Jianshi Tang

Magnetization switching through giant spin–orbit torque in a magnetically doped topological insulator heterostructure

Recent demonstrations of magnetization switching induced by in-plane current in heavy metal/ferromagnetic heterostructures (HMFHs) have drawn great attention to spin torques arising from large spin-orbit coupling (SOC). Given the intrinsic strong SOC, topological insulators (TIs) are expected to be promising candidates for exploring spin-orbit torque (SOT)-related physics. Here we demonstrate experimentally the magnetization switching through giant SOT induced by an in-plane current in a chromium-doped TI bilayer heterostructure. The critical current density required for switching is below 8.9 × 10(4) A cm(-2) at 1.9 K. Moreover, the SOT is calibrated by measuring the effective spin-orbit field using second-harmonic methods. The effective field to current ratio and the spin-Hall angle tangent are almost three orders of magnitude larger than those reported for HMFHs. The giant SOT and efficient current-induced magnetization switching exhibited by the bilayer heterostructure may lead to innovative spintronics applications such as ultralow power dissipation memory and logic devices.

Switching of perpendicular magnetization by spin-orbit torques in the absence of external magnetic fields

Magnetization switching by current-induced spin-orbit torques is of great interest due to its potential applications in ultralow-power memory and logic devices. The switching of ferromagnets with perpendicular magnetization is of particular technological relevance. However, in such materials, the presence of an in-plane external magnetic field is typically required to assist spin-orbit torque-driven switching and this is an obstacle for practical applications. Here, we report the switching of out-of-plane magnetized Ta/Co(20)Fe(60)B(20)/TaO(x) structures by spin-orbit torques driven by in-plane currents, without the need for any external magnetic fields. This is achieved by introducing a lateral structural asymmetry into our devices, which gives rise to a new field-like spin-orbit torque when in-plane current flows in these structures. The direction of the current-induced effective field corresponding to this field-like spin-orbit torque is out-of-plane, facilitating the switching of perpendicular magnets.

Enhanced Charge Carrier Mobility in Two-Dimensional High Dielectric Molybdenum Oxide

We demonstrate that the energy bandgap of layered, high-dielectric α-MoO(3) can be reduced to values viable for the fabrication of 2D electronic devices. This is achieved through embedding Coulomb charges within the high dielectric media, advantageously limiting charge scattering. As a result, devices with α-MoO(3) of ∼11 nm thickness and carrier mobilities larger than 1100 cm(2) V(-1) s(-1) are obtained.

Carbon nanotube/polyaniline composite nanofibers: facile synthesis and chemosensors.

An initiator is applied to synthesize single-walled carbon nanotube/polyaniline composite nanofibers for use as high-performance chemosensors. The composite nanofibers possess widely tunable conductivities (10(-4) to 10(2) S/cm) with up to 5.0 wt % single-walled carbon nanotube (SWCNT) loadings. Chemosensors fabricated from the composite nanofibers synthesized with a 1.0 wt % SWCNT loading respond much more rapidly to low concentrations (100 ppb) of HCl and NH(3) vapors compared to polyaniline nanofibers alone (120 s vs 1000 s). These nanofibrillar SWCNT/polyaniline composite nanostructures are promising materials for use as low-cost disposable sensors and as electrodes due to their widely tunable conductivities.

Scale-invariant quantum anomalous Hall effect in magnetic topological insulators beyond the two-dimensional limit.

We investigate the quantum anomalous Hall effect (QAHE) and related chiral transport in the millimeter-size (Cr(0.12)Bi(0.26)Sb(0.62))₂Te₃ films. With high sample quality and robust magnetism at low temperatures, the quantized Hall conductance of e²/h is found to persist even when the film thickness is beyond the two-dimensional (2D) hybridization limit. Meanwhile, the Chern insulator-featured chiral edge conduction is manifested by the nonlocal transport measurements. In contrast to the 2D hybridized thin film, an additional weakly field-dependent longitudinal resistance is observed in the ten-quintuple-layer film, suggesting the influence of the film thickness on the dissipative edge channel in the QAHE regime. The extension of the QAHE into the three-dimensional thickness region addresses the universality of this quantum transport phenomenon and motivates the exploration of new QAHE phases with tunable Chern numbers. In addition, the observation of scale-invariant dissipationless chiral propagation on a macroscopic scale makes a major stride towards ideal low-power interconnect applications.

Gate-Controlled Surface Conduction in Na-Doped Bi2Te3 Topological Insulator Nanoplates

Exploring exciting and exotic physics, scientists are pursuing practical device applications for topological insulators. The Dirac-like surface states in topological insulators are protected by the time-reversal symmetry, which naturally forbids backscattering events during the carrier transport process, and therefore offers promising applications in dissipationless spintronic devices. Although considerable efforts have been devoted to controlling their surface conduction, limited work has been focused on tuning surface states and bulk carriers in Bi(2)Te(3) nanostructures by external field. Here we report gate-tunable surface conduction in Na-doped Bi(2)Te(3) topological insulator nanoplates. Significantly, by applying external gate voltages, such topological insulators can be tuned from p-type to n-type. Our results render a promise in finding novel topological insulators with enhanced surface states.

