Joanna Szymanowska-Pułka

Effect of mechanical stress on Zea root apex. I. Mechanical stress leads to the switch from closed to open meristem organization

The effect of mechanical stress on the root apical meristem (RAM) organization of Zea mays was investigated. In the experiment performed, root apices were grown through a narrowing of either circular (variant I) or elliptical (variant II) shape. This caused a mechanical impedance distributed circumferentially or from the opposite sides in variant I and II, respectively. The maximal force exerted by the growing root in response to the impedance reached the value of 0.15 N for variant I and 0.08 N for variant II. Significant morphological and anatomical changes were observed. The changes in morphology depended on the variant and concerned diminishing and/or deformation of the cross-section of the root apex, and buckling and swelling of the root. Anatomical changes, similar in both variants, concerned transformation of the meristem from closed to open, an increase in the number of the cell layers at the pole of the root proper, and atypical oblique divisions of the root cap cells. After leaving the narrowing, a return to both typical cellular organization and morphology of the apex was observed. The results are discussed in terms of three aspects: the morphological response, the RAM reorganization, and mechanical factors. Assuming that the orientation of division walls is affected by directional cues of a tensor nature, the changes mentioned may indicate that a pattern of such cues is modified when the root apex passes through the narrowing, but its primary mode is finally restored.

The tensor-based model for growth and cell divisions of the root apex. II. Lateral root formation

In this work, the formation of the virtual lateral root (VLR) is shown. The VLR is formed using the 2D simulation model of growth and cell divisions based on the concept of growth tensor, specified for radish. Growth is generated by the field of growth rates of an unsteady type (GT field). Principal directions of growth (PDGs) are assumed to define the orientation of cell divisions. Temporal sequences of the VLR formation are a result of an application of the GT field to the polygon meshwork representing cell pattern of already initiated primordium. The computer-generated lateral root (LR) develops realistically, and its cell pattern is vivid and similar to that observed in anatomical sections. The real and virtual LRs show similar cellular organization, both originate from a small group of cells situated in two-cell layers of the pericycle and both layers are engaged in the LR development. The LR formation seems to be controlled at the tensor level and individual cells presumably detect PDGs and obey them in the course of the cell divisions. PDGs are postulated to affect the cellular organization of the LR. Using the method of computer simulations, cellular aspects of the LR morphogenesis are discussed.

Form matters: morphological aspects of lateral root development.

BACKGROUND The crucial role of roots in plant nutrition, and consequently in plant productivity, is a strong motivation to study the growth and functioning of various aspects of the root system. Numerous studies on lateral roots, as a major determinant of the root system architecture, mostly focus on the physiological and molecular bases of developmental processes. Unfortunately, little attention is paid either to the morphological changes accompanying the formation of a lateral root or to morphological defects occurring in lateral root primordia. The latter are observed in some mutants and occasionally in wild-type plants, but may also result from application of external factors. SCOPE AND CONCLUSIONS In this review various morphological aspects of lateral branching in roots are analysed. Morphological events occurring during the formation of a typical lateral root are described. This process involves dramatic changes in the geometry of the developing organ that at early stages are associated with oblique cell divisions, leading to breaking of the symmetry of the cell pattern. Several types of defects in the morphology of primordia are indicated and described. Computer simulations show that some of these defects may result from an unstable field of growth rates. Significant changes in both primary and lateral root morphology may also be a consequence of various mutations, some of which are auxin-related. Examples reported in the literature are considered. Finally, lateral root formation is discussed in terms of mechanics. In this approach the primordium is considered as a physical object undergoing deformation and is characterized by specific mechanical properties.

Principal growth directions in development of the lateral root in Arabidopsis thaliana

BACKGROUND AND AIMS During lateral root development a new meristem is formed within the mother root body. The main objective of this work was to simulate lateral root formation in Arabidopsis thaliana and to study a potential role of the principal directions in this process. Lateral root growth is anisotropic, so that three principal directions of growth can be distinguished within the organ. This suggests a tensorial character of growth and allows for its description by means of the growth tensor method. METHODS First features of the cell pattern of developing lateral roots were analysed in A. thaliana and then a tensorial model for growth and division of cells for this case was specified, assuming an unsteady character of the growth field of the organ. KEY RESULTS Microscopic observations provide evidence that the principal directions of growth are manifested at various developmental stages by oblique cell walls observed in different regions of the primordium. Other significant features observed are atypically shaped large cells at the flanks of young apices, as well as distinct boundaries between the mother root and the primordium. Simulations were performed using a model for growth. In computer-generated sequences the above-mentioned features could be identified. An attempt was made to reconstruct the virtual lateral root that included a consideration of the formation of particular tissue types based on literature data. CONCLUSIONS In the cell pattern of the developing lateral root the principal directions of growth can be recognized through occurrence of oblique cell divisions. In simulation the role of these directions in cell pattern formation was confirmed, only when cells divide with respect to the principal directions can realistic results be obtained.

