Jichuan Qiu

Self-Powered Electrical Stimulation for Enhancing Neural Differentiation of Mesenchymal Stem Cells on Graphene–Poly(3,4-ethylenedioxythiophene) Hybrid Microfibers

Engineered conductive scaffolds toward neural regeneration should have the ability to regulate mesenchymal stems cell (MSC) differentiation into neural lineage through an electrical stimulation-assisted culture process. In this work, a self-powered electrical stimulation-assisted neural differentiation system for MSCs was realized by combining a high effective triboelectric nanogenerator (TENG) to supply pulsed electric simulation signals and a poly(3,4-ethylenedioxythiophene) (PEDOT)-reduced graphene oxide (rGO) hybrid microfiber (80 μm in diameter) as a scaffold. The conductive PEDOT endows the rGO-PEDOT hybrid microfiber with an enhanced electrical conductivity and maintains a good cytocompatibility. MSCs cultured on this highly conductive rGO-PEDOT hybrid microfiber possess enhanced proliferation ability and good neural differentiation tendency. Importantly, by inducing electric pulses generated by the TENG as the electrical stimulation signal, which are triggered by human walking steps, neural differentiation of MSCs is dramatically improved. This study illustrates the customizability of the rGO-PEDOT hybrid microfiber for neural tissue engineering scaffolding applications, underlines the potential of a self-powered TENG electrical stimulation system for accelerating MSC differentiation into neural cells without bio/chemical cues, and suggests the TENGs practical use as a wearable stimulation system to assist nerve regeneration for a walking person.

Biopolymer/Calcium phosphate scaffolds for bone tissue engineering.

With nearly 30 years of progress, tissue engineering has shown promise in developing solutions for tissue repair and regeneration. Scaffolds, together with cells and growth factors, are key components of this development. Recently, an increasing number of studies have reported on the design and fabrication of scaffolding materials. In particular, inspired by the nature of bone, polymer/ceramic composite scaffolds have been studied extensively. The purpose of this paper is to review the recent progress of the naturally derived biopolymers and the methods applied to generate biomimetic biopolymer/calcium phosphate composites as well as their biomedical applications in bone tissue engineering.

Fluorescent graphene quantum dots as traceable, pH-sensitive drug delivery systems.

Graphene quantum dots (GQDs) were rationally fabricated as a traceable drug delivery system for the targeted, pH-sensitive delivery of a chemotherapeutic drug into cancer cells. The GQDs served as fluorescent carriers for a well-known anticancer drug, doxorubicin (Dox). The whole system has the capacity for simultaneous tracking of the carrier and of drug release. Dox release is triggered upon acidification of the intracellular vesicles, where the carriers are located after their uptake by cancer cells. Further functionalization of the loaded carriers with targeting moieties such as arginine-glycine-aspartic acid (RGD) peptides enhanced their uptake by cancer cells. DU-145 and PC-3 human prostate cancer cell lines were used to evaluate the anticancer ability of Dox-loaded RGD-modified GQDs (Dox-RGD-GQDs). The results demonstrated the feasibility of using GQDs as traceable drug delivery systems with the ability for the pH-triggered delivery of drugs into target cells.

Microenvironment-Driven Bioelimination of Magnetoplasmonic Nanoassemblies and Their Multimodal Imaging-Guided Tumor Photothermal Therapy

Biocompatibility and bioelimination are basic requirements for systematically administered nanomaterials for biomedical purposes. Gold-based plasmonic nanomaterials have shown potential applications in photothermal cancer therapy. However, their inability to biodegrade has impeded practical biomedical application. In this study, a kind of bioeliminable magnetoplasmonic nanoassembly (MPNA), assembled from an Fe3O4 nanocluster and gold nanoshell, was elaborately designed for computed tomography, photoacoustic tomography, and magnetic resonance trimodal imaging-guided tumor photothermal therapy. A single dose of photothermal therapy under near-infrared light induced a complete tumor regression in mice. Importantly, MPNAs could respond to the local microenvironment with acidic pH and enzymes where they accumulated including tumors, liver, spleen, etc., collapse into small molecules and discrete nanoparticles, and finally be cleared from the body. With the bioelimination ability from the body, a high dose of 400 mg kg(-1) MPNAs had good biocompatibility. The MPNAs for cancer theranostics pave a way toward biodegradable bio-nanomaterials for biomedical applications.

Graphene oxide-reinforced biodegradable genipin-cross-linked chitosan fluorescent biocomposite film and its cytocompatibility

A genipin-cross-linked chitosan/graphene oxide (GCS/GO) composite film was prepared using a solution casting method. Fourier transform infrared (FTIR) and ultraviolet-visible (UV-Vis) spectroscopy of the composite films showed that the interactions between the CS and oxygen-containing groups of GO resulted in good dispersion of the GO sheets in the CS network. The addition of GO decreased the expansion ratio of the composite films in physiological conditions and increased the resistance to degradation by lysozymes in vitro. As well, the tensile strength values of the GCS/GO films were significantly increased with the increasing load of GO. Moreover, the GCS/GO composite film also maintained the intrinsic fluorescence of GCS. The in vitro cell study results revealed that the composite films were suitable for the proliferation and adhesion of mouse preosteoblast (MC3T3-E1) cells. The GCS/GO biocomposite films might have a potential use in tissue engineering, bioimaging, and drug delivery.

