Jinfeng Dong

Design and optimization of a new self-nanoemulsifying drug delivery system

To improve the dissolution rate of ibuprofen, a model poorly water soluble drug, self-nanoemulsifying drug delivery systems (SNEDDS) were developed. Various surfactants and oils were screened as candidates for SNEDDS on the basis of droplet size of the resulting emulsions. The influence of the constituent structure, concentration and the composition of SNEDDS formulations, and the emulsifier HLB value, on the properties of the resulting emulsions was systematically investigated. Several SNEDDS formulations were employed to study the relationship between the emulsion droplet size and the dissolution rate of ibuprofen. The dissolution rate was accelerated by decreasing the nanoemulsion droplet size, and was significantly faster than that from a conventional tablet. The optimal SNEDDS formulation had a mean nanoemulsion droplet diameters of 58 nm in phosphate buffer, pH 6.8 (simulated intestinal fluid), and released ibuprofen more than 95% within 30 min. Therefore, these novel SNEDDS carriers appear to be useful for controlling the release rate of poorly water soluble drugs.

Nanoemulsions Prepared by a Two-Step Low-Energy Process

A simple low-energy two-step dilution process has been applied in oil/surfactant/water systems with pentaoxyethylene lauryl ether (C12E5), dodecyldimethylammonium bromide, sodium bis(2-ethylhexyl)sulfosuccinate, sodium n-dodecyl sulfate-pentanol, and hexadecyltrimethylammonium bromide-pentanol. Appropriate formulations were chosen for the concentrate to be diluted with water to generate oil-in-water (O/W) emulsions or nanoemulsions. For the system of decane/C12E5/water, bluish, transparent nanoemulsions having droplet radii of the order of 15 nm were formed, only when the initial concentrate was a bicontinuous microemulsion, whereas opaque emulsions were generated if the concentrate began in an emulsion-phase region. Nanoemulsions generated in the system decane/C12E5/water have been investigated both by dynamic light scattering (DLS) and contrast-variation small-angle neutron scattering (SANS). The SANS profiles show that nanodroplets exist as spherical core-shell (decane-C12E5) particles, which suffer essentially no structural change on dilution with water, at least for volume fractions phi down to 0.060. These results suggest that the nanoemulsion droplet structure is mainly controlled by the phase behavior of the initial concentrate and is largely independent of dilution. A discrepancy between apparent nanoemulsion droplet sizes was observed by comparing DLS and SANS data, which is consistent with long-range droplet interactions occurring outside of the SANS sensitivity range. These combined phase behavior, SANS, and DLS results suggest a different reason for the stability/instability of nanoemulsions compared with earlier studies, and here it is proposed that a general mechanism for nanoemulsion formation is homogeneous nucleation of oil droplets during the emulsification.

Formation and stability of nanoemulsions with mixed ionic–nonionic surfactants

A simple, low-energy two-step dilution process has been applied with binary mixtures of ionic-nonionic surfactants to prepare nanoemulsions. The systems consist of water/DDAB-C(12)E(5)/decane. Nanoemulsions were obtained by dilution of concentrates located in bicontinuous microemulsion or lamellar liquid crystal phase regions. The nanoemulsions generated were investigated both by contrast-variation small-angle neutron scattering (SANS) and dynamic light scattering (DLS). The SANS profiles show that C(12)E(5) nanodroplets suffer essentially no structural change on incorporation of the cationic DDAB surfactant, except for increased electrostatic repulsive interactions. Interestingly, SANS indicated that the preferred droplet sizes were hardly affected by the surfactant mixture composition (up to a DDAB molar ratio (m(DDAB)/(m(DDAB) + m(C(12)E(5))) of 0.40) and droplet volume fraction, phi, between 0.006 and 0.120. No notable changes in the structure or radius of nanoemulsion droplets were observed by SANS over the test period of 1 d, although the droplet number intensity decreased significantly in systems stabilized by C(12)E(5) only. However, the DLS sizing shows a marked increase with time, with higher droplet volume fractions giving rise to the largest changes. The discrepancy between apparent nanoemulsion droplet size determined by DLS and SANS data can be attributed to long-range droplet interactions occurring outside of the SANS sensitivity range. The combined SANS and DLS results suggest flocculation is the main mechanism of instability for these nanoemulsions. The flocculation rate is shown to be significantly retarded by addition of the charged DDAB, which may be due to enhanced electrostatic repulsive forces between droplets, leading to improved stability of the nanoemulsions.

