Jiří Šalplachta

Latest improvements in CIEF: From proteins to microorganisms

In recent years, characterization and identification of microorganisms has become very important in different fields of human activity. Conventional laboratory methods are time consuming, laborious, and they may provide both false positive or negative results, especially for closely related microorganisms. On that account, new methods for fast and reliable microbial characterization are of great interest. In particular, capillary electrophoretic techniques have a great potential for characterization of microorganisms due to their unique surface properties. Cell surface proteins play a key role in this respect. Since CIEF represents one of the most efficient techniques for protein separation, it was consequently applied to the analysis of microbial cells. This review describes, after a brief introduction to CIEF of proteins, recent developments in CIEF of diverse microorganisms (viruses, bacteria, yeasts, and fungi). Possible application schemes in human and veterinary medicine as well as in plant protection and in biosecurity are outlined.

Capillary isoelectric focusing of probiotic bacteria from cow's milk in tapered fused silica capillary with off-line matrix-assisted laser desorption/ionization time-of-flight mass spectrometry identification.

In this study, combination of capillary isoelectric focusing (CIEF) in tapered fused silica (FS) capillary with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) is presented as an efficient approach for unambiguous identification of probiotic bacteria in real sample. For this purpose, bacteria within genus Lactobacillus were selected as model bioanalytes and cows milk was selected as a biological sample. CIEF analysis of both the cultivated bacteria and the bacteria in the milk was optimized and isoelectric points characterizing the examined bacteria were subsequently determined independently of the bacterial sample origin. The use of tapered FS capillary significantly enhanced the separation capacity and efficiency of the CIEF analyses performed. In addition, the cell number injected into the tapered FS capillary was quantified and an excellent linearity of the calibration curves was achieved which enabled quantitative analysis of the bacteria by CIEF with UV detection. The minimum detectable number of bacterial cells was 2×10(6) mL(-1). Finally, cows milk spiked with the selected bacterium was analyzed by CIEF in tapered FS capillary, the focused and detected bacterial cells were collected from the capillary, deposited onto the cultivation medium, and identified using MALDI-TOF MS afterward. Our results have revealed that the proposed procedure can be advantageously used for unambiguous identification of probiotic bacteria in a real sample.

Capillary and gel electromigration techniques and MALDI-TOF MS--suitable tools for identification of filamentous fungi.

Microbial strains are now spreading out of their original geographical areas of incidence and previously adequate morphological identification methods often must be accompanied by a phenotypic characterization for the successful microbial identification. The fungal genus Monilinia represents a suitable example. Monilinia species represent important fruit pathogens responsible for major losses in fruit production. Four closely related spp. of Monilinia: Monilinia laxa, Monilinia fructigena, Monilinia fructicola and Monilia polystroma have been yet identified. However, the classical characterization methods are not sufficient for current requirements, especially for phytosanitary purposes. In this study, rapid and reproducible methods have been developed for the characterization of Monilinia spp. based on the utilization of five well-established analytical techniques: CZE, CIEF, gel IEF, SDS-PAGE and MALDI-TOF MS, respectively. The applicability of these techniques for the identification of unknown spores of Monilinia spp. collected from infected fruits was also evaluated. It was found that isoelectric points, migration velocities or the protein patterns can be used as the identification markers in the case of cultivated filamentous fungi. Moreover, the results obtained by capillary electromigration techniques are independent on the host origin of the spores. On the other hand, the host origin of the fungi can play an important role in the precise fungi identification by the other techniques.

MALDI-TOF mass spectrometry of hordeins: rapid approach for identification of malting barley varieties.

A procedure for identification of malting barley varieties using matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) of ethanol-soluble barley proteins (hordeins) is described. The hordeins were first extracted from milled barley grains by several extraction protocols (using different extraction agents and conditions). Hordein extracts were then analyzed directly via MALDI-TOF MS without any preliminary purification or separation step, and the protein profiles of analyzed hordein extracts were compared in order to find out the most suitable extraction procedure for mass spectrometric analysis. The optimized procedure was successfully applied to identification of 13 malting barley varieties. Our results revealed that the proposed mass spectrometry-based approach provides characteristic mass patterns of extracted hordeins, which can be advantageously used for barley variety identification.

Combination of Capillary Isoelectric Focusing in a Tapered Capillary with MALDI-TOF MS for Rapid and Reliable Identification of Dickeya Species from Plant Samples

This study was undertaken to investigate feasibility of a combination of capillary isoelectric focusing (CIEF) in a tapered fused silica (FS) capillary with matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS) for a rapid and reliable identification of bacteria taken from plant-tissue-containing samples. Eight strains representing different species of the genus Dickeya were selected on the basis of close proximity of their isoelectric points: D. chrysanthemi, D. chrysanthemi bv. parthenii, D. chrysanthemi bv. chrysanthemi, D. dadantii, D. paradisiaca, D. solani, D. diffenbachiae, and D. dianthicola. Because the Dickeya species (spp.) cannot be easily discriminated from each other when CIEF is performed in a cylindrical FS capillary (commonly used in CIEF) even if a narrow pH gradient is used, a tapered FS capillary was employed instead, which enabled satisfactory discrimination of the examined bacteria due to enhanced separation efficiency of CIEF in the tapered FS capillary. CIEF in the tapered FS capillary was also successfully used for the detection and characterization of Dickeya spp. in a plant-tissue-containing sample. Then an off-line combination of CIEF with MALDI-TOF MS was employed for rapid and reliable identification of Dickeya spp. in the plant-tissue-containing sample. It was found that the presence of plant tissue did not affect the results, making the proposed procedure very promising with respect to the fast and reliable detection and identification of bacteria in plant-tissue-containing samples.

