.37 THz. We propose that such interaction between surface plasmon and vibrational modes can be used as the basis for a new sensing modality that allows the detection of terahertz vibrational fingerprints of an analyte.

A Low-loss Metasurface Antireflection Coating on Dispersive Surface Plasmon Structure

Over the years, there has been increasing interest in the integration of metal hole array (MHA) with optoelectronic devices, as a result of enhanced coupling of incident light into the active layer of devices via surface plasmon polariton (SPP) resonances. However, not all incident light contributes to the SPP resonances due to significant reflection loss at the interface between incident medium and MHA. Conventional thin-film antireflection (AR) coating typically does not work well due to non-existing material satisfying the AR condition with strong dispersion of MHA’s effective impedances. We demonstrate a single-layer metasurface AR coating that completely eliminates the refection and significantly increases the transmission at the SPP resonances. Operating at off-resonance wavelengths, the metasurface exhibits extremely low loss and does not show resonant coupling with the MHA layer. The SPP resonance wavelengths of MHA layer are unaffected whereas the surface wave is significantly increased, thereby paving the way for improved performance of optoelectronic devices. With an improved retrieval method, the metasurface is proved to exhibit a high effective permittivity () and extremely low loss (tan δ ~ 0.005). A classical thin-film AR coating mechanism is identified through analytical derivations and numerical simulations.

Angle-Dependent Spoof Surface Plasmons in Metallic Hole Arrays at Terahertz Frequencies

We demonstrate the angle dependence of spoof surface plasmon on metallic hole arrays in terahertz regime. By varying polar angle and azimuthal angle, we have observed frequency shifting and splitting of resonance modes. The amplitude of extraordinary optical transmission also shows angle dependence and exhibits mirror-image or translational symmetries.

Planar composite chiral metamaterial with broadband dispersionless polarization rotation and high transmission

We propose a planar composite chiral metamaterial (CCMM) by symmetrically inserting a metallic mesh between two layers of conjugated gammadion resonators. As the elaborate CCMM operates at off-resonance frequencies, it therefore presents low-loss and low-dispersion polarization rotation features. The results show that the proposed CCMM can achieve pure and dispersionless polarization rotation with efficient transmission for a linearly polarized wave within a broad bandwidth. This off-resonance CCMM overcomes the drawbacks of high transmission losses and highly dispersive polarization rotation that exist in the previous resonance-type chiral metamaterials and also exhibits more simplicity of fabrication than the three-dimensional CMMs. The intriguing properties greatly improve the performance of chiral metamaterials in controlling the polarization state of electromagnetic waves.

Fabry-Perot cavity resonance enabling highly polarization-sensitive double-layer gold grating

We present experimental and theoretical investigations on the polarization properties of a single- and a double-layer gold (Au) grating, serving as a wire grid polarizer. Two layers of Au gratings form a cavity that effectively modulates the transmission and reflection of linearly polarized light. Theoretical calculations based on a transfer matrix method reveals that the double-layer Au grating structure creates an optical cavity exhibiting Fabry-Perot (FP) resonance modes. As compared to a single-layer grating, the FP cavity resonance modes of the double-layer grating significantly enhance the transmission of the transverse magnetic (TM) mode, while suppressing the transmission of the transverse electric (TE) mode. As a result, the extinction ratio of TM to TE transmission for the double-layer grating structure is improved by a factor of approximately 8 in the mid-wave infrared region of 3.4–6 μm. Furthermore, excellent infrared imagery is obtained with over a 600% increase in the ratio of the TM-output voltage (Vθ = 0°) to TE-output voltage (Vθ = 90°). This double-layer Au grating structure has great potential for use in polarimetric imaging applications due to its superior ability to resolve linear polarization signatures.

Broadband angle- and permittivity-insensitive nondispersive optical activity based on planar chiral metamaterials

Because of the strong inherent resonances, the giant optical activity obtained via chiral metamaterials generally suffers from high dispersion, which has been a big stumbling block to broadband applications. In this paper, we propose a type of planar chiral metamaterial consisting of interconnected metal helix slat structures with four-fold symmetry, which exhibits nonresonant Drude-like response and can therefore avoid the highly dispersive optical activity resulting from resonances. It shows that the well-designed chiral metamaterial can achieve nondispersive and pure optical activity with high transmittance in a broadband frequency range. And the optical activity of multi-layer chiral metamaterials is proportional to the layer numbers of single-layer chiral metamaterial. Most remarkably, the broadband behaviors of nondispersive optical activity and high transmission are insensitive to the incident angles of electromagnetic waves and permittivity of dielectric substrate, thereby enabling more flexibility in polarization manipulation.

Grating-coupled surface plasmons on InSb: a versatile platform for terahertz plasmonic sensing (Conference Presentation)

Detection and identification of molecular materials based on their THz frequency vibrational resonances remains an open technological challenge. The need for such technology is illustrated by its potential uses in explosives detection (e.g., RDX) or identification of large biomolecules based on their THz-frequency vibrational fingerprints. The prevailing approaches to THz sensing often rely on a form of waveguide spectroscopy, either utilizing geometric waveguides, such as metallic parallel plate, or plasmonic waveguides made of structured metallic surfaces with sub-wavelength corrugation. The sensitivity of waveguide-based sensing devices is derived from the long (1 cm or longer) propagation and interaction distance of the THz wave with the analyte. We have demonstrated that thin InSb layers with metallic gratings can support high quality factor “true” surface plasmon (SP) resonances that can be used for THz plasmonic sensing. We find two strong SP absorption resonances in normal-incidence transmission and investigate their dispersion relations, dependence on InSb thickness, and the spatial distribution of the electric field. The sensitivity of this approach relies on the frequency shift of the SP resonance when the dielectric function changes in the immediate vicinity of the sensor, in the region of deeply sub-wavelength thickness. Our computational modeling indicates that the sensor sensitivity can exceed 0.25 THz per refractive index unit. One of the SP resonances also exhibits a splitting when tuned in resonance with a vibrational mode of an analyte, which could lead to new sensing modalities for the detection of THz vibrational features of the analyte.