Jinxia Liu

Microbial degradation of polyfluoroalkyl chemicals in the environment: A review

Polyfluoroalkyl chemicals containing perfluoroalkyl moieties have been widely used in numerous industrial and commercial applications. Many polyfluoroalkyl chemicals are potential perfluoroalkyl acid (PFAA) precursors. When they are released to the environment, abiotic and microbial degradation of non-fluorinated functionalities, polyfluoroalkyl and perfluoroalkyl moieties can result in perfluoroalkyl carboxylic (PFCAs) and sulfonic acids (PFSAs), such as perfluorooctanoic acid (PFOA) and perfluorooctane sulfonic acid (PFOS). These highly persistent and ubiquitously detected PFAAs are the subjects of many regulations and actions due to their toxic profiles. In order to confidently evaluate the environmental fate and effects of these precursors and their links to PFSAs and PFCAs, we present the review into the environmental biodegradability studies carried out with microbial culture, activated sludge, soil and sediment in the past decade. First, we propose that the knowledge gap caused by the lack of direct detection of precursor chemicals in environmental samples can be bridged by laboratory investigations of important precursors such as fluorotelomer-based compounds and perfluoroalkane sulfonamido derivatives. Then we evaluate the experimental setups and methodologies, sampling and sample preparation methods, and analytical techniques that have been successfully applied. Third, we provide the most updated knowledge on quantitative and qualitative relationships between precursors and PFSAs or PFCAs, microbial degradation pathways, half-lives of precursors, defluorination potential, and novel degradation intermediates and products. In the end, we identify knowledge gaps and suggest research directions with regard to future biodegradation studies, environmental monitoring and ecotoxicological assessment of perfluoroalkyl and polyfluoroalkyl chemicals.

Production of PFOS from aerobic soil biotransformation of two perfluoroalkyl sulfonamide derivatives.

The continuous production and use in certain parts of the world of perfluoroalkyl sulfonamide derivatives that can degrade to perfluorooctane sulfonic acid (PFOS) has called for better understanding of the environmental fate of these PFOS precursors. Aerobic soil biotransformation of N-ethyl perfluorooctane sulfonamide (EtFOSA, also known as Sulfluramid) was quantitatively investigated in semi-closed soil microcosms over 182 d for the first time. The apparent soil half-life of EtFOSA was 13.9±2.1 d and the yield to PFOS by the end of incubation was 4.0 mol%. A positive identification of a previously suspected degradation product, EtFOSA alcohol, provided strong evidence to determine degradation pathways. The lower mass balance in sterile soil than live soil suggested likely strong irreversible sorption of EtFOSA to the test soil. The aerobic soil biotransformation of a technical grade N-ethyl perfluorooctane sulfonamidoethanol (EtFOSE) was semi-quantitatively examined, and the degradation pathways largely followed those in activated sludge and marine sediments. Aside from PFOS, major degradation products included N-Ethyl perfluorooctane sulfonamidoacetic acid (EtFOSAA), perfluorooctane sulfonamide (FOSA) and perfluorooctane sulfonamide acetic acid (FOSAA). This study confirms that aerobic soil biotransformation of EtFOSE and EtFOSA contributes significantly to the PFOS observed in soil environment, as well as to several highly persistent sulfonamide derivatives frequently detected in biosolid-amended soils and landfill leachates.

Analysis of zwitterionic, cationic, and anionic poly- and perfluoroalkyl surfactants in sediments by liquid chromatography polarity-switching electrospray ionization coupled to high resolution mass spectrometry

A new analytical method is proposed for the determination of a wide span of fluoroalkylated surfactants (PFASs) of various chain lengths and polarities in sediments, including newly-identified compounds such as zwitterionic and cationic PFASs. Extraction conditions were optimized so as to maintain a common preparation procedure for all analytes (recovery range: 60-110%). Instrumental analysis was performed with ultra-high performance liquid chromatography coupled to Orbitrap mass spectrometry through polarity-switching electrospray ionization. Calibration curves with excellent coefficients of determination (R(2)>0.994) were generally obtained over 0.002-10ngg(-1) dry weight (dw) and limits of detection were in the range 0.0006-0.46 ng g(-1) dw. Intra-day precision remained<9% and inter-day precision<23%. While perfluorooctane sulfonate (PFOS) generally prevailed over other perfluoroalkyl acids (PFAAs) in sediments from mainland France, fluorotelomer sulfonamide amines and fluorotelomer sulfonamide betaines were also ubiquitous in these samples, especially in the vicinity of airports wherein firefighting training activities may occur on a regular basis.

