João A. P. Coutinho

Aqueous biphasic systems: a boost brought about by using ionic liquids

During the past decade, ionic-liquid-based Aqueous Biphasic Systems (ABS) have been the focus of a significant amount of research. Based on a compilation and analysis of the data hitherto reported, this critical review provides a judicious assessment of the available literature on the subject. We evaluate the quality of the data and establish the main drawbacks found in the literature. We discuss the main issues which govern the phase behaviour of ionic-liquid-based ABS, and we highlight future challenges to the field. In particular, the effect of the ionic liquid structure and the various types of salting-out agents (inorganic or organic salts, amino acids and carbohydrates) on the phase equilibria of ABS is discussed, as well as the influence of secondary parameters such as temperature and pH. More recent approaches using ionic liquids as additives or as replacements for common salts in polymer-based ABS are also presented and discussed to emphasize the expanding number of aqueous two-phase systems that can actually be obtained. Finally, we address two of the main applications of ionic liquid-based ABS: extraction of biomolecules and other added-value compounds, and their use as alternative approaches for removing and recovering ionic liquids from aqueous media.

Toxicity assessment of various ionic liquid families towards Vibrio fischeri marine bacteria

The increasing interest on the application of ionic liquids (ILs) to a wide range of processes and products has been hampered by a lack of toxicological data, mainly in what concerns novel cations, such as guanidinium, phosphonium, and functionalized and non-functionalized imidazolium-based ILs. The present study reports the toxicity of five guanidinium-, six phosphonium, and six imidazolium-based ILs, towards the luminescent marine bacteria Vibrio fischeri. These new results clearly show that guanidinium-, unlike the imidazolium- and phosphonium-based ILs, do not follow the trend of increasing toxicity with the increase in the alkyl chain length. Moreover, the introduction of oxygenated groups on the alkyl chains, such as ether and ester, leads to a decrease of the toxicity of guanidinium and also imidazolium compounds. In what respects the effect of the different cations, it is possible to recognize that the phosphonium-based ILs seem to be more toxic when compared to the analog imidazolium-based ILs (with the same anion and alkyl chains).

High-Accuracy Vapor Pressure Data of the Extended [CnC1im][Ntf2] Ionic Liquid Series: Trend Changes and Structural Shifts

For the first time, two distinct trends are clearly evidenced for the enthalpies and entropies of vaporization along the [Cnmim][Ntf2] ILs series. The trend shifts observed for Δ(l)(g)H(m)(o) and Δ(l)(g)S(m)(o), which occur at [C6mim][Ntf2], are related to structural modifications. The thermodynamic results reported in the present article constitute the first quantitative experimental evidence of the structural percolation phenomenon and make a significant contribution to better understanding of the relationship among cohesive energies, volatilities, and liquid structures of ionic liquids. A new Knudsen effusion apparatus, combined with a quartz crystal microbalance, was used for the high-accuracy volatility study of the 1-alkyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide series ([Cnmim][Ntf2], where n = 2, 3, 4, 5, 6, 7, 8, 10, 12). Vapor pressures in the (450–500) K temperature range were measured, and the molar standard enthalpies, entropies, and Gibbs energies of vaporization were derived. The thermodynamic parameters of vaporization were reported, along with molecular dynamic simulations of the liquid phase structure, allowing the establishment of a link between the thermodynamic properties and the percolation phenomenon in ILs.

Specific Solvation Interactions of CO2 on Acetate and Trifluoroacetate Imidazolium Based Ionic Liquids at High Pressures

