Jingwei Xie

Gold nanocages covered by smart polymers for controlled release with near-infrared light

Photosensitive caged compounds have enhanced our ability to address the complexity of biological systems by generating effectors with remarkable spatial/temporal resolutions1-3. The caging effect is typically removed by photolysis with ultraviolet light to liberate the bioactive species. Although this technique has been successfully applied to many biological problems, it suffers from a number of intrinsic drawbacks. For example, it requires dedicated efforts to design and synthesize a precursor compound to the effector. The ultraviolet light may cause damage to biological samples and is only suitable for in vitro studies because of its quick attenuation in tissue4. Here we address these issues by developing a platform based on the photothermal effect of gold nanocages. Gold nanocages represent a class of nanostructures with hollow interiors and porous walls5. They can have strong absorption (for the photothermal effect) in the near-infrared (NIR) while maintaining a compact size. When the surface of a gold nanocage is covered with a smart polymer, the pre-loaded effector can be released in a controllable fashion using a NIR laser. This system works well with various effectors without involving sophiscated syntheses, and is well-suited for in vivo studies due to the high transparency of soft tissue in NIR6.

Understanding the Role of Surface Charges in Cellular Adsorption versus Internalization by Selectively Removing Gold Nanoparticles on the Cell Surface with a I2/KI Etchant

This Letter presents a new method for differentiating the Au nanospheres attached to the cell surface from those being internalized into the cells. We introduced an etching solution based on I2 and KI that can selectively dissolve the Au nanospheres on the cell surface within a short period of time. The advantage of this etchant is its low toxicity to the cells because it is capable of etching away a relatively large amount of Au nanospheres at a low molar concentration. By combining with quantitative elemental analysis, we found that the deposition of Au nanospheres on the surface of cancer cells was highly dependent on the sign of surface charges on the Au nanospheres. In addition, by fitting the uptake data with a kinetic model, we were able to derive the overall and internalization rate constants for Au nanospheres and both of them were found to be governed by the surface charges on Au nanospheres.

THE DIFFERENTIATION OF EMBRYONIC STEM CELLS SEEDED ON ELECTROSPUN NANOFIBERS INTO NEURAL LINEAGES

Due to advances in stem cell biology, embryonic stem (ES) cells can be induced to differentiate into a particular mature cell lineage when cultured as embryoid bodies. Although transplantation of ES cells-derived neural progenitor cells has been demonstrated with some success for either spinal cord injury repair in small animal model, control of ES cell differentiation into complex, viable, higher ordered tissues is still challenging. Mouse ES cells have been induced to become neural progenitors by adding retinoic acid to embryoid body cultures for 4 days. In this study, we examine the use of electrospun biodegradable polymers as scaffolds not only for enhancing the differentiation of mouse ES cells into neural lineages but also for promoting and guiding the neurite outgrowth. A combination of electrospun fiber scaffolds and ES cells-derived neural progenitor cells could lead to the development of a better strategy for nerve injury repair.

Nanofiber Scaffolds with Gradations in Mineral Content for Mimicking the Tendon-to-Bone Insertion Site

We have demonstrated a simple and versatile method for generating a continuously graded, bonelike calcium phosphate coating on a nonwoven mat of electrospun nanofibers. A linear gradient in calcium phosphate content could be achieved across the surface of the nanofiber mat. The gradient had functional consequences with regard to stiffness and biological activity. Specifically, the gradient in mineral content resulted in a gradient in the stiffness of the scaffold and further influenced the activity of mouse preosteoblast MC3T3 cells. This new class of nanofiber-based scaffolds can potentially be employed for repairing the tendon-to-bone insertion site via a tissue engineering approach.

Coating Electrospun Poly(ε-caprolactone) Fibers with Gelatin and Calcium Phosphate and Their Use as Biomimetic Scaffolds for Bone Tissue Engineering

Electrospinning was employed to fabricate fibrous scaffolds of poly(epsilon-caprolactone) in the form of nonwoven mats. The surfaces of the fibers were then coated with gelatin through layer-by-layer self-assembly, followed by functionalization with a uniform coating of bonelike calcium phosphate by mineralization in the 10 times concentrated simulated body fluid for 2 h. Transmission electron microscopy, water contact angle, and scanning electron microscopy measurements confirmed the presence of gelatin and calcium phosphate coating layers, and X-ray diffraction results suggested that the deposited mineral phase was a mixture of dicalcium phosphate dehydrate (a precursor to apatite) and apatite. It was also demonstrated that the incorporation of gelatin promoted nucleation and growth of calcium phosphate. The porous scaffolds could mimic the structure, composition, and biological function of bone extracellular matrix. It was found that the preosteoblastic MC3T3-E1 cells attached, spread, and proliferated well with a flat morphology on the mineralized scaffolds. The proliferation rate of the cells on the mineralized scaffolds was significantly higher (by 1.9-fold) than that on the pristine fibrous scaffolds after culture for 7 days. These results indicated that the hybrid system containing poly(epsilon-caprolactone), gelatin, and calcium phosphate could serve as a new class of biomimetic scaffolds for bone tissue engineering.

Neurite outgrowth on nanofiber scaffolds with different orders, structures, and surface properties.