End-bonded contacts for carbon nanotube transistors with low, size-independent resistance

Making better small contacts Semiconducting single-walled carbon nanotubes have potential size and conductivity advantages over silicon for making smaller transistors. However, as metal electrical contacts decrease in size, the associated resistance increases to impractical values. Cao et al. reacted molybdenum films with semiconducting carbon nanotubes to create a carbide contact. The resistance of these contacts remained low even for 10-nm-scale contacts. Science, this issue p. 68 A covalent contact formed by the reaction of molybdenum and semiconducting carbon nanotubes has no Schottky barrier. Moving beyond the limits of silicon transistors requires both a high-performance channel and high-quality electrical contacts. Carbon nanotubes provide high-performance channels below 10 nanometers, but as with silicon, the increase in contact resistance with decreasing size becomes a major performance roadblock. We report a single-walled carbon nanotube (SWNT) transistor technology with an end-bonded contact scheme that leads to size-independent contact resistance to overcome the scaling limits of conventional side-bonded or planar contact schemes. A high-performance SWNT transistor was fabricated with a sub–10-nanometer contact length, showing a device resistance below 36 kilohms and on-current above 15 microampere per tube. The p-type end-bonded contact, formed through the reaction of molybdenum with the SWNT to form carbide, also exhibited no Schottky barrier. This strategy promises high-performance SWNT transistors, enabling future ultimately scaled device technologies.

Electrical Detection of Spin-Polarized Surface States Conduction in (Bi0.53Sb0.47)2Te3 Topological Insulator

Strong spin-orbit interaction and time-reversal symmetry in topological insulators enable the spin-momentum locking for the helical surface states. To date, however, there has been little report of direct electrical spin injection/detection in topological insulator. In this Letter, we report the electrical detection of spin-polarized surface states conduction using a Co/Al2O3 ferromagnetic tunneling contact in which the compound topological insulator (Bi0.53Sb0.47)2Te3 was used to achieve low bulk carrier density. Resistance (voltage) hysteresis with the amplitude up to about 10 Ω was observed when sweeping the magnetic field to change the relative orientation between the Co electrode magnetization and the spin polarization of surface states. The two resistance states were reversible by changing the electric current direction, affirming the spin-momentum locking in the topological surface states. Angle-dependent measurement was also performed to further confirm that the abrupt change in the voltage (resistance) was associated with the magnetization switching of the Co electrode. The spin voltage amplitude was quantitatively analyzed to yield an effective spin polarization of 1.02% for the surface states conduction in (Bi0.53Sb0.47)2Te3. Our results show a direct evidence of spin polarization in the topological surface states conduction. It might open up great opportunities to explore energy-efficient spintronic devices based on topological insulators.

Vertical graphene-base hot-electron transistor.

We demonstrate vertical graphene-base hot-electron transistors (GB-HETs) with a variety of structures and material parameters. Our GB-HETs exhibit a current saturation with a high current on-off ratio (>10(5)), which results from both the vertical transport of hot electrons across the ultrathin graphene base and the filtering of hot electrons through a built-in energy barrier. The influences of the materials and their thicknesses used for the tunneling and filtering barriers on the common-base current gain α are studied. The optimization of the SiO2 thickness and using HfO2 as the filtering barrier significantly improves the common-base current gain α by more than 2 orders of magnitude. The results demonstrate that GB-HETs have a great potential for high-frequency, high-speed, and high-density integrated circuits.

Proximity Induced High-Temperature Magnetic Order in Topological Insulator - Ferrimagnetic Insulator Heterostructure

Introducing magnetic order in a topological insulator (TI) breaks time-reversal symmetry of the surface states and can thus yield a variety of interesting physics and promises for novel spintronic devices. To date, however, magnetic effects in TIs have been demonstrated only at temperatures far below those needed for practical applications. In this work, we study the magnetic properties of Bi2Se3 surface states (SS) in the proximity of a high Tc ferrimagnetic insulator (FMI), yttrium iron garnet (YIG or Y3Fe5O12). Proximity-induced butterfly and square-shaped magnetoresistance loops are observed by magneto-transport measurements with out-of-plane and in-plane fields, respectively, and can be correlated with the magnetization of the YIG substrate. More importantly, a magnetic signal from the Bi2Se3 up to 130 K is clearly observed by magneto-optical Kerr effect measurements. Our results demonstrate the proximity-induced TI magnetism at higher temperatures, an important step toward room-temperature application of TI-based spintronic devices.