Surface properties of Gemini surfactants with pyrrolidinium head groups.

Gemini surfactants C(n)-4-(n)PB (where n represents the alkyl chain length of 10, 12, 14 and 16) were synthesized and characterized. Their surface activity, thermodynamic properties, and aggregation behavior were investigated by means of surface tension, electrical conductivity, and steady-state fluorescence. It was found that the Gemini surfactants C(n)-4-(n)PB have superior surface activity to their corresponding monomer surfactants C(n)MPB as expected. Additionally, these compounds have lower cmc and surface tension in comparison with conventional cationic Gemini surfactants m-4-m. Thermodynamic parameters (ΔG(m)(0),ΔH(m)(0),TΔS(m)(0)) show that the micellization is an entropy driven process with shorter hydrophobic chain lengths but instead is enthalpy driven for longer hydrophobic chain lengths. The effect of the hydrophobic alkyl chain length and the addition of inorganic salt NaBr on the surface activity and micellization are in line with the conventional cationic Gemini surfactants.

A many-body dissipative particle dynamics study of forced water-oil displacement in capillary.

The forced water-oil displacement in capillary is a model that has important applications such as the groundwater remediation and the oil recovery. Whereas it is difficult for experimental studies to observe the displacement process in a capillary at nanoscale, the computational simulation is a unique approach in this regard. In the present work, the many-body dissipative particle dynamics (MDPD) method is employed to simulate the process of water-oil displacement in capillary with external force applied by a piston. As the property of all interfaces involved in this system can be manipulated independently, the dynamic displacement process is studied systematically under various conditions of distinct wettability of water in capillary and miscibility between water and oil as well as of different external forces. By analyzing the dependence of the starting force on the properties of water/capillary and water/oil interfaces, we find that there exist two different modes of the water-oil displacement. In the case of stronger water-oil interaction, the water particles cannot displace those oil particles sticking to the capillary wall, leaving a low oil recovery efficiency. To minimize the residual oil content in capillary, enhancing the wettability of water and reducing the external force will be beneficial. This simulation study provides microscopic insights into the water-oil displacement process in capillary and guiding information for relevant applications.

Azobenzene dye induced micelle to vesicle transition in cationic surfactant aqueous solutions

A photo-responsive azobenzene dye, sodium 4-[(E)-phenyldiazenyl] benzoate (AZONa), was employed to induce microstructural changes with cetyltrimethylammonium bromide (CTAB) in aqueous solution. A spherical micelle to vesicle transition via wormlike micelles was investigated by employing turbidity, viscosity, and dynamic light scattering measurements, as well as cryo-transmission electronic microscopy. At a certain molar ratio [AZONa]/[CTAB] of 0.65 the zero-shear viscosity achieve a maximum, showing clearly the formation of wormlike micelles that obey the classic Maxwellian behavior at low shear frequencies. At this critical molar ratio, an increase in temperature resulted in the breakdown of wormlike micelles, whereas the viscosity eta(0) showed three domains of growth characterized by scaling laws as the surfactant concentration was varied between 10 and 40 mM. The rapid increase in eta(0) could be explained by an incomplete screening of electrostatic repulsions of the solution. The decrease in eta(0) was due to the formation of branched wormlike micelles above once a concentration [CTAB]=20 mM.

A many-body dissipative particle dynamics study of spontaneous capillary imbibition and drainage.

