Joel H. Collier

Engineering gene expression and protein synthesis by modulation of nuclear shape

The current understanding of the relationships between cell shape, intracellular forces and signaling, nuclear shape and organization, and gene expression is in its infancy. Here we introduce a method for investigating gene-specific responses in individual cells with controlled nuclear shape and projected area. The shape of the nuclei of primary osteogenic cells were controlled on microfabricated substrata with regiospecific chemistry by confining attachment and spreading of isolated cells on adhesive islands. Gene expression and protein synthesis were altered by changing nuclear shape. Collagen I synthesis correlated directly with cell shape and nuclear shape index (NSI), where intermediate values of nuclear distension (6 < NSI < 8) promoted maximum synthesis. Osteocalcin mRNA, a bone-specific differentiation marker, was observed intracellularly by using reverse transcription in situ PCR at 4 days in cells constrained by the pattern and not detected in unconstrained cells of similar projected area, but different NSI. Our data supports the concept of gene expression and protein synthesis based on optimal distortion of the nucleus, possibly altering transcription factor affinity for DNA, transport to the nucleus, or nuclear matrix organization. The combination of microfabricated surfaces, reverse transcription in situ PCR, and NSI measurement is an excellent system to study how transcription factors, the nuclear matrix, and the cytoskeleton interact to control gene expression and may be useful for studying a wide variety of other cell shape/gene expression relationships.

A self-assembling peptide acting as an immune adjuvant

The development of vaccines and other immunotherapies has been complicated by heterogeneous antigen display and the use of incompletely defined immune adjuvants with complex mechanisms of action. We have observed strong antibody responses in mice without the coadministration of any additional adjuvant by noncovalently assembling a T and B cell epitope peptide into nanofibers using a short C-terminal peptide extension. Self-assembling peptides have been explored recently as scaffolds for tissue engineering and regenerative medicine, but our results indicate that these materials may also be useful as chemically defined adjuvants. In physiological conditions, these peptides self-assembled into long, unbranched fibrils that displayed the epitope on their surfaces. IgG1, IgG2a, and IgG3 were raised against epitope-bearing fibrils in levels similar to the epitope peptide delivered in complete Freund’s adjuvant (CFA), and IgM production was even greater for the self-assembled epitope. This response was dependent on self-assembly, and the self-assembling sequence was not immunogenic by itself, even when delivered in CFA. Undetectable levels of interferon-gamma, IL-2, and IL-4 in cultures of peptide-challenged splenocytes from immunized mice suggested that the antibody responses did not involve significant T cell help.

Synthesis and characterization of polypyrrole–hyaluronic acid composite biomaterials for tissue engineering applications

New tissue engineering technologies will rely on biomaterials that physically support tissue growth and stimulate specific cell functions. The goal of this study was to create a biomaterial that combines inherent biological properties which can specifically trigger desired cellular responses (e.g., angiogenesis) with electrical properties which have been shown to improve the regeneration of several tissues including bone and nerve. To this end, composites of the biologically active polysaccharide hyaluronic acid (HA) and the electrically conducting polymer polypyrrole (PP) were synthesized and characterized. Electrical conductivity of the composite biomaterial (PP/HA) was measured by a four-point probe technique, scanning electron microscopy was used to characterize surface topography, X-ray photoelectron spectroscopy and reflectance infrared spectroscopy were used to evaluate surface and bulk chemistry, and an assay with biotinylated hyaluronic acid binding protein was used to determine surface HA content. PP/HA materials were also evaluated for in vitro cell compatibility and tissue response in rats. Smooth, conductive, HA-containing PP films were produced; these films retained HA on their surfaces for several days in vitro and promoted vascularization in vivo. PP/HA composite biomaterials are promising candidates for tissue engineering and wound-healing applications that may benefit from both electrical stimulation and enhanced vascularization.