Electrospun nanofibers can be readily assembled into various types of scaffolds for applications in neural tissue engineering. The objective of this study is to examine and understand the unique patterns of neurite outgrowth from primary dorsal root ganglia (DRG) cultured on scaffolds of electrospun nanofibers having different orders, structures, and surface properties. We found that the neurites extended radially outward from the DRG main body without specific directionality when cultured on a nonwoven mat of randomly oriented nanofibers. In contrast, the neurites preferentially extended along the long axis of fiber when cultured on a parallel array of aligned nanofibers. When seeded at the border between regions of aligned and random nanofibers, the same DRG simultaneously expressed aligned and random neurite fields in response to the underlying nanofibers. When cultured on a double-layered scaffold where the nanofibers in each layer were aligned along a different direction, the neurites were found to be dependent on the fiber density in both layers. This biaxial pattern clearly demonstrates that neurite outgrowth can be influenced by nanofibers in different layers of a scaffold, rather than the topmost layer only. Taken together, these results will provide valuable information pertaining to the design of nanofiber scaffolds for neuroregenerative applications, as well as the effects of topology on neurite outgrowth, growth cone guidance, and axonal regeneration.

Radially Aligned, Electrospun Nanofibers as Dural Substitutes for Wound Closure and Tissue Regeneration Applications

This paper reports the fabrication of scaffolds consisting of radially aligned poly(ε-caprolactone) nanofibers by utilizing a collector composed of a central point electrode and a peripheral ring electrode. This novel class of scaffolds was able to present nanoscale topographic cues to cultured cells, directing and enhancing their migration from the periphery to the center. We also established that such scaffolds could induce faster cellular migration and population than nonwoven mats consisting of random nanofibers. Dural fibroblast cells cultured on these two types of scaffolds were found to express type I collagen, the main extracellular matrix component in dural mater. The type I collagen exhibited a high degree of organization on the scaffolds of radially aligned fibers and a haphazard distribution on the scaffolds of random fibers. Taken together, the scaffolds based on radially aligned, electrospun nanofibers show great potential as artificial dural substitutes and may be particularly useful as biomedical patches or grafts to induce wound closure and/or tissue regeneration.

Controlled delivery of mesenchymal stem cells and growth factors using a nanofiber scaffold for tendon repair.

Outcomes after tendon repair are often unsatisfactory, despite improvements in surgical techniques and rehabilitation methods. Recent studies aimed at enhancing repair have targeted the paucicellular nature of tendon for enhancing repair; however, most approaches for delivering growth factors and cells have not been designed for dense connective tissues such as tendon. Therefore, we developed a scaffold capable of delivering growth factors and cells in a surgically manageable form for tendon repair. Platelet-derived growth factor BB (PDGF-BB), along with adipose-derived mesenchymal stem cells (ASCs), were incorporated into a heparin/fibrin-based delivery system (HBDS). This hydrogel was then layered with an electrospun nanofiber poly(lactic-co-glycolic acid) (PLGA) backbone. The HBDS allowed for the concurrent delivery of PDGF-BB and ASCs in a controlled manner, while the PLGA backbone provided structural integrity for surgical handling and tendon implantation. In vitro studies verified that the cells remained viable, and that sustained growth factor release was achieved. In vivo studies in a large animal tendon model verified that the approach was clinically relevant, and that the cells remained viable in the tendon repair environment. Only a mild immunoresponse was seen at dissection, histologically, and at the mRNA level; fluorescently labeled ASCs and the scaffold were found at the repair site 9days post-operatively; and increased total DNA was observed in ASC-treated tendons. The novel layered scaffold has the potential for improving tendon healing due to its ability to deliver both cells and growth factors simultaneously in a surgically convenient manner.

Neurite outgrowth on electrospun nanofibers with uniaxial alignment: The effects of fiber density, surface coating, and supporting substrate

Electrospun nanofibers with uniaxial alignment have recently gained its popularity as scaffolds for neural tissue engineering. Many studies have demonstrated that the nanofibers could guide the neurites to extend along the direction of alignment, resembling the native hierarchy of the nerve tissue. However, the contact cues provided by the nanofibers can be far more complicated than just guiding the neurites to extend along them. In the current study, we used dorsal root ganglia as a model system to systematically investigate the interactions between neurites and uniaxially aligned nanofibers. We demonstrated, for the first time, that the neurites could not only project along the nanofibers, but also be directed to grow along a direction perpendicular to the aligned nanofibers, depending on the following parameters: (i) the density of nanofibers, (ii) the protein deposited on the surfaces of the nanofibers, and (iii) surface properties of the substrate on which the nanofibers were supported. We also investigated the pharmacological effect of myosin II inhibition on the nanofiber-guided growth of neurites by adding blebbistatin to the culture medium. Our findings offer new insights into the design of nanofiber-based scaffolds for nerve injury repair and will provide new guidelines for the construction of well-defined neuronal network architecture (the so-called neural circuits).

Enhancing the stiffness of electrospun nanofiber scaffolds with a controlled surface coating and mineralization.

A new method was developed to coat hydroxyapatite (HAp) onto electrospun poly(lactic-co-glycolic acid) (PLGA) nanofibers for tendon-to-bone insertion site repair applications. Prior to mineralization, chitosan and heparin were covalently immobilized onto the surface of the fibers to accelerate the nucleation of bone-like HAp crystals. Uniform coatings of HAp were obtained by immersing the nanofiber scaffolds into a modified, 10-fold-concentrated simulated body fluid (m10SBF) for different periods of time. The new method resulted in thicker and denser coatings of mineral on the fibers compared to those produced by previously reported methods. Scanning electron microscopy measurements confirmed the formation of nanoscale HAp particles on the fibers. A mechanical property assessment demonstrated a higher stiffness with respect to previous coating methods. A combination of the nanoscale fibrous structure and bonelike mineral coating could mimic the structure, composition, and function of mineralized tissues.