Jimmy Romanos

Nanospace engineering of KOH activated carbon

This paper demonstrates that nanospace engineering of KOH activated carbon is possible by controlling the degree of carbon consumption and metallic potassium intercalation into the carbon lattice during the activation process. High specific surface areas, porosities, sub-nanometer (<1 nm) and supra-nanometer (1-5 nm) pore volumes are quantitatively controlled by a combination of KOH concentration and activation temperature. The process typically leads to a bimodal pore size distribution, with a large, approximately constant number of sub-nanometer pores and a variable number of supra-nanometer pores. We show how to control the number of supra-nanometer pores in a manner not achieved previously by chemical activation. The chemical mechanism underlying this control is studied by following the evolution of elemental composition, specific surface area, porosity, and pore size distribution during KOH activation and preceding H(3)PO(4) activation. The oxygen, nitrogen, and hydrogen contents decrease during successive activation steps, creating a nanoporous carbon network with a porosity and surface area controllable for various applications, including gas storage. The formation of tunable sub-nanometer and supra-nanometer pores is validated by sub-critical nitrogen adsorption. Surface functional groups of KOH activated carbon are studied by microscopic infrared spectroscopy.

Hypothetical High-Surface-Area Carbons with Exceptional Hydrogen Storage Capacities: Open Carbon Frameworks

A class of high-surface-area carbon hypothetical structures has been investigated that goes beyond the traditional model of parallel graphene sheets hosting layers of physisorbed hydrogen in slit-shaped pores of variable width. The investigation focuses on structures with locally planar units (unbounded or bounded fragments of graphene sheets), and variable ratios of in-plane to edge atoms. Adsorption of molecular hydrogen on these structures was studied by performing grand canonical Monte Carlo simulations with appropriately chosen adsorbent-adsorbate interaction potentials. The interaction models were tested by comparing simulated adsorption isotherms with experimental isotherms on a high-performance activated carbon with well-defined pore structure (approximately bimodal pore-size distribution), and remarkable agreement between computed and experimental isotherms was obtained, both for gravimetric excess adsorption and for gravimetric storage capacity. From this analysis and the simulations performed on the new structures, a rich spectrum of relationships between structural characteristics of carbons and ensuing hydrogen adsorption (structure-function relationships) emerges: (i) Storage capacities higher than in slit-shaped pores can be obtained by fragmentation/truncation of graphene sheets, which creates surface areas exceeding of 2600 m(2)/g, the maximum surface area for infinite graphene sheets, carried mainly by edge sites; we call the resulting structures open carbon frameworks (OCF). (ii) For OCFs with a ratio of in-plane to edge sites ≈1 and surface areas 3800-6500 m(2)/g, we found record maximum excess adsorption of 75-85 g of H(2)/kg of C at 77 K and record storage capacity of 100-260 g of H(2)/kg of C at 77 K and 100 bar. (iii) The adsorption in structures having large specific surface area built from small polycyclic aromatic hydrocarbons cannot be further increased because their energy of adsorption is low. (iv) Additional increase of hydrogen uptake could potentially be achieved by chemical substitution and/or intercalation of OCF structures, in order to increase the energy of adsorption. We conclude that OCF structures, if synthesized, will give hydrogen uptake at the level required for mobile applications. The conclusions define the physical limits of hydrogen adsorption in carbon-based porous structures.

Engineered Porous Carbon for High Volumetric Methane Storage

This paper covers the optimization of methane volumetric storage capacity by controlling the sub-nanometre (<1 nm) and supra-nanometre (1–5 nm) pore volumes. Nanospace engineering of KOH activated carbon generates an ideal structure for methane storage in which gas molecules are adsorbed as a high-density fluid by strong van der Waals forces into pores that are a few molecules in diameter. High specific surface areas, porosities, sub-nanometre (<1 nm) and supra-nanometre (1–5 nm) pore volumes are quantitatively selected by controlling the degree of carbon consumption and metallic potassium intercalation into the carbon lattice during the activation process. The formation of tuneable sub-nanometre and supra-nanometre pores is validated by sub-critical nitrogen adsorption. Aberration-corrected scanning transmission electron microscopy data show the atomic structure of high-surface-area activated carbon (2600 m2/g). While high surface area and high porosity are optimal for gravimetric methane storage, the results indicate that an exclusive sub-nanometre region, a low porosity and an acceptable surface area (approximately 2000 m2/g) are ideal for methane volumetric storage, storing 120 g CH4/l (184 vol/vol) at 35 bar and room temperature (22 °C). High-pressure methane isotherms up to 150 bar at 30, −25 and −50 °C on optimal activated carbons are presented. Methane volumetric storage capacity at 35 bar reaches 176 g/l (269 vol/vol) and 202 g/l (309 vol/vol) at −25 and −50 °C, respectively.