Multi-component extracellular matrices based on peptide self-assembly

Extracellular matrices (ECMs) are challenging design targets for materials synthesis because they serve multiple biological roles, and they are composed of multiple molecular constituents. In addition, their composition and activities are dynamic and variable between tissues, and they are difficult to study mechanistically in physiological contexts. Nevertheless, the design of synthetic ECMs is a central consideration in applications such as regenerative medicine and 3D cell culture. In order to produce synthetic matrices having both multi-component construction and high levels of compositional definition, strategies based on molecular self-assembly are receiving increasing interest. These approaches are described in this tutorial review and compared with the structures and processes in native ECMs that serve as their inspiration.

Modulating adaptive immune responses to peptide self-assemblies.

Self-assembling peptides and peptide derivatives have received significant interest for several biomedical applications, including tissue engineering, wound healing, cell delivery, drug delivery, and vaccines. This class of materials has exhibited significant variability in immunogenicity, with many peptides eliciting no detectable antibody responses but others eliciting very strong responses without any supplemental adjuvants. Presently, strategies for either avoiding strong antibody responses or specifically inducing them are not well-developed, even though they are critical for the use of these materials both within tissue engineering and within immunotherapies. Here, we investigated the molecular determinants and immunological mechanisms leading to the significant immunogenicity of the self-assembling peptide OVA-Q11, which has been shown previously to elicit strong antibody responses in mice. We show that these responses can last for at least a year. Using adoptive transfer experiments and T cell knockout models, we found that these strong antibody responses were T cell-dependent, suggesting a route for avoiding or ensuring immunogenicity. Indeed, by deleting amino acid regions in the peptide recognized by T cells, immunogenicity could be significantly diminished. Immunogenicity could also be attenuated by mutating key residues in the self-assembling domain, thus preventing fibrillization. A second self-assembling peptide, KFE8, was also nonimmunogenic, but nanofibers of OVA-KFE8 elicited strong antibody responses similar to OVA-Q11, indicating that the adjuvant action was not dependent on the specific self-assembling peptide sequence. These findings will facilitate the design of self-assembled peptide biomaterials, both for applications where immunogenicity is undesirable and where it is advantageous.

Gradated assembly of multiple proteins into supramolecular nanomaterials

Biomaterials displaying precise ratios of different bioactive protein components are critical for applications ranging from vaccines to regenerative medicine, but their design is often hindered by limited choices and cross-reactivity of protein conjugation chemistries. Here, we describe a strategy for inducing multiple different expressed proteins of choice to assemble into nanofibers and gels with exceptional compositional control. The strategy employs novel “βTail” tags, which allow for good protein expression in bacteriological cultures, yet can be induced to co-assemble into nanomaterials when mixed with additional β-sheet fibrillizing peptides. Multiple different βTail fusion proteins could be inserted into peptide nanofibers alone or in combination at predictable, smoothly gradated concentrations, providing a simple yet versatile route to install precise combinations of proteins into nanomaterials. The technology is illustrated by achieving precisely targeted hues using mixtures of fluorescent proteins, by creating nanofibers bearing enzymatic activity, and by adjusting antigenic dominance in vaccines.

Self-assembled peptide nanofibers raising durable antibody responses against a malaria epitope.

Biomaterials that modulate innate and adaptive immune responses are receiving increasing interest as adjuvants for eliciting protective immunity against a variety of diseases. Previous results have indicated that self-assembling β-sheet peptides, when fused with short peptide epitopes, can act as effective adjuvants and elicit robust and long-lived antibody responses. Here we investigated the mechanism of immunogenicity and the quality of antibody responses raised by a peptide epitope from Plasmodium falciparum circumsporozoite (CS) protein, (NANP)(3),conjugated to the self-assembling peptide domain Q11. The mechanism of adjuvant action was investigated in knockout mice with impaired MyD88, NALP3, TLR-2, or TLR-5 function, and the quality of antibodies raised against (NANP)(3)-Q11 was assessed using a transgenic sporozoite neutralizing (TSN) assay for malaria infection. (NANP)(3)-Q11 self-assembled into nanofibers, and antibody responses lasted up to 40 weeks in C57BL/6 mice. The antibody responses were T cell- and MyD88-dependent. Sera from mice primed with either irradiated sporozoites or a synthetic peptide, (T1BT*)(4)-P3C, and boosted with (NANP)(3)-Q11 showed significant increases in antibody titers and significant inhibition of sporozoite infection in TSN assays. In addition, two different epitopes could be self-assembled together without compromising the strength or duration of the antibody responses raised against either of them, making these materials promising platforms for self-adjuvanting multi-antigenic immunotherapies.

