Jilei Liu

Three-Dimensional Graphene Foam Supported Fe3O4 Lithium Battery Anodes with Long Cycle Life and High Rate Capability

Fe3O4 has long been regarded as a promising anode material for lithium ion battery due to its high theoretical capacity, earth abundance, low cost, and nontoxic properties. However, up to now no effective and scalable method has been realized to overcome the bottleneck of poor cyclability and low rate capability. In this article, we report a bottom-up strategy assisted by atomic layer deposition to graft bicontinuous mesoporous nanostructure Fe3O4 onto three-dimensional graphene foams and directly use the composite as the lithium ion battery anode. This electrode exhibits high reversible capacity and fast charging and discharging capability. A high capacity of 785 mAh/g is achieved at 1C rate and is maintained without decay up to 500 cycles. Moreover, the rate of up to 60C is also demonstrated, rendering a fast discharge potential. To our knowledge, this is the best reported rate performance for Fe3O4 in lithium ion battery to date.

High-performance flexible asymmetric supercapacitors based on a new graphene foam/carbon nanotube hybrid film

In this work, we report the fabrication of a new 3D graphene foam (GF)/carbon nanotube (CNT) hybrid film with high flexibility and robustness as the ideal support for deposition of large amounts of electrochemically active materials per unit area. To demonstrate the concept, we have deposited MnO2 and polypyrrole (Ppy) on the GF/CNT films and successfully fabricated lightweight and flexible asymmetric supercapacitors (ASCs). These ASCs assembled from GF/CNT/MnO2 and GF/CNT/Ppy hybrid films with high loading of electroactive materials in an aqueous electrolyte are able to function with an output voltage of 1.6 V, and deliver high energy/power density (22.8 W h kg−1 at 860 W kg−1 and 2.7 kW kg−1 at 6.2 W h kg−1). The rate performance can be further improved with less loading of electroactive materials (10.3 kW kg−1 at 10.9 W h kg−1). The ASCs demonstrate remarkable cycling stability (capacitance retention of 90.2–83.5% after 10 000 cycles), which is among the best reported for ASCs with both electrodes made of non-carbon electroactive materials. Also the ASCs are able to perfectly retain their electrochemical performance at different bending angles. These ASCs demonstrate great potential as power sources for flexible and lightweight electronic devices.

A V2O5/Conductive‐Polymer Core/Shell Nanobelt Array on Three‐Dimensional Graphite Foam: A High‐Rate, Ultrastable, and Freestanding Cathode for Lithium‐Ion Batteries

A thin polymer shell helps V2O5 a lot. Short V2O5 nanobelts are grown directly on 3D graphite foam as a lithium-ion battery (LIB) cathode material. A further coating of a poly(3,4-ethylenedioxythiophene) (PEDOT) thin shell is the key to the high performance. An excellent high-rate capability and ultrastable cycling up to 1000 cycles are demonstrated.

Array of nanosheets render ultrafast and high-capacity Na-ion storage by tunable pseudocapacitance

Sodium-ion batteries are a potentially low-cost and safe alternative to the prevailing lithium-ion battery technology. However, it is a great challenge to achieve fast charging and high power density for most sodium-ion electrodes because of the sluggish sodiation kinetics. Here we demonstrate a high-capacity and high-rate sodium-ion anode based on ultrathin layered tin(II) sulfide nanostructures, in which a maximized extrinsic pseudocapacitance contribution is identified and verified by kinetics analysis. The graphene foam supported tin(II) sulfide nanoarray anode delivers a high reversible capacity of ∼1,100 mAh g−1 at 30 mA g−1 and ∼420 mAh g−1 at 30 A g−1, which even outperforms its lithium-ion storage performance. The surface-dominated redox reaction rendered by our tailored ultrathin tin(II) sulfide nanostructures may also work in other layered materials for high-performance sodium-ion storage.

Self‐Assembly of Honeycomb‐like MoS2 Nanoarchitectures Anchored into Graphene Foam for Enhanced Lithium‐Ion Storage

Honeycomb-like MoS2 nanoarchitectures anchored into 3D graphene foam are successfully fabricated as a high-performance positive electrode for enhanced Li-ion storage. The unique 3D interpenetrating honeycomb-like structure is the key to the high performance. High reversible capacity, superior high-rate capability, and excellent cycling stability are demonstrated.