Generation of Perfluoroalkyl Acids from Aerobic Biotransformation of Quaternary Ammonium Polyfluoroalkyl Surfactants

The aerobic biotransformation over 180 days of two cationic quaternary ammonium compounds (QACs) with perfluoroalkyl chains was determined in soil microcosms, and biotransformation pathways were proposed. This is the first time that polyfluoroalkyl cationic surfactants used in aqueous film-forming foam (AFFF) formulations were studied for their environmental fate. The biotransformation of perfluorooctaneamido quaternary ammonium salt (PFOAAmS) was characterized by a DT50 value (time necessary to consume half of the initial mass) of 142 days and significant generation of perfluoroalkyl carboxylic acid (PFOA) at a yield of 30 mol % by day 180. The biotransformation of perfluorooctane sulfonamide quaternary ammonium salt (PFOSAmS) was very slow with unobservable change of the spiked mass; yet the generation of perfluorooctanesulfonate (PFOS) at a yield of 0.3 mol % confirmed the biotransformation of PFOSAmS. Three novel biotransformation intermediates were identified for PFOAAmS and three products including perfluorooctane sulfonamide (FOSA) for PFOSAmS through high-resolution mass spectrometry (MS) analysis and t-MS(2) fragmentation. The significantly slower PFOSAmS biotransformation is hypothesized to be due to its stronger sorption to soil owing to a longer perfluoroalkyl chain and a bulkier sulfonyl group, when compared to PFOAAmS. This study has demonstrated that despite overall high stability of QACs and their biocide nature, the ones with perfluoroalkyl chains can be substantially biotransformed into perfluoroalkyl acids in aerobic soil.

Environmental Occurrence of Perfluoroalkyl Acids and Novel Fluorotelomer Surfactants in the Freshwater Fish Catostomus commersonii and Sediments Following Firefighting Foam Deployment at the Lac-Mégantic Railway Accident

On July 6th 2013, an unmanned train laden with almost 8 million liters of crude oil careened off the rails downtown Lac-Mégantic (Québec, Canada). In the aftermath of the derailment accident, the emergency response entailed the deployment of 33 000 L of aqueous film forming foam (AFFF) concentrate that contained proprietary fluorosurfactants. The present study examines the environmental occurrence of perfluoroalkyl acids (PFAAs) and newly identified per and polyfluoroalkyl substances (PFASs) in the benthic fish white sucker (Catostomus commersonii) and sediments from Lake Mégantic and Chaudière River. In sediments, PFAAs displayed relatively low concentrations (∑PFAAs = 0.06-0.5 ng g-1 dw) while the sum of fluorotelomer-based PFASs was in the range < LOD-6.2 ng g-1 dw. Notably, fluorotelomer sulfonamide betaines (8:2-FTAB and 10:2-FTAB), fluorotelomer betaines (9:3-FTB, 11:3-FTB and 9:1:2 FTB) and 6:2 fluorotelomer sulfonate (6:2-FTSA) were ubiquitously identified in the sediment samples surveyed. Levels of PFAAs remained moderate in fish muscle (e.g. , PFOS 0.28-2.1 ng g-1 wet-weight), with little or no differences when comparing 2013 or 2014 fish samples with 2011 archived samples. In contrast, n:2-FTSAs emerged in the immediate weeks or months that followed the accident, as did several betaine-based PFASs (8:2-FTAB, 10:2-FTAB, 9:3-FTB, 11:3-FTB, 7:1:2 FTB and 9:1:2 FTB), observed for the first time in situ. Fluorotelomer thioether amido sulfonate (10:2-FTSAS) and fluorotelomer sulfoxide amido sulfonate (10:2-FTSAS-sulfoxide) were also occasionally reported after the AFFF spill. With time, levels of betaine-based PFASs gradually decreased in fish, possibly indicating attenuation by biodegradation of the fluorine-free moiety, supported by the observation of likely metabolites such as n:3-fluorotelomer carboxylates and n:2-fluorotelomer sulfonamides.

Quantitative analysis of poly- and perfluoroalkyl compounds in water matrices using high resolution mass spectrometry: Optimization for a laser diode thermal desorption method

An alternative analysis technique for the quantitation of 15 poly- and perfluoroalkyl substances (PFASs) in water matrices is reported. Analysis time between each sample was reduced to less than 20s, all target molecules being analyzed in a single run with the use of laser diode thermal desorption atmospheric pressure chemical ionization (LDTD/APCI) coupled with high resolution accurate mass (HRMS) orbitrap mass spectrometry. LDTD optimal settings were investigated using either one-factor-at-a-time or experimental design methodologies, while orbitrap parameters were optimized simultaneously by means of a Box-Behnken design. Following selection of an adequate sample concentration and purification procedure based on solid-phase extraction and graphite clean-up, the method was validated in an influent wastewater matrix. Environmentally significant limits of detection were reported (0.3-4ngL(-1) in wastewater and 0.03-0.2ngL(-1) in surface water) and out of the 15 target analytes, 11 showed excellent accuracies (±20% of the target values) and recovery rates (75-125%). The method was successfully applied to a selection of environmental samples, including wastewater samples in 7 locations across Canada, as well as surface and tap water samples from the Montreal region, providing insights into the degree of PFAS contamination in this area.

