Jie Guang

Small satellite remote sensing and applications-history, current and future

The small satellite renaissance began in the 1980s and is changing the economics of space. Technological trends have supported the advancement of small satellites in the 1–500 kg range. The number of countries actively participating has grown substantially during the past years. Satellite constellations (groups of satellites working in concert) are emerging as a powerful and effective application. In this paper, we focus on the small satellites than can perform remote sensing or Earth observation tasks. An overview is presented of the small satellite literature on Earth observation. The aim of the survey is threefold: an introduction for those new to the field, an overview for those working in the field and a reference for those searching for literature on a specific application for Earth observation. Small satellite programmes are classified according to the geographic regions. The small satellite industry and small satellite systems are addressed. In terms of applications, small satellite constellations are discussed in more detail. Finally, future developments are put forward. Telegeoprocessing combined with grid computing will provide the infrastructure and technologies for the development of Processing on Demand for Small Satellite Constellation systems.

Quantitative Retrieval of Geophysical Parameters Using Satellite Data

The remote sensing information service grid node (RSIN) is a tool for dealing with climate change and quantitative environmental monitoring. Based on the high-throughput computing grid, RSIN enables a workflow management system for data placement. The accompanying unified data-and-computation-schedule algorithm helps load balancing between and within workflow steps.

Validation and analysis of aerosol optical thickness retrieval over land

Aerosol optical thickness (AOT) retrieval from Moderate Resolution Imaging Spectroradiometer (MODIS) data has been well established over oceans, but this is not the case over land. In this article, the AOT data sets retrieved by exploiting the synergy of TERRA and AQUA MODIS data (SYNTAM) over land are validated with ground-based measurements from Aerosol Robotic Network (AERONET) data, as well as from the National Aeronautics and Space Administration (NASA) AOT products, amended with a DeepBlue algorithm in Asian (15–60° N and 35–150° E) and American areas (30–40° N and 100–120° W). Overall, AOT retrieval errors of around 10–20% against AERONET data are found at both 1 and 10 km resolutions. The spectral and spatial sensitivities of the AOT correlation are explicitly addressed at both 1 and 10 km resolutions. Three window sizes, 1 × 1, 3 × 3 and 5 × 5, are tested for SYNTAM to evaluate the effect of window size on parameter statistics, and it is found that the accuracy of the SYNTAM method decreases with increasing window size. The validations at three spectral bands of 0.47, 0.55 and 0.66 μm show that the accuracies of different bands are 80–90% similar, and that the band at 0.47 μm has the highest accuracy most of the time. Comparisons between AOT data sets derived from the SYNTAM and AOT products from the NASA Dark Dense Vegetation (DDV) and the DeepBlue algorithms are also conducted using data from the USA. More pixels with AOT values for the area could be retrieved using the SYNTAM method with the NASA DeepBlue algorithm. The AOT values of more than 90% of pixels derived by both methods are very close. This clearly shows that AOT data from SYNTAM are very close to the AOT data set from the NASA DeepBlue algorithm in cloud-free areas. The synergic use of both the SYNTAM and DeepBlue algorithms could produce AOT values over much greater land areas.

Grid-enabled high-performance quantitative aerosol retrieval from remotely sensed data

As the quality and accuracy of remote-sensing instruments improve, the ability to quickly process remotely sensed data is in increasing demand. Quantitative remote-sensing retrieval is a complex computing process because of the terabytes or petabytes of data processed and the tight-coupling remote-sensing algorithms. In this paper, we intend to demonstrate the use of grid computing for quantitative remote-sensing retrieval applications with a workload estimation and task partition algorithm. Using a grid workflow for the quantitative remote-sensing retrieval service is an intuitive way to use the grid service for users without grid expertise. A case study showed that significant improvement in the system performance could be achieved with this implementation. The results of the case study also give a perspective on the potential of applying grid computing practices to remote-sensing problems.