Iron Oxide-Decorated Carbon for Supercapacitor Anodes with Ultrahigh Energy Density and Outstanding Cycling Stability

Supercapacitor with ultrahigh energy density (e.g., comparable with those of rechargeable batteries) and long cycling ability (>50000 cycles) is attractive for the next-generation energy storage devices. The energy density of carbonaceous material electrodes can be effectively improved by combining with certain metal oxides/hydroxides, but many at the expenses of power density and long-time cycling stability. To achieve an optimized overall electrochemical performance, rationally designed electrode structures with proper control in metal oxide/carbon are highly desirable. Here we have successfully realized an ultrahigh-energy and long-life supercapacitor anode by developing a hierarchical graphite foam-carbon nanotube framework and coating the surface with a thin layer of iron oxide (GF-CNT@Fe2O3). The full cell of anode based on this structure gives rise to a high energy of ∼74.7 Wh/kg at a power of ∼1400 W/kg, and ∼95.4% of the capacitance can be retained after 50000 cycles of charge-discharge. These performance features are superior among those reported for metal oxide based supercapacitors, making it a promising candidate for the next generation of high-performance electrochemical energy storage.

A flexible alkaline rechargeable Ni/Fe battery based on graphene foam/carbon nanotubes hybrid film.

The development of portable and wearable electronics has promoted increasing demand for high-performance power sources with high energy/power density, low cost, lightweight, as well as ultrathin and flexible features. Here, a new type of flexible Ni/Fe cell is designed and fabricated by employing Ni(OH)2 nanosheets and porous Fe2O3 nanorods grown on lightweight graphene foam (GF)/carbon nanotubes (CNTs) hybrid films as electrodes. The assembled f-Ni/Fe cells are able to deliver high energy/power densities (100.7 Wh/kg at 287 W/kg and 70.9 Wh/kg at 1.4 kW/kg, based on the total mass of active materials) and outstanding cycling stabilities (retention 89.1% after 1000 charge/discharge cycles). Benefiting from the use of ultralight and thin GF/CNTs hybrid films as current collectors, our f-Ni/Fe cell can exhibit a volumetric energy density of 16.6 Wh/l (based on the total volume of full cell), which is comparable to that of thin film battery and better than that of typical commercial supercapacitors. Moreover, the f-Ni/Fe cells can retain the electrochemical performance with repeated bendings. These features endow our f-Ni/Fe cells a highly promising candidate for next generation flexible energy storage systems.

P-type electrical, photoconductive, and anomalous ferromagnetic properties of Cu2O nanowires

Cu2O nanowires are synthesized by reduction of CuO nanowires with hydrogen gas. Strong green photoluminescence dominated by band-edge emission is observed. Field effect transistors fabricated from individual Cu2O nanowires present high on-off ratio (>106) and high mobility (>95 cm2/V s). Furthermore, the device demonstrates a fast photoelectric response to blue illumination in air at room temperature. In addition, anomalous ferromagnetism appears in Cu2O nanowires, which may originate from the defects in Cu2O nanowires. This work shows the application potentials of the Cu2O nanowires, especially in an electrical and photonic device.

A Green Approach to the Synthesis of High-Quality Graphene Oxide Flakes via Electrochemical Exfoliation of Pencil Core

A simple, green and cost-effective approach has been reported to synthesize high-quality graphene oxide (GO) flakes via electrochemical exfoliation of pencil cores in aqueous electrolytes. The exfoliated GO flakes exhibit excellent electrocatalytic activity and toxicity tolerance for oxygen reduction reactions in alkaline solution. Our present results are promising for scaled-up preparation and further commercialization of graphene oxide in a low-cost and environmentally friendly way.

Nitrogen-doped Graphene-Supported Transition-metals Carbide Electrocatalysts for Oxygen Reduction Reaction

A novel and facile two-step strategy has been designed to prepare high performance bi-transition-metals (Fe- and Mo-) carbide supported on nitrogen-doped graphene (FeMo-NG) as electrocatalysts for oxygen reduction reactions (ORR). The as-synthesized FeMo carbide -NG catalysts exhibit excellent electrocatalytic activities for ORR in alkaline solution, with high onset potential (−0.09 V vs. saturated KCl Ag/AgCl), nearly four electron transfer number (nearly 4) and high kinetic-limiting current density (up to 3.5 mA cm−2 at −0.8 V vs. Ag/AgCl). Furthermore, FeMo carbide -NG composites show good cycle stability and much better toxicity tolerance durability than the commercial Pt/C catalyst, paving their application in high-performance fuel cell and lithium-air batteries.