Joanna Wawrzynczyk

Poly(3-Hydroxybutyrate) Biosynthesis in the Biofilm of Alcaligenes eutrophus, Using Glucose Enzymatically Released from Pulp Fiber Sludge

ABSTRACT Glucose, enzymatically released from pulp fiber sludge, was combined with inorganic salts and used as a growth medium for Alcaligenes eutrophus, a gram-negative strain producing poly(3-hydroxybutyrate) (PHB). By controlling the concentrations of the inorganic salts in the growth medium, almost 78% of the cell mass was converted to pure PHB. Efforts were made to find conditions for bacterial growth in the form of a biofilm on a cheap and reusable carrier. A number of positively charged carriers were tested, and the anion exchanger DEAE-Sephadex A-25 was chosen as a microcarrier for packed-bed biofilm cultures of A. eutrophus. Conditions for attachment, growth, and detachment were established. Biofilm formation on the microcarrier is strongly dependent on the ionic strength of the attachment medium. In order to achieve formation of the biofilm and its recovery from the microcarrier, the ionic strengths of the attachment and the detachment media were varied. Low ionic strength was tested for attachment, and high ionic strength was tested for detachment. Although biofilm formation in the packed-bed reactor is limited, the volumetric yield of cells based on the void volume of the packed bed is comparable with the batch culture yield.

Solubilisation of sludge by combined chemical and enzymatic treatment

In this study, the effects of cation-binding agents used alone and/or in combination with enzymes on solubilisation of municipal sludge and structure changes were investigated. Formic acid, citric acid, tartaric acid, EDTA, sodium tripolyphosphate (STPP), Zeolite A, sodium fluoride, sodium thiosulphate or sodium silicate were added to both biological and digested sludges. Citric acid (50 mmol/l) released the highest COD, amounting to 8 g/l from bio-sludge and 3 g/l from digested sludge. The highest specific dissolution rate was 0.5 g COD per mmol citric acid. COD released by STPP (50 mmol/l) was 3.3 g/l from bio-sludge and 2 g/l from digested sludge. STPP acted most efficiently to reduce suspended solids, 20% for digested and 40% for bio-sludge. The pre-treatment by the sequestering agents was followed by addition of three glycosidic enzymes. The used enzymes were more effective in hydrolysis of bio-sludge than in hydrolysis of the digested sludge. Additionally, after 4 h of incubation the remained enzymes activities in enzyme treated sludges were improved by up to 20%, indicating high stability of added enzymes.

Enhanced efficiency of industrial-scale anaerobic digestion by the addition of glycosidic enzymes

The results of the action of two glycosidic enzymes added to an anaerobic digester processing mixed wastewater sludge are reported in this paper. The experiment was performed at a continuously operating full-scale wastewater treatment plant during a 6-month period. The addition of the enzyme mixture resulted in improved gas production and dewatering properties. Dewatering experiments, both on enzyme-treated and reference sludge on the local centrifuges, indicated that the carbonaceous matter was decreased by 7% in enzyme-treated sludge, and the average dry solids increased from 27% (reference) to 31% in enzyme-treated sludge. The polymer dosage was decreased from 8 to 5 kg/t dry solids. Additionally, practical experiences were gathered concerning the transformation from static laboratory-scale batch experiments to a dynamic continuous industrial scale setup. Preliminary cost calculations showed beneficial aspects and economical feasibility of enzyme addition to an anaerobic sludge digestion process.