The spontaneous capillary imbibition and drainage processes are studied using many-body dissipative particle dynamics (MDPD) simulations. By adjusting the solid-liquid interaction parameter, different wetting behavior between the fluid and the capillary wall, corresponding to the static contact angle ranging from 0 degrees to 180 degrees, can be controllably simulated. For wetting fluids, the spontaneous capillary imbibition (SCI) is evident in MDPD simulations. It is found that, whereas the corrected Lucas-Washburn equation (taking into account the dynamic contact angle and the fluid inertia) can well describe the SCI simulation result for the completely wetting fluid, it deviates, to a notable degree, from the results of partly wetting fluids. In particular, this corrected equation cannot be used to describe the spontaneous capillary drainage (SCD) processes. To solve this problem, we derive an improved form of the Lucas-Washburn equation, in which the slip effects of fluid particles at the capillary wall are treated. Such an improved equation turns out to be capable of describing all the simulation results of both the SCI and the SCD. These findings provide new insights into the SCI and SCD processes and improve the mathematical base.

A comparison of spreading behaviors of Silwet L-77 on dry and wet lotus leaves.

Trisiloxane surfactants are widely used in pesticide applications as adjuvants to promote spray drop spreading on leaves. The efficacy of the spray is related to the wetting of plant surfaces. The surface (composite or wetted) formed by the liquid drop instantly contacting with the substrate is vital to the spreading. In this paper the spreading behaviors of surfactant solutions on dry and previous wet lotus leaf surfaces were studied. It was found that the drop spreading on the wet surface was obviously easier than on the dry surface, which was rational to the existence of water in the grooves of the wet surface. The spreading of Silwet L-77 aqueous drops on the wet lotus leaf surface is mainly controlled by the surface tension gradient along the air-liquid interface.

Light-responsive viscoelastic fluids based on anionic wormlike micelles

A new class of light-responsive viscoelastic fluids based on anionic wormlike micelles is reported. The key components are sodium oleate (NaOA) and a cationic azobenzene dye, 1-[2-(4-phenylazo-phenoxy)-ethyl]-3-methylimidazolium bromide (C0AZOC2IMB). These binary systems are gel-like fluids at certain concentration ratios of [C0AZOC2IMB]/[NaOA], e.g. 35/100, owing to the formation of long, entangled wormlike micelles. The viscosity of these fluids can be controlled reversibly by light due to photo isomerization between trans-C0AZOC2IMB and cis-C0AZOC2IMB. For example, the zero-shear viscosity (η0) of an originally gel-like sample is high up to ~1300 Pa s when C0AZOC2IMB is in its trans from, whereas the mixture becomes a Newtonian fluid with η0 about 0.01 Pa s after UV light irradiation. For the post-irradiated cis-C0AZOC2IMB, short cylindrical micelles form, hence accounting for the lower viscosity. Evidence for the structural transition is provided by UV-vis spectra, rheology, (1)H NMR and cryo-transmission electronic microscopy measurements.

Micelle to vesicle transitions of N-dodecyl-1, ω-diaminoalkanes: Effects of pH, temperature and salt

The self-assembly behavior of pH-sensitive amphiphiles N-dodecyl-1, 2-diaminoethane (C12N2N), N-dodecyl-1, 3-diaminopropane (C12N3N) and N-dodecyl-1, 4-diaminobutane (C12N4N) has been studied in aqueous solutions. Light scattering, viscosity and cryo-transmission electronic microscopy (cryo-TEM) results revealed that the aggregates transferred from spherical micelles to vesicles (MVT) via wormlike micelles as the pH was gradually varied from acidic to basic conditions. pH-dependent zeta potential and (1)H NMR studies confirmed these transitions. Interestingly, the formed wormlike micelles could transform into vesicles upon heating, which was studied by cryo-TEM, light scattering and viscosity techniques in detail. It is concluded that the pH and thermal MVT are a general phenomenon in all three amphiphiles investigated. Furthermore, NaCl induced a wormlike micelle to vesicle transition was also observed in C12N2N solution.