Johannah Sanchez-Adams

Cartilage tissue engineering using differentiated and purified induced pluripotent stem cells

The development of regenerative therapies for cartilage injury has been greatly aided by recent advances in stem cell biology. Induced pluripotent stem cells (iPSCs) have the potential to provide an abundant cell source for tissue engineering, as well as generating patient-matched in vitro models to study genetic and environmental factors in cartilage repair and osteoarthritis. However, both cell therapy and modeling approaches require a purified and uniformly differentiated cell population to predictably recapitulate the physiological characteristics of cartilage. Here, iPSCs derived from adult mouse fibroblasts were chondrogenically differentiated and purified by type II collagen (Col2)-driven green fluorescent protein (GFP) expression. Col2 and aggrecan gene expression levels were significantly up-regulated in GFP+ cells compared with GFP− cells and decreased with monolayer expansion. An in vitro cartilage defect model was used to demonstrate integrative repair by GFP+ cells seeded in agarose, supporting their potential use in cartilage therapies. In chondrogenic pellet culture, cells synthesized cartilage-specific matrix as indicated by high levels of glycosaminoglycans and type II collagen and low levels of type I and type X collagen. The feasibility of cell expansion after initial differentiation was illustrated by homogenous matrix deposition in pellets from twice-passaged GFP+ cells. Finally, atomic force microscopy analysis showed increased microscale elastic moduli associated with collagen alignment at the periphery of pellets, mimicking zonal variation in native cartilage. This study demonstrates the potential use of iPSCs for cartilage defect repair and for creating tissue models of cartilage that can be matched to specific genetic backgrounds.

The structure and function of the pericellular matrix of articular cartilage.

Chondrocytes in articular cartilage are surrounded by a narrow pericellular matrix (PCM) that is both biochemically and biomechanically distinct from the extracellular matrix (ECM) of the tissue. While the PCM was first observed nearly a century ago, its role is still under investigation. In support of early hypotheses regarding its function, increasing evidence indicates that the PCM serves as a transducer of biochemical and biomechanical signals to the chondrocyte. Work over the past two decades has established that the PCM in adult tissue is defined biochemically by several molecular components, including type VI collagen and perlecan. On the other hand, the biomechanical properties of this structure have only recently been measured. Techniques such as micropipette aspiration, in situ imaging, computational modeling, and atomic force microscopy have determined that the PCM exhibits distinct mechanical properties as compared to the ECM, and that these properties are influenced by specific PCM components as well as disease state. Importantly, the unique relationships among the mechanical properties of the chondrocyte, PCM, and ECM in different zones of cartilage suggest that this region significantly influences the stress-strain environment of the chondrocyte. In this review, we discuss recent advances in the measurement of PCM mechanical properties and structure that further increase our understanding of PCM function. Taken together, these studies suggest that the PCM plays a critical role in controlling the mechanical environment and mechanobiology of cells in cartilage and other cartilaginous tissues, such as the meniscus or intervertebral disc.

Scaffold-mediated lentiviral transduction for functional tissue engineering of cartilage.

