Jin-Woo Oh

Bioinspired piezoelectric nanogenerators based on vertically aligned phage nanopillars

Bioinspired nanogenerators based on vertically aligned phage nanopillars are inceptively demonstrated. Vertically aligned phage nanopillars enable not only a high piezoelectric response but also a tuneable piezoelectricity. Piezoelectricity is also modulated by tuning of the proteins dipoles in each phage. The sufficient electrical power from phage nanopillars thus holds promise for the development of self-powered implantable and wearable electronics.

PLGA nanofiber membranes loaded with epigallocatechin-3-O-gallate are beneficial to prevention of postsurgical adhesions.

This study concentrates on the development of biodegradable nanofiber membranes with controlled drug release to ensure reduced tissue adhesion and accelerated healing. Nanofibers of poly(lactic-co-glycolic acid) (PLGA) loaded with epigallocatechin-3-O-gallate (EGCG), the most bioactive polyphenolic compound in green tea, were electrospun. The physicochemical and biomechanical properties of EGCG-releasing PLGA (E-PLGA) nanofiber membranes were characterized by atomic force microscopy, EGCG release and degradation profiles, and tensile testing. In vitro antioxidant activity and hemocompatibility were evaluated by measuring scavenged reactive oxygen species levels and activated partial thromboplastin time, respectively. In vivo antiadhesion efficacy was examined on the rat peritonea with a surgical incision. The average fiber diameter of E-PLGA membranes was approximately 300–500 nm, which was almost similar to that of pure PLGA equivalents. E-PLGA membranes showed sustained EGCG release mediated by controlled diffusion and PLGA degradation over 28 days. EGCG did not adversely affect the tensile strength of PLGA membranes, whereas it significantly decreased the elastic modulus and increased the strain at break. E-PLGA membranes were significantly effective in both scavenging reactive oxygen species and extending activated partial thromboplastin time. Macroscopic observation after 1 week of surgical treatment revealed that the antiadhesion efficacy of E-PLGA nanofiber membranes was significantly superior to those of untreated controls and pure PLGA equivalents, which was comparable to that of a commercial tissue-adhesion barrier. In conclusion, the E-PLGA hybrid nanofiber can be exploited to craft strategies for the prevention of postsurgical adhesions.

Temperature Dependence on the Grating Formation in a Low-Tg Polymeric Photorefractive Composite

We investigated a dependence of the grating formation on the temperature in polymeric photorefractive (PR) composite, in terms of magnitude and buildup speed of the PR grating. For polymeric PR materials, the temperature is one of the most important factors together with the external electric field because it is closely related on photocharge generation efficiency, mobility of generated carrier, electro-optic coefficient tensor, and so on. Above the glass transition temperature, the diffraction efficiency of degenerate four-wave mixing decreased with increasing the temperature; it can be explained with the magnitude of space-charge field and the electro-optic behavior at different temperatures. The space-charge field decreased linearly with increasing temperature due to a decrease in the photocharge generation efficiency and an increase in the hole detrapping by the high dark conductivity. Also as we expected, the PR grating buildup speed, which is strongly dependent on the photoconductivity, steeply decreased with increasing the temperature, and its tendency was similar to the temperature dependence of the phase shift.

Recent advances of nanostructure implemented spectroscopic sensors—A brief overview

ABSTRACT By the conjugation of requirements of high-performance sensing platforms and developments of nanotechnology, various nanostructure implemented photonic, spectroscopic sensors have been investigated. In this review article, we address 3 types of nanostructure implemented optical sensor techniques—localized surface plasmon resonance (LSPR) sensors, extraordinary optical transmission (EOT) based sensors, and Raman-based spectroscopic sensors—and recent advances of the nanostructure assisted sensors arranged by 2 important issues: the employment of novel nanostructures and the application of newly investigated fabrication techniques for larger sensing area.

In situ forming gelatin/graphene oxide hydrogels for facilitated C2C12 myoblast differentiation

ABSTRACT Recently, numerous studies have focused on the development of scaffolds for skeletal tissue engineering and regeneration with various structures. Among various structures, in situ forming hydrogels have attracted considerable attention because they can provide 3D microenvironments for cells, and their stiffness and elasticity can be easily controlled by physical or chemical means. Over the last decade, graphene oxide (GO) has been widely explored as a potential candidate for biomaterials because of its excellent physicochemical properties and outstanding biocompatibility. In this study, horseradish peroxide-reactive gelatin polymer (GH) hydrogels incorporated with GO were prepared and their physicochemical and biomechanical properties were characterized by scanning electron microscopy, Raman and Fourier transform-infrared spectroscopy, ther-mogravimetric analysis, and rheological study. The cellular behaviors of the C2C12 myoblasts within the GO-incorporated GH (GH/GO) hydrogels were examined by a cell counting kit-8 assay and immunocytochemistry. GO was uniformly distributed inside the GH hydrogels without affecting their physicochemical and biomechanical properties. GH/GO hydrogels facilitated the myogenic differentiation of C2C12 cells without hindering their proliferation. These results suggest that GH/GO hydrogels can be exploited to craft a range of strategies for the development of promising scaffolds to accelerate skeletal tissue regeneration because of their potential to stimulate myogenesis.