Observation of an agricultural biomass burning in central and east China using merged aerosol optical depth data from multiple satellite missions

Agricultural biomass burning (ABB) in central and east China occurs every year from May to October and peaks in June. During the period from 26 May to 16 June 2007, one strong ABB procedure happened mainly in Anhui, Henan, Jiangsu and Shandong provinces. This article focuses on analysis of this ABB procedure using a comprehensive set of aerosol optical depth (AOD) data merged by using the optimal interpolation method from the Moderate Resolution Imaging Spectroradiometer, the Multi-angle Imaging Spectroradiometer (MIRS) as well as Sea-viewing Wide Field-of-view Sensor (SeaWiFS)-derived AOD products. In addition, the following additional data are used: fire data from the National Satellite Meteorological Centre of China Meteorological Administration, the mass trajectory analyses from hybrid single-particle Lagrangian integrated trajectory (HYSPLIT) model and ground-based AOD and Ångström data derived from the Aerosol Robotic Network and China Aerosol Remote Sensing Network. The results show that merged satellite AOD values can expand the spatial coverage of agricultural biomass aerosol distributions with good accuracy (R = 0.93, root mean square error = 0.37). Based on the merged AOD images, the highest AOD values were found concentrated in central China as well as in eastern China before 6 June and further extended to northeast China after 12 June. AODs from ground measurement show that eastern China always keeps high AOD values (>1.0), with a maximum exceeding 3.0 and extending as high as nearly 5.0 during this ABB event. With the help of the HYSPLIT model, we analysed the ABB sources and examined how transport paths affect the concentrations of air pollutants in some sites. The results show that Henan, Jiangsu and Anhui provinces are the three main sources in this ABB.

Prior knowledge-supported aerosol optical depth retrieval over land surfaces at 500 m spatial resolution with MODIS data

Aerosol optical depth (AOD) values at a spatial resolution of 500 m were retrieved over terrain areas by applying a time series of Moderate resolution Imaging Spectroradiometer (MODIS) 500 m resolution data in the Heihe region (36–42° N, 97–104° E) of Gansu Province, China; in the Pearl River Delta (18–30° N, 108–122° E), China; and in Beijing (39–41° N, 115–118° E), China. A novel prior knowledge scheme was used in the algorithm that performs cloud screening, simultaneous AOD and surface reflectance retrieval from the MODIS 500 m Level 1B data. This prior knowledge scheme produced a new Ångström exponent α, utilizing a Terra pass time α and an Aqua pass time α to better satisfy the invariant α assumption. The retrieved AOD data were compared with AOD data observed with the ground-based, automatic Sun-tracking photometer CE318 at corresponding bands in the Heihe region and with Aerosol Robotic Network (AERONET) data in the Pearl River Delta and in Beijing. Validation experiments demonstrated the potential of applying the algorithm to MODIS 500 m AOD retrieval on land; validation showed the uncertainty of Δτ = ±0.1±0.2τ over various types of underlying land surface, including cities, where τ is the aerosol optical depth. The root mean square errors (RMSEs) were around 0.1 for inland regions and up to 0.24 for cities by the sea, such as Hong Kong and Zhongshan, China.

A high throughput geocomputing system for remote sensing quantitative retrieval and a case study

Abstract The quality and accuracy of remote sensing instruments have been improved significantly, however, rapid processing of large-scale remote sensing data becomes the bottleneck for remote sensing quantitative retrieval applications. The remote sensing quantitative retrieval is a data-intensive computation application, which is one of the research issues of high throughput computation. The remote sensing quantitative retrieval Grid workflow is a high-level core component of remote sensing Grid, which is used to support the modeling, reconstruction and implementation of large-scale complex applications of remote sensing science. In this paper, we intend to study middleware components of the remote sensing Grid – the dynamic Grid workflow based on the remote sensing quantitative retrieval application on Grid platform. We designed a novel architecture for the remote sensing Grid workflow. According to this architecture, we constructed the Remote Sensing Information Service Grid Node (RSSN) with Condor. We developed a graphic user interface (GUI) tools to compose remote sensing processing Grid workflows, and took the aerosol optical depth (AOD) retrieval as an example. The case study showed that significant improvement in the system performance could be achieved with this implementation. The results also give a perspective on the potential of applying Grid workflow practices to remote sensing quantitative retrieval problems using commodity class PCs.

