Jinzhang Liu

Electrochemically exfoliated graphene for electrode films : effect of graphene flake thickness on the sheet resistance and capacitive properties

We present an electrochemical exfoliation method to produce controlled thickness graphene flakes by ultrasound assistance. Bilayer graphene flakes are dominant in the final product by using sonication during the electrochemical exfoliation process, while without sonication the product contains a larger percentage of four-layer graphene flakes. Graphene sheets prepared by using the two procedures are processed into films to measure their respective sheet resistance and optical transmittance. Solid-state electrolyte supercapacitors are made using the two types of graphene films. Our study reveals that films with a higher content of multilayer graphene flakes are more conductive, and their resistance is more easily reduced by thermal annealing, making them suitable as transparent conducting films. The film with higher content of bilayer graphene flakes shows instead higher capacitance when used as electrode in a supercapacitor.

Bending and bundling of metal-free vertically aligned ZnO nanowires due to electrostatic interaction.

Bending and bundling was observed from vertically aligned arrays of ZnO nanowires with flat (0001) top surfaces, which were synthesized using a vapor-phase method without metal catalysts. Sufficient evidence was found to exclude electron-beam bombardment during scanning electron microscopy as a cause for bending and bundling. We attribute the bending and bundling to electrostatic interactions due to charged (0001) polar surfaces, and also discussed the threshold surface charge densities for the bending and bundling based on a simple cantilever-bending model. Some growth features were indicative of the operation of electrostatic interactions during the growth.

Role of graphene oxide liquid crystals in hydrothermal reduction and supercapacitor performance

The formation of liquid crystal (LC) phases in graphene oxide (GO) aqueous solution is utilized to develop high-performance supercapacitors. To investigate the effect of LC formation on the properties of subsequently reduced GO (rGO), we compare films prepared through blade-coating of viscous LC-GO solution and ultrasonic spray-coating of diluted GO aqueous dispersion. After hydrothermal reduction under identical conditions, the films show different morphology, oxygen content, and specific capacitance. Trapped water in the LC GO film plays a role in preventing restacking of sheets and facilitating the removal of oxygenated groups during the reduction process. In device architectures with either liquid or polymer electrolyte, the specific capacitance of the blade-coated film is twice as high as that of the spray-coated one. For a blade-coated film with mass loading of 0.115 mg/cm(2), the specific capacitance reaches 286 F/g in aqueous electrolyte and 263 F/g in gelled electrolyte, respectively. This study suggests a route to pilot-scale production of high-performance graphene supercapacitors through blade-coated LC-GO films.

Synthesis and applications of carbon nanomaterials for energy generation and storage

Summary The world is facing an energy crisis due to exponential population growth and limited availability of fossil fuels. Over the last 20 years, carbon, one of the most abundant materials found on earth, and its allotrope forms such as fullerenes, carbon nanotubes and graphene have been proposed as sources of energy generation and storage because of their extraordinary properties and ease of production. Various approaches for the synthesis and incorporation of carbon nanomaterials in organic photovoltaics and supercapacitors have been reviewed and discussed in this work, highlighting their benefits as compared to other materials commonly used in these devices. The use of fullerenes, carbon nanotubes and graphene in organic photovoltaics and supercapacitors is described in detail, explaining how their remarkable properties can enhance the efficiency of solar cells and energy storage in supercapacitors. Fullerenes, carbon nanotubes and graphene have all been included in solar cells with interesting results, although a number of problems are still to be overcome in order to achieve high efficiency and stability. However, the flexibility and the low cost of these materials provide the opportunity for many applications such as wearable and disposable electronics or mobile charging. The application of carbon nanotubes and graphene to supercapacitors is also discussed and reviewed in this work. Carbon nanotubes, in combination with graphene, can create a more porous film with extraordinary capacitive performance, paving the way to many practical applications from mobile phones to electric cars. In conclusion, we show that carbon nanomaterials, developed by inexpensive synthesis and process methods such as printing and roll-to-roll techniques, are ideal for the development of flexible devices for energy generation and storage – the key to the portable electronics of the future.

Ultraviolet photodetection of flexible ZnO nanowire sheets in polydimethylsiloxane polymer

Summary ZnO nanowires are normally exposed to an oxygen atmosphere to achieve high performance in UV photodetection. In this work we present results on a UV photodetector fabricated using a flexible ZnO nanowire sheet embedded in polydimethylsiloxane (PDMS), a gas-permeable polymer, showing reproducible UV photoresponse and enhanced photoconduction. PDMS coating results in a reduced response speed compared to that of a ZnO nanowire film in air. The rising speed is slightly reduced, while the decay time is prolonged by about a factor of four. We conclude that oxygen molecules diffusing in PDMS are responsible for the UV photoresponse.

Plasmonic effect of annealed gold islands for improving efficiency of organic solar cells

Abstract Embedding metallic nanoparticles in organic solar cells can enhance the photoabsorption through light trapping processes. This paper investigates how gold islands obtained by annealing 1–5 nm thick Au layers affect the photoabsorption. Using finite-difference time-domain simulations, the cell efficiency for various island geometries and thicknesses are analyzed and the properties of the islands for maximal photocurrent are discussed. It is shown that a careful choice of size and concentration of gold islands could contribute to enhance the power conversion efficiencies when compared to standard organic solar cell devices. The conclusions are then compared to experimental data for thermally annealed gold islands in bulk heterojunction solar cells. The results of this paper will contribute to the optimization of plasmonic organic solar cell systems and will pave the way for the development of highly efficient organic solar cell devices.

Supercapacitor Electrodes with Remarkable Specific Capacitance Converted from Hybrid Graphene Oxide/NaCl/Urea Films

A novel approach to improve the specific capacitance of reduced graphene oxide (rGO) films is reported. We combine the aqueous dispersion of liquid-crystalline GO incorporating salt and urea with a blade-coating technique to make hybrid films. After drying, stacked GO sheets mediated by solidified NaCl and urea are hydrothermally reduced, resulting in a nanoporous film consisting of rumpled N-doped rGO sheets. As a supercapacitor electrode, the film exhibits a high gravimetric specific capacitance of 425 F g-1 and a record volumetric specific capacitance of 693 F cm-3 at 1 A g-1 in 1 M H2SO4 aqueous electrolyte when integrated into a symmetric cell. When using Li2SO4 aqueous electrolyte, which can extend the potential window to 1.6 V, the device exhibits high energy densities up to 35 Wh kg-1, and high power densities up to 104 W kg-1. This novel strategy to intercalate solidified chemicals into stacked GO sheets to functionalize them and prevent them from restacking provides a promising route toward supercapacitors with high specific capacitance and energy density.

Fast visible photoresponse of CdS bridging nanowires

CdS nanowires are selectively grown onto patterned Ti/Au electrodes. The nanowires bridging the electrodes act as sensing elements and show fast response to visible lights with energy above the band gap of CdS.