Significance Engineered replacements for musculoskeletal tissues generally require extensive ex vivo manipulation of stem cells to achieve controlled differentiation and phenotypic stability. The ability to control cell differentiation using cell-instructive scaffolds that have biomechanical properties approximating those of native tissue would represent a transformative advance in functional tissue engineering. The goal of this study was to develop a bioactive scaffold capable of mediating cell differentiation and formation of an extracellular matrix with the biochemical composition and mechanical features that mimic native tissue properties. By combining innovative gene delivery strategies with advanced biomaterial design, we demonstrate the feasibility of generating constructs capable of restoring biological and mechanical function. The ability to develop tissue constructs with matrix composition and biomechanical properties that promote rapid tissue repair or regeneration remains an enduring challenge in musculoskeletal engineering. Current approaches require extensive cell manipulation ex vivo, using exogenous growth factors to drive tissue-specific differentiation, matrix accumulation, and mechanical properties, thus limiting their potential clinical utility. The ability to induce and maintain differentiation of stem cells in situ could bypass these steps and enhance the success of engineering approaches for tissue regeneration. The goal of this study was to generate a self-contained bioactive scaffold capable of mediating stem cell differentiation and formation of a cartilaginous extracellular matrix (ECM) using a lentivirus-based method. We first showed that poly-l-lysine could immobilize lentivirus to poly(ε-caprolactone) films and facilitate human mesenchymal stem cell (hMSC) transduction. We then demonstrated that scaffold-mediated gene delivery of transforming growth factor β3 (TGF-β3), using a 3D woven poly(ε-caprolactone) scaffold, induced robust cartilaginous ECM formation by hMSCs. Chondrogenesis induced by scaffold-mediated gene delivery was as effective as traditional differentiation protocols involving medium supplementation with TGF-β3, as assessed by gene expression, biochemical, and biomechanical analyses. Using lentiviral vectors immobilized on a biomechanically functional scaffold, we have developed a system to achieve sustained transgene expression and ECM formation by hMSCs. This method opens new avenues in the development of bioactive implants that circumvent the need for ex vivo tissue generation by enabling the long-term goal of in situ tissue engineering.

Electrospun cartilage-derived matrix scaffolds for cartilage tissue engineering.

Macroscale scaffolds created from cartilage-derived matrix (CDM) demonstrate chondroinductive or chondro-inductive properties, but many fabrication methods do not allow for control of nanoscale architecture. In this regard, electrospun scaffolds have shown significant promise for cartilage tissue engineering. However, nanofibrous materials generally exhibit a relatively small pore size and require techniques such as multilayering or the inclusion of sacrificial fibers to enhance cellular infiltration. The objectives of this study were (1) to compare multilayer to single-layer electrospun poly(ɛ-caprolactone) (PCL) scaffolds for cartilage tissue engineering, and (2) to determine whether incorporation of CDM into the PCL fibers would enhance chondrogenesis by human adipose-derived stem cells (hASCs). PCL and PCL-CDM scaffolds were prepared by sequential collection of 60 electrospun layers from the surface of a grounded saline bath into a single scaffold, or by continuous electrospinning onto the surface of a grounded saline bath and harvest as a single-layer scaffold. Scaffolds were seeded with hASCs and evaluated over 28 days in culture. The predominant effects on hASCs of incorporation of CDM into scaffolds were to stimulate sulfated glycosaminoglycan synthesis and COL10A1 gene expression. Compared with single-layer scaffolds, multilayer scaffolds enhanced cell infiltration and ACAN gene expression. However, compared with single-layer constructs, multilayer PCL constructs had a much lower elastic modulus, and PCL-CDM constructs had an elastic modulus approximately 1% that of PCL constructs. These data suggest that multilayer electrospun constructs enhance homogeneous cell seeding, and that the inclusion of CDM stimulates chondrogenesis-related bioactivity.

The Mechanobiology of Articular Cartilage: Bearing the Burden of Osteoarthritis

Articular cartilage injuries and degenerative joint diseases are responsible for progressive pain and disability in millions of people worldwide, yet there is currently no treatment available to restore full joint functionality. As the tissue functions under mechanical load, an understanding of the physiologic or pathologic effects of biomechanical factors on cartilage physiology is of particular interest. Here, we highlight studies that have measured cartilage deformation at scales ranging from the macroscale to the microscale, as well as the responses of the resident cartilage cells, chondrocytes, to mechanical loading using in vitro and in vivo approaches. From these studies, it is clear that there exists a complex interplay among mechanical, inflammatory, and biochemical factors that can either support or inhibit cartilage matrix homeostasis under normal or pathologic conditions. Understanding these interactions is an important step toward developing tissue engineering approaches and therapeutic interventions for cartilage pathologies, such as osteoarthritis.