Workload and task management of Grid-enabled quantitative aerosol retrieval from remotely sensed data

As the quality and accuracy of remote sensing instruments improve, the ability to quickly process remotely sensed data is in increasing demand. Quantitative retrieval of aerosol properties from remotely sensed data is a data-intensive scientific application, where the complexities of processing, modeling and analyzing large volumes of remotely sensed data sets have significantly increased computation and data demands. While Grid computing has been a prominent technique to tackle computational issues, little work has been done on making Grid computing adapted to remote sensing applications. In this paper, we intended to demonstrate the usage of Grid computing for quantitative remote sensing retrieval applications. A workload estimation and task partition algorithm was developed, and it executes a generic remote sensing algorithm in parallel over partitioned datasets, which is embedded in a middleware framework for remote sensing retrieval named the Remote Sensing Information Service Grid Node (RSIN). A case study shows that significant improvement of system performance can be achieved with this implementation. It also gives a perspective on the potential of applying Grid computing practices to remote sensing problems.

Retrieval of aerosol optical depth over bright land surfaces by coupling bidirectional reflectance distribution function model and aerosol retrieval model

A novel aerosol optical depth (AOD) retrieval algorithm is developed by integrating a kernel-driven bidirectional reflectance distribution function (BRDF) model and the multi-satellite AOD retrieval model for Moderate Resolution Imaging Spectroradiometer (MODIS) data. As there is close coupling of AOD and surface reflectance in satellite signal, one will be traditionally assuming a prior in order to solve another one. However, we build a group of equations to solve both AOD and surface reflectance at the same time in our algorithm. Applying this new algorithm to Terra and Aqua MODIS data in Beijing, China, allows AOD and surface reflectance of this region to be retrieved. Results indicate that the MODIS AOD derived from the new method is consistent with AErosol RObotic NETwork (AERONET), with correlation coefficient (R 2) of 0.812 and root mean square error (RMSE) of 0.04 at 0.55 μm.

Dust aerosol optical depth retrieval and dust storm detection for Xinjiang Region using Indian National Satellite Observations

The Xinjiang Uyghur Autonomous Region (Xinjiang) is located near the western border of China. Xinjiang has a high frequency of dust storms, especially in late winter and early spring. Geostationary satellite remote sensing offers an ideal way to monitor the regional distribution and intensity of dust storms, which can impact the regional climate. In this study observations from the Indian National Satellite (INSAT) 3D are used for dust storm detection in Xinjiang because of the frequent 30-min observations with six bands. An analysis of the optical properties of dust and its quantitative relationship with dust storms in Xinjiang is presented for dust events in April 2014. The Aerosol Optical Depth (AOD) derived using six predefined aerosol types shows great potential to identify dust events. Cross validation between INSAT-3D retrieved AOD and MODIS AOD shows a high coefficient of determination (R2 = 0.92). Ground validation using AERONET (Aerosol Robotic Network) AOD also shows a good correlation with R2 of 0.77. We combined the apparent reflectance (top-of-atmospheric reflectance) of visible and shortwave infrared bands, brightness temperature of infrared bands and retrieved AOD into a new Enhanced Dust Index (EDI). EDI reveals not only dust extent but also the intensity. EDI performed very well in measuring the intensity of dust storms between 22 and 24 April 2014. A visual comparison between EDI and Feng Yun-2E (FY-2E) Infrared Difference Dust Index (IDDI) also shows a high level of similarity. A good linear correlation (R2 of 0.78) between EDI and visibility on the ground demonstrates good performance of EDI in estimating dust intensity. A simple threshold method was found to have a good performance in delineating the extent of the dust plumes but inadequate for providing information on dust plume intensity.