New classes of acidic or basic ionic liquids (ILs) are gaining special attention, since the efficiency of many processes can be enhanced by the judicious manipulation of these properties. The absorption of sour gases can be enhanced by the basic character of the IL. The fluorination of the cation or the anion can also contribute to enhance the gas solubility. In this work these two characteristics are evaluated through the study of the gas-liquid equilibrium of two ionic liquids based on similar anions, 1-butyl-3-methylimidazolium acetate ([C4mim][Ac]) and 1-butyl-3-methylimidazolium trifluoroacetate ([C4mim][TFA]), with carbon dioxide (CO2) at temperatures up to 363 K and pressures up to 76 MPa. The data reported are shown to be thermodynamically consistent. Henrys constants estimated from the experimental data show the solubility of CO2 on the [C4mim][Ac] to be spontaneous unlike in [C4mim][TFA] due to the differences in solvation enthalpies in these systems. Ab initio calculations were performed on simple intermolecular complexes of CO2 with acetate and trifluoroacetate using MP2/6-31G(d) and the G3 and G3MP2 theoretical procedures to understand the interactions between CO2 and the anions. The theoretical study indicates that although both anions exhibit a simultaneous interaction of the two oxygen of the carboxylate group with the CO2, the acetate acts as a stronger Lewis base than the trifluoroacetate. 13C high-resolution and magic angle spinning (HRMAS) NMR spectra provide further evidence for the acid/base solvation mechanism and the stability of the acetate ion on these systems. Further similarities and differences observed between the two anions in what concerns the solvation of CO2 are discussed.

High-performance extraction of alkaloids using aqueous two-phase systems with ionic liquids

Ionic-liquid-based aqueous two-phase systems are great candidates for the replacement of volatile organic compounds in typical liquid–liquid extractions. This work shows clear evidence for the complete extraction of alkaloids such as caffeine and nicotine using a single-step procedure.

Extraction of Biomolecules Using Phosphonium-Based Ionic Liquids + K3PO4 Aqueous Biphasic Systems

Aqueous biphasic systems (ABS) provide an alternative and efficient approach for the extraction, recovery and purification of biomolecules through their partitioning between two liquid aqueous phases. In this work, the ability of hydrophilic phosphonium-based ionic liquids (ILs) to form ABS with aqueous K3PO4 solutions was evaluated for the first time. Ternary phase diagrams, and respective tie-lines and tie-lines length, formed by distinct phosphonium-based ILs, water, and K3PO4 at 298 K, were measured and are reported. The studied phosphonium-based ILs have shown to be more effective in promoting ABS compared to the imidazolium-based counterparts with similar anions. Moreover, the extractive capability of such systems was assessed for distinct biomolecules (including amino acids, food colourants and alkaloids). Densities and viscosities of both aqueous phases, at the mass fraction compositions used for the biomolecules extraction, were also determined. The evaluated IL-based ABS have been shown to be prospective extraction media, particularly for hydrophobic biomolecules, with several advantages over conventional polymer-inorganic salt ABS.

Ionic liquid solutions as extractive solvents for value-added compounds from biomass

In the past few years, the number of studies regarding the application of ionic liquids (ILs) as alternative solvents to extract value-added compounds from biomass has been growing. Based on an extended compilation and analysis of the data hitherto reported, the main objective of this review is to provide an overview on the use of ILs and their mixtures with molecular solvents for the extraction of value-added compounds present in natural sources. The ILs (or IL solutions) investigated as solvents for the extraction of natural compounds, such as alkaloids, flavonoids, terpenoids, lipids, among others, are outlined. The extraction techniques employed, namely solid-liquid extraction, and microwave-assisted and ultrasound-assisted extractions, are emphasized and discussed in terms of extraction yields and purification factors. Furthermore, the evaluation of the IL chemical structure and the optimization of the process conditions (IL concentration, temperature, biomass-solvent ratio, etc.) are critically addressed. Major conclusions on the role of the ILs towards the extraction mechanisms and improved extraction yields are additionally provided. The isolation and recovery procedures of the value-added compounds are ascertained as well as some scattered strategies already reported for the IL solvent recovery and reusability. Finally, a critical analysis on the economic impact versus the extraction performance of IL-based methodologies was also carried out and is here presented and discussed.