Enhanced photorefractive performance of polymeric composites through surface plasmon effects of gold nanoparticles

We investigated the photorefractivity enhancement of polymeric composites by introducing gold nanoparticles (NPs). The gold NPs enhance the photocharge generation rate of sensitizers through plasmon resonance coupling achieved between NPs and sensitizers. Systematic studies show that the presence of gold NPs has increased photocharge generation efficiency, photoconductivity, diffraction efficiency, refractive index modulation, and photorefractive (PR) grating formation rate. The gold-NP-doped PR sample exhibits 2 times larger photocharge generation efficiency and photoconductivity, and 2.5 times faster PR grating formation rate compared to the control sample without the NPs.

Biomimetic Hybrid Nanofiber Sheets Composed of RGD Peptide-Decorated PLGA as Cell-Adhesive Substrates.

In biomedical applications, there is a need for tissue engineering scaffolds to promote and control cellular behaviors, including adhesion, proliferation and differentiation. In particular, the initial adhesion of cells has a great influence on those cellular behaviors. In this study, we concentrate on developing cell-adhesive substrates applicable for tissue engineering scaffolds. The hybrid nanofiber sheets were prepared by electrospinning poly(lactic-co-glycolic acid) (PLGA) and M13 phage, which was genetically modified to enhance cell adhesion thru expressing RGD peptides on their surface. The RGD peptide is a specific motif of extracellular matrix (ECM) for integrin receptors of cells. RGD peptide-decorated PLGA (RGD-PLGA) nanofiber sheets were characterized by scanning electron microscopy, immunofluorescence staining, contact angle measurement and differential scanning calorimetry. In addition, the initial adhesion and proliferation of four different types of mammalian cells were determined in order to evaluate the potential of RGD-PLGA nanofiber sheets as cell-adhesive substrates. Our results showed that the hybrid nanofiber sheets have a three-dimensional porous structure comparable to the native ECM. Furthermore, the initial adhesion and proliferation of cells were significantly enhanced on RGD-PLGA sheets. These results suggest that biomimetic RGD-PLGA nanofiber sheets can be promising cell-adhesive substrates for application as tissue engineering scaffolds.

Triarylamine-Functionalized Ru Dyes with Different Conjugation Lengths for Highly Efficient Dye Sensitized Solar Cells

Triarylamine-functionalized ruthenium (Ru) complexes with different conjugation linkage lengths are synthesized and applied to dye-sensitized solar cells (DSSCs). These triarylamine-functionalized Ru complexes show appreciably high extinction coefficients. DSSCs based on the new dye show higher power conversion efficiency than standard N3 dyes under same conditions. Among others, Ru-TP3 dye that has the longest conjugation length shows the highest efficiency of 3.7% under simulated 1 sun illumination (AM 1.5).

RGD peptide and graphene oxide co-functionalized PLGA nanofiber scaffolds for vascular tissue engineering

Abstract In recent years, much research has been suggested and examined for the development of tissue engineering scaffolds to promote cellular behaviors. In our study, RGD peptide and graphene oxide (GO) co-functionalized poly(lactide-co-glycolide, PLGA) (RGD-GO-PLGA) nanofiber mats were fabricated via electrospinning, and their physicochemical and thermal properties were characterized to explore their potential as biofunctional scaffolds for vascular tissue engineering. Scanning electron microscopy images revealed that the RGD-GO-PLGA nanofiber mats were readily fabricated and composed of random-oriented electrospun nanofibers with average diameter of 558 nm. The successful co-functionalization of RGD peptide and GO into the PLGA nanofibers was confirmed by Fourier-transform infrared spectroscopic analysis. Moreover, the surface hydrophilicity of the nanofiber mats was markedly increased by co-functionalizing with RGD peptide and GO. It was found that the mats were thermally stable under the cell culture condition. Furthermore, the initial attachment and proliferation of primarily cultured vascular smooth muscle cells (VSMCs) on the RGD-GO-PLGA nanofiber mats were evaluated. It was revealed that the RGD-GO-PLGA nanofiber mats can effectively promote the growth of VSMCs. In conclusion, our findings suggest that the RGD-GO-PLGA nanofiber mats can be promising candidates for tissue engineering scaffolds effective for the regeneration of vascular smooth muscle.

Identification of Endocrine Disrupting Chemicals using a Virus-Based Colorimetric Sensor

A simple and portable colorimetric sensor based on M13 bacteriophage (phage) was devised to identify a class of endocrine disrupting chemicals, including benzene, phthalate, and chlorobenzene derivatives. Arrays of structurally and genetically modified M13 bacteriophage were fabricated so as to produce a biomimetic colorimetric sensor, and color changes in the phage arrays in response to several benzene derivatives were characterized. The sensor was also used to classify phthalate and chlorobenzene derivatives as representatives of endocrine disrupting chemicals. The characteristic color patterns obtained on exposure to various benzene derivatives enabled similar chemical structures in the vapor phase to be classified. Our sensing approach based on the use of a genetically surface modified M13 bacteriophage offers a promising platform for portable, simple environmental monitors that could be extended for use in numerous application areas, including food monitoring, security monitoring, explosive risk assessment, and point of care testing.