Use of electrophoretic techniques and MALDI-TOF MS for rapid and reliable characterization of bacteria: Analysis of intact cells, cell lysates, and "washed pellets"

In this study electrophoretic and mass spectrometric analysis of three types of bacterial sample (intact cells, cell lysates, and “washed pellets”) were used to develop an effective procedure for the characterization of bacteria. The samples were prepared from specific bacterial strains. Five strains representing different species of the family Rhizobiaceae were selected as model microorganisms: Rhizobium leguminosarum bv. trifolii, R. leguminosarum bv. viciae, R. galegae, R. loti, and Sinorhizobium meliloti. Samples of bacteria were subjected to analysis by four techniques: capillary zone electrophoresis (CZE), capillary isoelectric focusing (CIEF), gel IEF, and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI–TOF MS). These methods are potential alternatives to DNA-based methods for rapid and reliable characterization of bacteria. Capillary electrophoretic (CZE and CIEF) analysis of intact cells was suitable for characterization of different bacterial species. CIEF fingerprints of “washed pellets” and gel IEF of cell lysates helped to distinguish between closely related bacterial species that were not sufficiently differentiated by capillary electrophoretic analysis of intact cells. MALDI–TOF MS of “washed pellets” enabled more reliable characterization of bacteria than analysis of intact cells or cell lysates. Electrophoretic techniques and MALDI–TOF MS can both be successfully used to complement standard methods for rapid characterization of bacteria.

Preparative isoelectric focusing in a cellulose‐based separation medium

An improved preparative method based on isoelectric focusing of analytes in a cellulose-based separation medium is described in this study. Cellulose is suspended in an aqueous solution of simple buffers, ethylene glycol, glycerol, nonionic surfactant, and colored pI markers. Water partially evaporates during focusing run and the separation takes place in an in situ generated layer of cellulose, which has a gel-like appearance at the end of analysis. Final positions of analytes are indicated by the positions of zones of focused pI markers. Fractions, segments of the separation medium with analytes, can be simply collected by spatula and analyzed by downstream analytical methods. Good focusing ability of the new method and almost quantitative recovery of model proteins, cytochrome c and bovine serum albumin, was verified by gel electrophoresis and capillary isoelectric focusing of the collected fractions.

Capillary electrophoresis in a fused-silica capillary with surface roughness gradient

The electro-osmotic flow, a significant factor in capillary electrophoretic separations, is very sensitive to small changes in structure and surface roughness of the inner surface of fused silica capillary. Besides a number of negative effects, the electro-osmotic flow can also have a positive effect on the separation. An example could be fused silica capillaries with homogenous surface roughness along their entire separation length as produced by etching with supercritical water. Different strains of methicillin-resistant and methicillin-susceptible Staphylococcus aureus were separated on that type of capillaries. In the present study, fused-silica capillaries with a gradient of surface roughness were prepared and their basic behavior was studied in capillary zone electrophoresis with UV-visible detection. First the influence of the electro-osmotic flow on the peak shape of a marker of electro-osmotic flow, thiourea, has been discussed. An antifungal agent, hydrophobic amphotericin B, and a protein marker, albumin, have been used as model analytes. A significant narrowing of the detected zones of the examined analytes was achieved in supercritical-water-treated capillaries as compared to the electrophoretic separation in smooth capillaries. Minimum detectable amounts of 5 ng/mL amphotericin B and 5 μg/mL albumin were reached with this method.

Preparative isoelectric focusing of microorganisms in cellulose-based separation medium and subsequent analysis by CIEF and MALDI-TOF MS

Pre-separation and pre-concentration of bacteria is an important step especially when they are uncultured and bacterial concentration in the matrix is low. This study describes a preparative method based on isoelectric focusing of colored microorganisms in a cellulose-based separation medium from a high conductivity matrix. The isoelectric points found for the examined cells were 1.8 for Micrococcus luteus, 3.5 for Dietzia sp., and 4.7 for Rhodotorula mucilaginosa using capillary isoelectric focusing. The final positions of the zones of colored microbial cells in the cellulose-bed are indicated by colored pI markers. Segments of the separation medium with cells were harvested by a spatula, simply purified using centrifugation and analyzed by capillary isoelectric focusing and matrix-assisted laser desorption/ionization time of flight mass spectrometry. The determined recovery ranged from 78% to 93%. The viability of the harvested cells was verified by their cultivation.

Identification of bacterial uropathogens by preparative isoelectric focusing and matrix-assisted laser desorption/ionization time-of-flight mass spectrometry

This study describes a new method for simultaneous identification of uropathogens in the case of polybacterial urinary tract infections. The method utilizes recently developed preparative isoelectric focusing (IEF) in cellulose-based separation medium with a subsequent analysis by matrix-assisted laser desorption/ionization time-of-flight mass spectrometry (MALDI-TOF MS). Preparative IEF was successfully used for both purification and separation of bacteria, Escherichia coli (pI 4.6) and Staphylococcus aureus (pI 3.4), in urine samples. The focused zones of bacteria, localized by the positions of focused colored pI markers, were easily collected from the separation media after the IEF analysis and then unambiguously identified by MALDI-TOF MS. The proposed method enables the identification of bacteria in urine specimens when the concentration of individual bacteria is ≥104 cells mL-1. Another benefit is the viability of bacteria extracted from the collected fractions after preparative IEF.