Carbodiimide crosslinked collagen from porcine dermal matrix for high-strength tissue engineering scaffold.

Naturally-derived collagens for tissue engineering are limited by low mechanical strength and rapid degradation. In this study, carbodiimide is used to chemically modify the collagen derived from porcine acellular dermal matrix (PADM). The results show that the strength and resistance of PADM to enzymatic digestion can be adjusted by the reconnection of free amino and carboxyl groups of the collagen fibers. The cytocompatibility of the crosslinked PADM was evaluated by cell adhesion and proliferation assays. The cell culture studies on crosslinked and uncrosslinked PADM showed that the modification does not affect the scaffolds biocompatibility. These results demonstrate that the PADM collagen materials can be strengthened through a low-cost, non-toxic crosslinking method for potential use in biomedical applications.

Effects of Graphene Quantum Dots on the Self-Renewal and Differentiation of Mesenchymal Stem Cells.

The influence of graphene quantum dots (GQDs) on key characteristics of bone marrow derived mesenchymal stem cells (MSCs) phenotype (i.e., self-renewal, differentiation potential, and pluripotency) is systematically investigated in this work. First, the viability and impact of GQDs on the self-renewal potential of MSCs is evaluated in order to determine a threshold for the exposing dose. Second, GQDs uptake by MSCs is confirmed due to the excellent fluorescent properties of the particles. They exhibit a homogenous cytoplasmatic distribution that increases with the time and concentration. Third, the impact of GQDs on the osteogenic differentiation of MSCs is deeply characterized. An enhanced activity of alkaline phosphatase promoted by GQDs indicates early activation of osteogenesis. This is also confirmed upon GQD-induced up-regulation of phenotypically related osteogenic genes (Runx2, osteopontin, and osteocalcin) and specific biomarkers expression (osteopontin and osteocalcin). GQDs also effectively enhance the formation of calcium-rich deposits characteristics of osteoblasts. Furthermore, genes microarray results indicate that the enhanced osteogenic differentiation of MSCs by GQDs is in progress through a bone morphogenetic protein and transforming growth factor-β relative signaling pathways. Finally, intracytoplasmatic lipid detection shows that GQDs can also promote the adipogenic differentiation of MSCs, thus confirming the prevalence of their pluripotency potential.

Surface Charge Regulation of Osteogenic Differentiation of Mesenchymal Stem Cell on Polarized Ferroelectric Crystal Substrate

Polarized ferroelectric crystal lithium niobate wafers with different cuts are selected to offer differently charged surfaces. By induction of the mesenchymal stem cells differentiation into osteoblasts on different charged surfaces, the specific osteogenic-associated markers are assessed and the results illustrate that the positively charged wafer surface enhances rBMMSCs osteogenic differentiation.

In vitro investigation on the biodegradability and biocompatibility of genipin cross-linked porcine acellular dermal matrix with intrinsic fluorescence.

As a biocompatible and bioactive natural tissue engineering scaffold, porcine acellular dermal matrix (PADM) has limitations for the application in tissue regeneration due to its low strength and rapid biodegradation. Here, purified PADM was modified by a nontoxic cross-linker (genipin) to enhance its mechanical properties and improve its resistance to enzymatic degradation. In vitro testing results demonstrated that the stiffness of the genipin cross-linked PADM was improved and biodegradation rate was decreased. Results of cell proliferation assays showed that the cross-linking reaction by genipin did not undermine the cytocompatibility of PADM. Furthermore, genipin cross-linking imparted an observable fluorescence allowing visualization of the scaffolds three-dimensional (3D) porous structure and cell distribution by confocal laser scanning microscopy (CLSM). Immunostaining of the cell nuclei and cytoskeleton indicated that MC3T3-E1 preosteoblasts were tightly adhered to and uniformly distributed onto the cross-linked PADM scaffold. Results of this study suggest that the 3D porous genipin cross-linked PADM with intrinsic fluorescence may have broader applications for tissue engineering scaffolds where higher mechanical stiffness is needed.

Nanostructured titanate with different metal ions on the surface of metallic titanium: a facile approach for regulation of rBMSCs fate on titanium implants.

Titanium (Ti) is widely used for load-bearing bio-implants, however, it is bio-inert and exhibits poor osteo-inductive properties. Calcium and magnesium ions are considered to be involved in bone metabolism and play a physiological role in the angiogenesis, growth, and mineralization of bone tissue. In this study, a facile synthesis approach to the in situ construction of a nanostructure enriched with Ca(2+) and Mg(2+) on the surface of titanium foil is proposed by inserting Ca(2+) and Mg(2+) into the interlayers of sodium titanate nanostructures through an ion-substitution process. The characteriz 0.67, and 0.73 nm ation results validate that cations can be inserted into the interlayer regions of the layered nanostructure without any obvious change of morphology. The cation content is positively correlated to the concentration of the solutions employed. The biological assessments indicate that the type and the amount of cations in the titanate nanostructure can alter the bioactivity of titanium implants. Compared with a Na(+) filled titanate nanostructure, the incorporation of divalent ions (Mg(2+) , Ca(2+) ) can effectively enhance protein adsorption, and thus also enhance the adhesion and differentiation ability of rat bone-marrow stem cells (rBMSCs). The Mg(2+) /Ca(2+) -titanate nanostructure is a promising implantable material that will be widely applicable in artificial bones, joints, and dental implants.