Jixiang Li

Insight into chemical phosphate recovery from municipal wastewater.

Phosphate plays an irreplaceable role in the production of fertilizers. However, its finite availability may not be enough to satisfy increasing demands for the fertilizer production worldwide. In this scenario, phosphate recovery can effectively alleviate this problem. Municipal wastewater has received high priority to recover phosphate because its quantity is considerable. Therefore, phosphate recovery from municipal wastewater can bring many benefits such as relieving the burden of increasing production of fertilizers and reduction in occurrence of eutrophication caused by the excessive concentration of phosphate in the released effluent. The chemical processes are the most widely applied in phosphate recovery in municipal wastewater treatment because they are highly stable and efficient, and simple to operate. This paper compares chemical technologies for phosphate recovery from municipal wastewater. As phosphate in the influent is transferred to the liquid and sludge phases, a technical overview of chemical phosphate recovery in both phases is presented with reference to mechanism, efficiency and the main governing parameters. Moreover, an analysis on their applications at plant-scale is also presented. The properties of recovered phosphate and its impact on crops and plants are also assessed with a discussion on the economic feasibility of the technologies.

New and practical mathematical model of membrane fouling in an aerobic submerged membrane bioreactor

This study aimed to develop a practical semi-empirical mathematical model of membrane fouling that accounts for cake formation on the membrane and its pore blocking as the major processes of membrane fouling. In the developed model, the concentration of mixed liquor suspended solid is used as a lumped parameter to describe the formation of cake layer including the biofilm. The new model considers the combined effect of aeration and backwash on the foulants detachment from the membrane. New exponential coefficients are also included in the model to describe the exponential increase of transmembrane pressure that typically occurs after the initial stage of an MBR operation. The model was validated using experimental data obtained from a lab-scale aerobic sponge-submerged membrane bioreactor (MBR), and the simulation of the model agreed well with the experimental findings.

Design and composition of synthetic fungal-bacterial microbial consortia that improve lignocellulolytic enzyme activity

Microbial interactions are important for metabolism as they can improve or reduce metabolic efficiency. To improve lignocellulolytic enzyme activity, a series of synergistic microbial consortia of increasing diversity and complexity were devised using fungal strains, including Trichoderma reesei, Penicillium decumbens, Aspergillus tubingensis, and Aspergillus niger. However, when a screened microbial community with cellulolytic capacity was added to the consortia to increase the number of strains, it engendered more microbial interactions with the above strains and universally improved the β-glucosidase activity of the consortia. Analysis of the microbial community structure revealed that the bacteria in the consortia are more important for lignocellulolytic enzyme activity than the fungi. One fungal and 16 bacterial genera in the consortia may interact with T. reesei and are potential members of a devised synergistic microbial consortium. Such devised microbial consortia may potentially be applied to effectively and economically degrade lignocellulose.

Effects of different cellulases on the release of phenolic acids from rice straw during saccharification

Effects of different cellulases on the release of phenolic acids from rice straw during saccharification were investigated in this study. All cellulases tested increased the contents of phenolic acids during saccharification. However, few free phenolic acids were detected, as they were present in conjugated form after saccharification when the cellulases from Trichoderma reesei, Trichoderma viride and Aspergillus niger were used. On the other hand, phenolic acids were present in free form when the Acremonium cellulolyticus cellulase was used. Assays of enzyme activity showed that, besides high cellulase activity, the A. cellulolyticus cellulase exhibited high feruloyl esterase (FAE) activity. A synergistic interaction between FAE and cellulase led to the increase in free phenolic acids, and thus an increase in antioxidative and antiradical activities of the phenolic acids. Moreover, a cost estimation demonstrated the feasibility of phenolic acids as value-added products to reduce the total production cost of ethanol.

Characterization of a designed synthetic autotrophic–heterotrophic consortia for fixing CO2 without light

Microbial interactions are important for metabolism, and they improve metabolic substrate types and metabolic efficiency. To discover microbial combinations with high CO2 fixation efficiencies, a series of synergistic microbial consortia of increasing diversity and complexity were devised using chemoautotrophic strains, including Ochrobactrum, Stenotrophomonas, Castellaniella, and Sinomicrobium strains, which were isolated from a non-photosynthetic microbial community (NPMC) with CO2 fixation capacity. Addition of a small inocula of NPMC universally improved the CO2 fixation efficiencies of the consortia by up to 10-fold, while the CO2 fixation efficiencies of most multimember consortia were similar to those of single strains. An analysis of the microbial community structure revealed that both autotrophic–autotrophic microbial interactions and autotrophic–heterotrophic microbial interactions occurred in the synthetic microbial consortia. Ochrobactrum and Castellaniella strains were crucial for autotrophic metabolism, while Lysinibacillus and Pseudomonas strains were crucial for heterotrophic metabolism. These devised microbial consortia have potential applications in addressing environmental issues.

