Jingxian Jiang

Large-scale synthesis of In2S3 nanosheets and their rechargeable lithium-ion battery

The first report concerning the cyclic performance of In2S3 nanosheets electrodes is presented here. These In2S3 nanosheets feature a high reversible capacity of 450 mA h g−1 under a large charging/discharging rate of ca. 1 C (700 mA g−1) after 40 cycles.

Microphase Structure, Crystallization Behavior, and Wettability Properties of Novel Fluorinated Copolymers Poly(perfluoroalkyl acrylate-co-stearyl acrylate) Containing Short Perfluorohexyl Chains

Novel fluorinated copolymers of stearyl acrylate (SA) and (perfluorohexyl)ethyl acrylate (C6A), (perfluorohexyl)ethyl methacrylate (C6MA), 2-[[[[2-(perfluorohexyl)]-sulfonyl]methyl] amino]ethyl acrylate (C6SA), and methacrylate (C6SMA) were synthesized via miniemulsion copolymerization. The extremely hydrophobic monomers perfluoroalkyl acrylate (FA) and SA acted as the reactive costabilizer in the miniemulsion system. The microstructure and surface wetting properties of the copolymers were characterized by (1)H NMR, FT-IR, and dynamic contact angle test. The crystallization behaviors and fine surface structures of the copolymer films were determined by differential scanning calorimetry (DSC) and wide-angle X-ray diffraction (WAXD) analysis. The self-assembled aggregation and roughness of the copolymer films were investigated by atomic force microscopy (AFM). The results showed that the fluorinated side chains interrupted and impeded the crystallizable side chains of SA from forming complete crystals. And the Tm and ΔHf of the copolymers were decreased as a consequence of this effect. The fluorinated side chains in P(C6A/SA) and P(C6MA/SA) arranged between the crystallizable hydrocarbon side chains of SA, while the crystallization structure of fluorinated and nonfluorinated pendant groups existed all at once in copolymers P(C6SA/SA) and P(C6SMA/SA). The four copolymers exhibited very low surface free energy and excellent dynamic water repellency attributed to the restriction of perfluoroalkyl groups combined with crystallization of stearyl pendant groups.

Ultralow Oil-Fouling Heterogeneous Poly(ether sulfone) Ultrafiltration Membrane via Blending with Novel Amphiphilic Fluorinated Gradient Copolymers

A novel amphiphilic fluorinated gradient copolymer was prepared by semibatch reversible addition-fragmentation chain transfer (RAFT) method using poly(ethylene glycol) methyl ether methacrylate (PEGMA) and 3,3,4,4,5,5,6,6,7,7,8,8,8-tridecafluorooctyl acrylate (TFOA) as monomers. The resultant amphiphilic copolymers were then incorporated into the poly(ether sulfone) (PES) to fabricate PES blend membranes via the non-solvent-induced phase separation method (NIPS). During the phase inversion process, both hydrophilic (PEGMA) and low surface energy (TFOA) segments significantly enriched on the membrane surface by surface segregation to form an amphiphilic surface, which was demonstrated by surface wetting properties and X-ray photoelectron spectroscopy (XPS) measurements. According to the filtration experiments of oil-in-water emulsion, the heterogeneous membranes exhibited superior oil-fouling resistant properties, that is, low flux decay (as low as 15.4%) and high flux recovery (almost 100%), compared to the pure PES membrane. The synergistic effect of fouling-resistant and fouling-release mechanisms was found to be responsible for the excellent antifouling capacities. The findings of this study offer a facile and robust strategy for fabricating ultralow oil-fouling membranes that might be used for effective oil/water separation.

Robust liquid-repellent coatings based on polymer nanoparticles with excellent self-cleaning and antibacterial performances

In this work, quaternary ammonium salt (QAS) functionalized fluorinated copolymer tethered hydroxyl groups were synthesized by free radical polymerization. And then novel liquid-repellent and antibacterial nanocomposite coatings were prepared via cross-linking the fluorinated copolymer and poly(urea-formaldehyde) nanoparticles (PUF NPs) containing active methylol groups with hexamethylene diisocyanate. The surface physical and chemical properties of the nanocomposite coating were systematically characterized by a series of measurements, demonstrating that the liquid-repellent surface with a dual hierarchical structure was obtained by the introduction of PUF NPs. The nanocomposite coating displayed superb self-cleaning and liquid-repellent properties, and could also maintain its superhydrophobicity even after 16 abrasion cycles and 20 cycles of cross-cut tape test. Moreover, the nanocomposite coating with over 0.11% surface concentration of N+ exhibited excellent antibacterial activity against Gram-negative Escherichia coli and Gram-positive Staphylococcus aureus. These results conclusively indicated that nanocomposite coatings had great promise for potential application in a wide range of practical fields.

Novel Fluorinated Polymers Containing Short Perfluorobutyl Side Chains and Their Super Wetting Performance on Diverse Substrates.

Because the emission of perfluorooctanoic acid (PFOA) was completely prohibited in 2015, the widely used poly- and perfluoroalkyl substances with long perfluoroalkyl groups must be substituted by environmentally friendly alternatives. In this study, one kind of potential alternative (i.e., fluorinated polymers with short perfluorobutyl side chains) has been synthesized from the prepared monomers {i.e., (perfluorobutyl)ethyl acrylate (C4A), (perfluorobutyl)ethyl methacrylate (C4MA), 2-[[[[2-(perfluorobutyl)]sulfonyl]methyl]amino]ethyl acrylate (C4SA), and methacrylate (C4SMA)}, and the microstructure, super wetting performance, and applications of the synthesized fluorinated polymers were systematically investigated. The thermal and crystallization behaviors of the fluoropolymer films were characterized by differential scanning calorimetry and wide-angle X-ray diffraction analysis, respectively. Dynamic water-repellent models were constructed. The stable low surface energy and dynamic water- and oil-repellent properties of these synthesized fluorinated polymers with short perfluorobutyl side chains were attributed to the synergetic effect of amorphous fluorinated side chains in perfluoroalkyl acrylate and crystalline hydrocarbon pendant groups in stearyl acrylate. Outstanding water- and oil-repellent properties of fabrics and any other substrates could be achieved by a facile dip-coating treatment using a fluorinated copolymer dispersion. As a result, we believe that our prepared fluorinated copolymers are potential candidates to replace the fluoroalkylated polymers with long perfluorinated chains in nonstick and self-cleaning applications in our daily life.