Jianhua Du

Functional kaolinite supported Fe/Ni nanoparticles for simultaneous catalytic remediation of mixed contaminants (lead and nitrate) from wastewater

Kaolinite supported bimetallic Fe/Ni nanoparticles (K-Fe/Ni) demonstrated capacity for simultaneous removal of both cationic and anionic contaminants such as Pb (II) and NO3(-). The dispersion of Fe/Ni nanoparticles was improved when kaolinite was used as a stabilizer, and also enhanced the reactivity of K-Fe/Ni. The adsorption of Pb (II) onto the kaolinite and the consequent simultaneous catalytic reduction of Pb (II) and NO3(-) kaolinite were confirmed by SEM, BET, EDS, XRD and batch adsorption-reduction test. Orthogonal method showed that initial concentrations of Pb (II) and NO3(-), as well the dosage of K-Fe/Ni showed the most significant impact on the removal rates, where 86.3% of Pb (II) and 73.6% of NO3(-) was removed at optimized conditions. In addition, K-Fe/Ni could be stored for 15 days in dry air without losing reactivity. Reusability test of K-Fe/Ni indicated that the removal efficiency decreased by 12.5% for Pb (II) and 27.2% for NO3(-) after using 3 times successively. Two electroplating wastewater samples were tested and showed K-Fe/Ni could remove more than 96% of Pb (II) and NO3(-) under the optimized conditions.

Observation of gaseous films at solid–liquid interfaces: Removal by ultrasonic action

The critical role of dissolved gas nano-bubbles at solid surfaces in particle association, aggregation, adsorption and flotation has been recognised in the recent literature. The principles of mineral processing, fine particle separation, and water recovery depend upon changing the surface properties at the solid-liquid interface. It has been assumed that the solid surfaces are either in direct contact with the liquid or may have nano-bubbles attached only at hydrophobic surfaces. This paper shows that gaseous layers 50-100 nm thick can be attached surrounding high proportions of solid clay mineral surfaces restricting reagent access, producing buoyancy and aggregation. Ultrasonic treatment before flocculant addition effectively removes these gaseous layers as well as dispersed micro-bubbles. Re-aggregation after brief ultrasonication produces denser (less buoyant) flocs, demonstrated with cryo-SEM statistical analysis, giving more complete access of the flocculant to the aggregate surfaces. In the subsequent flocculant addition, the settling rates of the denser flocs can be increased up to 40%. If ultrasonic action is continued, the bridged flocs are disturbed with some redispersion of smaller flocs and individual platelets and consequent slower settling rates.

Effects of thermal treatments on the characterisation and utilisation of red mud with sawdust additive.

Extremely large amounts of red mud (bauxite residue) are generated globally every year from alumina refining industries, which are being disposed of on engineered landfills. The objective of this study is to investigate the effects of thermal treatments on red mud for development of utilisation strategies. Thermal treatments of red mud samples and their characterisations were investigated under inert (N2) and oxidative (air) conditions with and without sawdust addition at 200–600°C. After calcination, the resulting samples were analysed using thermogravimetric–infrared spectroscopy (TG-IR) for functional group transformations, thermogravimetric analysis (TGA) for thermal loss profiles and X-ray diffraction (XRD) for mineral transformations. The characterisation results showed that in N2 environment, boehmite in red mud was transferred to transition alumina at around 400°C while losing water from structural components. The addition of sawdust for incubation and calcination of red mud in air increased the surface area, whereas that in nitrogen atmosphere lead to reduction of hematite to magnetite at around 500°C. The incorporated carbon materials played a major role in increasing the surface area especially for pore size less than 2.5 nm. This treated red mud with altered mineral composition and improved properties for binding contaminants can be used for environmental remediation and in the process of metal recovery such as iron.

Novel Bacillus cereus strain from electrokinetically remediated saline soil towards the remediation of crude oil

A new strain SWH-15 was successfully isolated after initial electrokinetic remediation experiment using the same saline soil sampled from Shengli Oilfield, China. Four methods (morphological and biochemical characteristics, whole-cell fatty acid methyl esters (FAMEs) analysis, 16S rRNA sequence analysis and DNA G + C content and DNA–DNA hybridization analysis) were used to identify the taxonomic status of SWH-15 and confirmed that SWH-15 was a novel species of the Bacillus (B.) cereus group. Then, we assessed the degrading ability of the novel strain SWH-15 to crude oil through a microcosm experiment with four treatments, including control (CK), bioremediation using SWH-15 (Bio), electrokinetic remediation (EK), and combined bioremediation and electrokinetic remediation (Bio + EK). The results showed that the Bio + EK combined remediation treatment was more effective than the CK, Bio, and EK treatments in degrading crude oil contaminants. Bioaugmentation, by addition of the strain SWH-15 had synergistic effect with EK in Bio + EK treatment. Bacterial community analysis showed that electrokinetic remediation alone significantly altered the bacterial community of the saline soil. The addition of the strain SWH-15 alone had a weak effect on the bacterial community. However, the strain SWH-15 boosted the growth of other bacterial species in the metabolic network and weakened the impact of electrical field on the whole bacterial community structure in the Bio + EK treatment.

Bioavailability and risk estimation of heavy metal(loid)s in chromated copper arsenate treated timber after remediation for utilisation as garden materials

There is increasing concern about the use of chromated copper arsenate (CCA) treated timber due to the possible leaching of toxic metals or metalloids. CCA-treated timber waste are currently stockpiled across Australia with limited information about their risks to the environment or human health. In this study, the treatment and utilisation of CCA-treated timber waste as garden mulch, garden retaining walls, and soil additive were investigated. Iron materials were used as immobilising agents. The bioavailability of Cr, Cu and As to Spinacia oleracea from CCA-treated timber, before and after treatment, was determined in the context of human health risk assessment. The results showed that the iron-based treatments resulted in significant decreases in the concentrations of Cu and As in spinach grown in CCA-treated timber in soil. Analyses of CCA derived Cu and As in spinach showed that they accumulated in the roots rather than in the leaves. The risks of toxicity to humans varied for different utilisation scenarios and the immobilisation amendments were shown to reduce carcinogenic and non-carcinogenic risks. The information obtained in this study can inform development of utilisation options for CCA-treated timber wastes.