Use of magnetic powder to effectively improve the performance of sequencing batch reactors (SBRs) in municipal wastewater treatment

This study aims to investigate the effect of adding magnetic powder in the sequencing batch reactor (SBR) on the reactor performance and microbial community. Results indicated that, the magnetic activated sludge sequencing batch reactor (MAS-SBR) had 7.76% and 4.76% higher ammonia nitrogen (NH4+-N) and chemical oxygen demand (COD) removal efficiencies than that of the conventional SBR (C-SBR). The MAS-SBR also achieved 6.86% sludge reduction compared with the C-SBR. High-throughput sequencing demonstrated that the dominant phyla of both SBRs (present as ≥1% of the sequence reads) were Protebacteria, Bacteroidetes, Chloroflexi, Saccharibacteria, Chlorobi, Firmicutes, Actinobactoria, Acidobacteria, Planctomycetes and unclassified_Bacteria. The relative abundance of Protebacteria and Bacteroidetes simultaneously declined whereas the other 8 phyla increased following the addition of magnetic powder. Adding magnetic powder in the SBR significantly affected the microbial diversity and richness of activated sludge, consequently affecting the reactor performance.

Removal of antibiotics (sulfamethazine, tetracycline and chloramphenicol) from aqueous solution by raw and nitrogen plasma modified steel shavings

The removal of sulfamethazine (SMT), tetracycline (TC) and chloramphenicol (CP) from synthetic wastewater by raw (M3) and nitrogen plasma modified steel shavings (M3-plN2) was investigated using batch experiments. The adsorption kinetics could be expressed by both pseudo-first-order kinetic (PFO) and pseudo-second-order kinetic (PSO) models, where correlation coefficient r2 values were high. The values of PFO rate constant k1p and PSO rate constant k2p decreased as SMT-M3>SMT-M3-plN2>TC-M3-plN2>TC-M3>CP-M3>CP-M3-plN2 and SMT-M3>SMT-M3-plN2>TC-M3>TC-M3-plN2>CP-M3>CP-M3-plN2, respectively. Solution pH, adsorbent dose and temperature exerted great influences on the adsorption process. The plasma modification with nitrogen gas cleaned and enhanced 1.7-fold the surface area and 1.4-fold the pore volume of steel shavings. Consequently, the removal capacity of SMT, TC, CP on the adsorbent rose from 2519.98 to 2702.55, 1720.20 to 2158.36, and 2772.81 to 2920.11μg/g, respectively. Typical chemical states of iron (XPS in Fe2p3 region) in the adsorbents which are mainly responsible for removing antibiotics through hydrogen bonding, electrostatic and non- electrostatic interactions and redox reaction were as follows: Fe3O4/Fe2+, Fe3O4/Fe3+, FeO/Fe2+ and Fe2O3/Fe3+.

Effect of magnetic powder on membrane fouling mitigation and microbial community/composition in membrane bioreactors (MBRs) for municipal wastewater treatment

This study aims to investigate the usefulness of magnetic powder addition in membrane bioreactors (MBRs) for membrane fouling mitigation and its effect on microbial community and composition. The comparison between the two MBRs (one with magnetic powder (MAS-MBR) and one without magnetic powder (C-MBR)) was carried out to treat synthetic municipal wastewater. Results showed that bioflocculation and adsorption of magnetic powder contributed only minimally to membrane fouling mitigation while the slower fouling rate might be ascribed to magnetic bio-effect. The macromolecules (larger than 500u202fkDa and 300-500u202fkDa) of soluble microbial product from the MAS-MBR were reduced by 24.06% and 11.11%, respectively. High-throughput sequencing demonstrated the most abundant genera of biofilm sludge indicated lower abundance in bulk sludge from the MAS-MBR compared to the C-MBR. It is possible that less membrane fouling is connected to reductions in large molecules and pioneer bacteria from bulk sludge.

Utilization of the saccharification residue of rice straw in the preparation of biochar is a novel strategy for reducing CO2 emissions

Once rice straw has been bioconverted into biofuels, it is difficult to further biodegrade or decompose the saccharification residue (mainly lignin). Taking into account the pyrolysis characteristics of lignin, in this study the saccharification residue was used as a raw material for the preparation of biochar (biochar-SR), a potential soil amendment. Biochar was prepared directly from rice straw (biochar-O) with a yield of 32.45u202fg/100u202fg rice straw, whereas 30.14u202fg biochar-SR and 30.46u202fg monosaccharides (including 20.46u202fg glucose, 9.11u202fg xylose, and 0.89u202fg arabinose) were obtained from 100u202fg of rice straw. When added to liquid soil extracts as a soil amendment, almost nothing was released from biochar-SR, whereas numerous dissolved solids (about 70u202fmg/L) were released from biochar-O. Adding a mixture of biochar-SR and autotrophic bacteria improved soil total organic carbon 1.8-fold and increased the transcription levels of cbbL and cbbM, which were 4.76u202f×u202f103 and 3.76u202f×u202f105 times those of the initial blank, respectively. By analyzing the soil microbial community, it was clear that the above mixture favored the growth of CO2-fixing bacteria such as Ochrobactrum. Compared with burning rice straw or preparing biochar-O, the preparation of biochar-SR reduced CO2 emissions by 67.53% or 37.13%, respectively. These results demonstrate that biochar-SR has potential applications in reducing the cost of sustainable energy and addressing environmental issues.