Lysyl hydroxylase 2 induces a collagen cross-link switch in tumor stroma

Epithelial tumor metastasis is preceded by an accumulation of collagen cross-links that heighten stromal stiffness and stimulate the invasive properties of tumor cells. However, the biochemical nature of collagen cross-links in cancer is still unclear. Here, we postulated that epithelial tumorigenesis is accompanied by changes in the biochemical type of collagen cross-links. Utilizing resected human lung cancer tissues and a p21CIP1/WAF1-deficient, K-rasG12D-expressing murine metastatic lung cancer model, we showed that, relative to normal lung tissues, tumor stroma contains higher levels of hydroxylysine aldehyde-derived collagen cross-links (HLCCs) and lower levels of lysine aldehyde-derived cross-links (LCCs), which are the predominant types of collagen cross-links in skeletal tissues and soft tissues, respectively. Gain- and loss-of-function studies in tumor cells showed that lysyl hydroxylase 2 (LH2), which hydroxylates telopeptidyl lysine residues on collagen, shifted the tumor stroma toward a high-HLCC, low-LCC state, increased tumor stiffness, and enhanced tumor cell invasion and metastasis. Together, our data indicate that LH2 enhances the metastatic properties of tumor cells and functions as a regulatory switch that controls the relative abundance of biochemically distinct types of collagen cross-links in the tumor stroma.

Atomic force microscopy reveals regional variations in the micromechanical properties of the pericellular and extracellular matrices of the meniscus.

Regional variations in the composition and architecture of the extracellular matrix (ECM) and pericellular matrix (PCM) of the knee meniscus play important roles in determining the local mechanical environment of meniscus cells. In this study, atomic force microscopy was used to spatially map the mechanical properties of matched ECM and perlecan‐labeled PCM sites within the outer, middle, and inner porcine medial meniscus, and to evaluate the properties of the proximal surface of each region. The elastic modulus of the PCM was significantly higher in the outer region (151.4 ± 38.2 kPa) than the inner region (27.5 ± 8.8 kPa), and ECM moduli were consistently higher than region‐matched PCM sites in both the outer (320.8 ± 92.5 kPa) and inner (66.1 ± 31.4 kPa) regions. These differences were associated with a higher proportion of aligned collagen fibers and lower glycosaminoglycan content in the outer region. Regional variations in the elastic moduli and some viscoelastic properties were observed on the proximal surface of the meniscus, with the inner region exhibiting the highest moduli overall. These results indicate that matrix architecture and composition play an important role in the regional micromechanical properties of the meniscus, suggesting that the local stress–strain environment of meniscal cells may vary significantly among the different regions.

Type VI Collagen Regulates Pericellular Matrix Properties, Chondrocyte Swelling, and Mechanotransduction in Mouse Articular Cartilage

Mechanical factors play a critical role in the physiology and pathology of articular cartilage, although the mechanisms of mechanical signal transduction are not fully understood. We undertook this study to test the hypothesis that type VI collagen is necessary for mechanotransduction in articular cartilage by determining the effects of type VI collagen knockout on the activation of the mechano‐osmosensitive, calcium‐permeable channel TRPV4 (transient receptor potential vanilloid channel 4) as well as on osmotically induced chondrocyte swelling and pericellular matrix (PCM) mechanical properties.

Use of cartilage derived from murine induced pluripotent stem cells for osteoarthritis drug screening.

The discovery of novel disease‐modifying drugs for osteoarthritis (OA) is limited by the lack of adequate genetically defined cartilage tissues for application in high‐throughput screening systems. We addressed this need by synthesizing cartilage from induced pluripotent stem cells (iPSCs) to establish and validate an in vitro model of OA.

Collagen VI regulates pericellular matrix properties, chondrocyte swelling, and mechanotransduction in articular cartilage

Mechanical factors play a critical role in the physiology and pathology of articular cartilage, although the mechanisms of mechanical signal transduction are not fully understood. We undertook this study to test the hypothesis that type VI collagen is necessary for mechanotransduction in articular cartilage by determining the effects of type VI collagen knockout on the activation of the mechano‐osmosensitive, calcium‐permeable channel TRPV4 (transient receptor potential vanilloid channel 4) as well as on osmotically induced chondrocyte swelling and pericellular matrix (PCM) mechanical properties.