Multifactorial optimization of endothelial cell growth using modular synthetic extracellular matrices

Extracellular matrices (ECMs) are complex materials, containing at least dozens of different macromolecules that are assembled together, thus complicating their optimization towards applications in 3D cell culture or tissue engineering. The natural complexity of ECMs has limited cell-matrix investigations predominantly to experiments where only one matrix component is adjusted at a time, making it difficult to uncover interactions between different matrix components or to efficiently determine optimal matrix compositions for specific desired biological responses. Here we have developed modular synthetic ECMs based on peptide self-assembly whose incorporation of multiple different peptide ligands can be adjusted. The peptides can co-assemble in a wide range of combinations to form hydrogels of uniform morphology and consistent mechanical properties, but with precisely varied mixtures of peptide ligands. The modularity of this system in turn enabled multi-factorial experimental designs for investigating interactions between these ligands and for determining a multi-peptide matrix formulation that maximized endothelial cell growth. In cultures of HUVECs, we observed a previously unknown antagonistic interaction between the laminin-derived peptide YIGSR and RGDS-mediated cell attachment and growth. We also identified an optimized combination of self-assembled peptides bearing the ligands RGDS and IKVAV that led to endothelial cell growth equivalent to that on native full-length fibronectin. Both of these findings would have been challenging to uncover using more traditional one-factor-at-a-time analyses.

Self-Assembling Peptide-Polymer Hydrogels Designed From the Coiled Coil Region of Fibrin

Biomaterials constructed from self-assembling peptides, peptide derivatives, and peptide-polymer conjugates are receiving increasing attention as defined matrices for tissue engineering, controlled therapeutic release, and in vitro cell expansion, but many are constructed from peptide structures not typically found in the human extracellular matrix. Here we report a self-assembling biomaterial constructed from a designed peptide inspired by the coiled coil domain of human fibrin, the major protein constituent of blood clots and the provisional scaffold of wound healing. Targeted substitutions were made in the residues forming the interface between coiled coil strands for a 37-amino acid peptide from human fibrinogen to stabilize the coiled coil peptide bundle, while the solvent-exposed residues were left unchanged to provide a surface similar to that of the native protein. This peptide, which self-assembled into coiled coil dimers and tetramers, was then used to produce triblock peptide-PEG-peptide bioconjugates that self-assembled into viscoelastic hydrogel biomaterials.

Supramolecular peptide vaccines: tuning adaptive immunity.

Successful immunotherapies must be designed to elicit targeted immune responses having a specifiable phenotype across many dimensions, including the phenotypes of T cells, B cells, antigen-presenting cells, and others. For synthetic or subunit vaccines, stimulation of strong enough immune responses usually requires adjuvants, which can cause local inflammation and complicate the targeting of such phenotypes. Supramolecular materials provide routes for reducing or eliminating supplemental adjuvants. Owing to their compositional controllability, supramolecular assemblies show promise for fine-tuning immune responses by adjusting combinations of material attributes including epitope content, multivalency, size, dose, and small quantities of specific adjuvants. Here we focus on supramolecular vaccines incorporating multiple epitopes in precise ratios, with an emphasis on peptides that form high-aspect ratio (i.e. fibrillar) structures.