Surface modification of activated carbon for enhanced adsorption of perfluoroalkyl acids from aqueous solutions

The objective of the research was to examine the effect of increasing carbon surface basicity on uptake of perfluorooctane sulfonic (PFOS) and carboxylic acids (PFOA) by activated carbon. Granular activated carbons made from coal, coconut shell, wood, and phenolic-polymer-based activated carbon fibers were modified through high-temperature and ammonia gas treatments to facilitate systematical evaluation of the impact of basicity of different origins. Comparison of adsorption isotherms and adsorption distribution coefficients showed that the ammonia gas treatment was more effective than the high-temperature treatment in enhancing surface basicity. The resultant higher point of zero charges and total basicity (measured by total HCl uptake) correlated with improved adsorption affinity for PFOS and PFOA. The effectiveness of surface modification to enhance adsorption varied with carbon raw material. Wood-based carbons and activated carbon fibers showed enhancement by one to three orders of magnitudes while other materials could experience reduction in adsorption towards either PFOS or PFOA.

Assessment of the Influence of Soil Characteristics and Hydrocarbon Fuel Cocontamination on the Solvent Extraction of Perfluoroalkyl and Polyfluoroalkyl Substances

Sites impacted by the use of aqueous film-forming foams (AFFFs) present elevated concentrations of perfluoroalkyl and polyfluoroalkyl substances (PFAS). The characterization of the PFAS contamination at such sites may be greatly complicated by the presence of hydrocarbon cocontaminants and by the large variety of PFAS potentially present in AFFFs. In order to further a more comprehensive characterization of AFFF-contaminated soils, the solvent extraction of PFAS from soil was studied under different conditions. Specifically, the impact of soil properties (textural class, organic matter content) and the presence of hydrocarbon contamination (supplemented in the form of either diesel or crude oil) on PFAS recovery performance was evaluated for two extraction methods [methanol/sodium hydroxide (MeOH/NaOH) and methanol/ammonium hydroxide (MeOH/NH4OH)]. While both methods performed satisfactorily for perfluoroalkyl acids and fluorotelomer sulfonates, the extraction of newly identified surfactants with functionalities such as betaine and quaternary ammonium was improved with the MeOH/NaOH based method. The main factors that were found to influence the extraction efficiency were the soil properties; a high organic matter or clay content was observed to negatively affect the recovery of the newly identified compounds. While the MeOH/NaOH solvent yielded more efficient recovery rates overall, it also entailed the disadvantage of presenting higher detection limits and substantial matrix effects at the instrumental analysis stage, requiring matrix-matched calibration curves. The results discussed herein bear important implications for a more comprehensive and reliable environmental monitoring of PFAS components at AFFF-impacted sites.

Adsorption of perfluoroalkyl acids by carbonaceous adsorbents: Effect of carbon surface chemistry

Adsorption by carbonaceous sorbents is among the most feasible processes to remove perfluorooctane sulfonic (PFOS) and carboxylic acids (PFOA) from drinking and ground waters. However, carbon surface chemistry, which has long been recognized essential for dictating performance of such sorbents, has never been considered for PFOS and PFOA adsorption. Thus, the role of surface chemistry was systematically investigated using sorbents with a wide range in precursor material, pore structure, and surface chemistry. Sorbent surface chemistry overwhelmed physical properties in controlling the extent of uptake. The adsorption affinity was positively correlated carbon surface basicity, suggesting that high acid neutralizing or anion exchange capacity was critical for substantial uptake of PFOS and PFOA. Carbon polarity or hydrophobicity had insignificant impact on the extent of adsorption. Synthetic polymer-based Ambersorb and activated carbon fibers were more effective than activated carbon made of natural materials in removing PFOS and PFOA from aqueous solutions.

Novel Fluoroalkylated Surfactants in Soils Following Firefighting Foam Deployment During the Lac-Mégantic Railway Accident

The derailment of an unmanned train carrying crude oil and subsequent fire in the town of Lac-Mégantic, Quebec, led to the use of 33 000 L of aqueous film forming foam (AFFF) concentrate. While it is known that per- and polyfluoroalkyl substances (PFASs) contained in AFFFs pose a potential environmental and health risk, critical knowledge gaps remain as regards to their environmental fate after release. The accident in Lac-Mégantic provided valuable information regarding the identity and concentration of PFASs present in the soil after the AFFF deployment, as well as their possible transformation over time. The current study analyzed four sets of samples from Lac-Mégantic: soil collected days after the accident from a heavily impacted area, soil sampled two years later from the treatment biopiles, soil collected two years after the accident from downtown Lac-Mégantic, and nonimpacted soil from a nearby area. A total of 33 PFASs were quantified in the soils. The highest observed concentrations correspond to those of 6:2 fluorotelomer sulfonamidoalkyl betaine, 6:2 and 8:2 fluorotelomer sulfonates, and short chain perfluorocarboxylic acids. The soils collected in Lac-Mégantic two years after the accident show a total PFAS concentration that is ∼50 times lower than soils collected in 2013, while the proportion of perfluoroalkyl acids in those samples shows an increase. Qualitative analysis revealed the presence in soil of 55 additional PFASs that had been previously identified in AFFF formulations. The present study highlights the need to perform detailed analysis of AFFF impacted sites, instead of focusing solely on perfluoroalkyl acids.