Epigenetic chromatin modifications in barley after mutagenic treatment

In addition to their normal developmental processes, plants have evolved complex genetic and epigenetic regulatory mechanisms to cope with various environmental stresses. It has been shown that both DNA methylation and histone modifications are involved in DNA damage response to various types of stresses. In this study, we focused on the involvement of two mutagenic agents, chemical (maleic acid hydrazide; MH) and physical (gamma rays), on the global epigenetic modifications of chromatin in barley. Our results indicate that both mutagens strongly influence the level of histone methylation and acetylation. Moreover, we found that gamma irradiation, in contrast to MH, has a more robust influence on the DNA methylation level. This is the first study that brings together mutagenic treatment along with its impact at the level of epigenetic modifications examined using the immunohistochemical method.

Morphological responses of plant roots to mechanical stress

Background Roots are continuously exposed to mechanical pressure and this often results in their morphological modification. Most obvious are changes in the overall form of the root system as well as in the shapes of particular roots. These changes are often accompanied by modifications of the cell pattern and cell morphology. Scope This review focuses on the morphological responses of roots to mechanical stress. Results of early and recent experiments in which roots have been exposed to mechanical pressure are assembled, analysed and discussed. Research applying different experimental sets, obstacles, media of various compactness and structure are reviewed. An effect of the combination of mechanical stresses with other abiotic stresses on roots, and results of estimating the force exerted by the roots are briefly discussed. Possible consequences of the cell pattern rearrangements are considered. Conclusions Several modifications in root morphology are commonly reported: (1) decreased root size, (2) radial swelling accompanied by increased radial dimension of the cortex cell layers and (3) enhanced cap cell sloughing. Nevertheless, because of differences between species and individual plants, a universal scenario for root morphological changes resulting from externally applied pressures is not possible. Thus, knowledge of the root response to mechanical impedance remains incomplete. Studies on the mechanical properties of the root as well as on possible modifications in cell wall structure and composition as the elements responsible for the mechanical properties of the plant tissue are required to understand the response of root tissue as a biomaterial.

Growth rate distribution in the forming lateral root of arabidopsis

BACKGROUND AND AIMS Microscopic observations of lateral roots (LRs) in Arabidopsis thaliana reveal that the cross-sectional shape of the organ changes from its basal to its apical region. The founder cells for LRs are elongated along the parent root axis, and thus from the site of initiation the base of LRs resemble an ellipse. The circumference of the apical part of LRs is usually a circle. The objective of this study was to analyse the characteristics of changes in the growth field of LRs possessing various shapes in their basal regions. METHODS The LRs of the wild type (Col-0) and two transgenic arabidopsis lines were analysed. On the basis of measurements of the long and short diameters (DL and DS, respectively) of the ellipse-like figure representing the bases of particular LRs, their asymmetry ratios (DL/DS) were determined. Possible differences between accessions were analysed by applying statistical methods. KEY RESULTS No significant differences between accessions were detected. Comparisons were therefore made of the maximal, minimal and mean value of the ratio of all the LRs analysed. Taking into consideration the lack of circular symmetry of the basal part, rates of growth were determined at selected points on the surface of LRs by the application of the growth tensor method, a mathematical tool previously applied only to describe organs with rotational symmetry. Maps showing the distribution of growth rates were developed for surfaces of LRs of various asymmetry ratios. CONCLUSIONS The maps of growth rates on the surfaces of LRs having various shapes of the basal part show differences in both the geometry and the manner of growth, thus indicating that the manner of growth of the LR primordium is correlated to its shape. This is the first report of a description of growth of an asymmetric plant organ using the growth tensor method. The mathematical modelling adopted in the study provides new insights into plant organ formation and shape.