Joan Ramon Rosell

Combined use of MSWI bottom ash and fly ash as aggregate in concrete formulation: Environmental and mechanical considerations

This paper reports the experimental results obtained after casting concrete formulated with different mix proportions of municipal solid waste incineration (MSWI) by-products, bottom ash (BA) and air pollution control fly ash (APCFA), as aggregates. Several tests were performed to determine the properties of the mixed proportions. Mechanical properties of the formulations, such as compressive strength, were also determined, and two different leaching tests were performed to study their environmental effects. Some suitable concrete formulations were obtained for the 95/5 and 90/10 BA/APCFA mix proportions. These formulations showed the highest compressive strength test results, above 15 MPa, and the lowest amount of released trace metals in reference to the leaching test. The leaching mechanisms involved in the release of trace metals for the best formulations were also studied, revealing that the washing-off process may play an important role. Given the experimental data it can be concluded that these concrete mix proportions are suitable for use as non-structural concrete.

Comparative Study of Magnesium By-Products and Vermiculite Formulations to Obtain Fire Resistant Mortars

There exists an increasing concern about the dangers originated in a building in case of fire. In this work the behaviour of vermiculite as aggregate in fireproof mortars was compared with mortars formulated with two magnesium by-products aggregates which undergo an endothermic decomposition. Fire resistance and mechanical properties were evaluated. An optimal mixture of both magnesium by-products as aggregates allows formulating mortars that improve fire resistance at temperatures greater than 450 °C compared with vermiculite mortars. It would be interesting to obtain mortars formulated with magnesium by products and vermiculite to study possible synergic effects.