Designing ionic liquids: the chemical structure role in the toxicity

Ionic liquids (ILs) are a novel class of solvents with interesting physicochemical properties. Many different applications have been reported for ILs as alternatives to organic solvents in chemical and bioprocesses. Despite the argued advantage of having low vapor pressure, even the most hydrophobic ILs show some degree of solubility in water, allowing their dispersion into aquatic systems and raising concerns on its pollutant potential. Moreover, nowadays most widespread notion concerning the ILs toxicity is that there is a direct relationship with their hydrophobicity/lipophilicity. This work aims at enlarging the currently limited knowledge on ILs toxicity by addressing negative impacts in aquatic ecosystems and investigating the possibility of designing hydrophobic ILs of low ecotoxicity, by the manipulation of their chemical structures. The impact of aromaticity on the toxicity of different cations (pyridinium, piperidinium, pyrrolidinium and imidazolium) and hydrophobic anions (bis(trifluoromethylsulfonyl)imide [NTf2] and hexafluorophosphate [PF6]) was analysed. Concomitantly, several imidazolium-based ILs of the type [CnCmCjim][NTf2] were also studied to evaluate the effects of the position of the alkyl chain on the ILs’ toxicity. For that purpose, standard assays were performed using organisms of different trophic levels, Vibrio fischeri, Pseudokirchneriella subcapitata and Daphnia magna, allowing to evaluate the consistency of the structure–activity relationships across different biological targets. The results here reported suggest the possibility of designing ILs with an enhanced hydrophobic character and lower toxicity, by elimination of their aromatic nature.

Aqueous biphasic systems composed of a water-stable ionic liquid + carbohydrates and their applications†

A water-stable ionic liquid, 1-butyl-3-methylimidazolium trifluoromethanesulfonate, [C4mim][CF3SO3], is herein proposed to be used in the formation of aqueous biphasic systems (ABS) with a large range of mono- and disaccharides, as well as polyols. Binodal curves, tie-lines, and densities and viscosities of the co-existing aqueous phases, were determined for each ternary system. The proposed systems are low-viscous offering enhanced features over conventional polymer-based ABS. In addition, the partitioning of model biomolecules, such as L-tryptophan, caffeine, and β-carotene, was further investigated to ascertain the applicability of such ABS. These systems are particularly interesting in the recovery of bioactive products from natural sources, while the availability of carbon-based sources to cells constitutes a major advantage in separations from fermentative media. Moreover, the use of carbohydrates in ionic-liquid-based ABS constitutes a step forward along the biorefinery concept envisaging sustainable conversions of biomass into a broad spectrum of bio-based products.

Insight into the interactions that control the phase behaviour of new aqueous biphasic systems composed of polyethylene glycol polymers and ionic liquids.

New polyethylene glycol (PEG)/ionic liquid aqueous biphasic systems (ABS) are presented. Distinct pairs of PEG polymers and ionic liquids can induce phase separation in aqueous media when dissolved at appropriate concentrations. Phase diagrams have been determined for a large array of systems at 298, 308 and 323 K. A comparison of the binodal curves allowed the analysis of the tunable structural features of the ionic liquid (i.e., anionic nature, cationic core, cationic alkyl side chain length and functionalisation, and number of alkyl substituents in the cation) and the influence of the molecular weight of the PEG polymer on the ability of these solutes to induce an ABS. It was observed that contrary to typical ABS based on ionic liquids and inorganic salts, in which the phase behaviour is dominated by the formation of the hydration complexes of the ions, the interactions between the PEG polymers and ionic liquids control the phase demixing in the polymer-type ABS studied herein. It is shown that both the ionic liquids and PEG polymers can act as the salting-out species; that is, it is an occurrence that is dependent on the structural features of the ionic liquid. For the first time, PEG/ionic liquid ABS are reported and insight into the major interactions that govern the polymer/ionic liquid phase behaviour in aqueous media are provided. The use of two different nonvolatile and tunable species (i.e., ionic liquids and PEG polymers) to form ABS allows the polarities of the phases to be tailored. Hence, the development of environmentally friendly separation processes that make use of these novel systems is envisaged.