Johannes Funken

Lower extremity kinematics of athletics curve sprinting

Abstract Curve running requires the generation of centripetal force altering the movement pattern in comparison to the straight path run. The question arises which kinematic modulations emerge while bend sprinting at high velocities. It has been suggested that during curve sprints the legs fulfil different functions. A three-dimensional motion analysis (16 high-speed cameras) was conducted to compare the segmental kinematics of the lower extremity during the stance phases of linear and curve sprints (radius: 36.5 m) of six sprinters of national competitive level. Peak joint angles substantially differed in the frontal and transversal plane whereas sagittal plane kinematics remained unchanged. During the prolonged left stance phase (left: 107.5 ms, right: 95.7 ms, straight: 104.4 ms) the maximum values of ankle eversion (left: 12.7°, right: 2.6°, straight: 6.6°), hip adduction (left: 13.8°, right: 5.5°, straight: 8.8°) and hip external rotation (left: 21.6°, right: 12.9°, straight: 16.7°) were significantly higher. The inside leg seemed to stabilise the movement in the frontal plane (eversion–adduction strategy) whereas the outside leg provided and controlled the motion in the horizontal plane (rotation strategy). These results extend the principal understanding of the effects of curve sprinting on lower extremity kinematics. This helps to increase the understanding of nonlinear human bipedal locomotion, which in turn might lead to improvements in athletic performance and injury prevention.

Musculoskeletal modelling of the dragonfly mandible system as an aid to understanding the role of single muscles in an evolutionary context

ABSTRACT Insects show a great variety of mouthpart and muscle configurations; however, knowledge of their mouthpart kinematics and muscle activation patterns is fragmentary. Understanding the role of muscle groups during movement and comparing them between insect groups could yield insights into evolutionary patterns and functional constraints. Here, we developed a mathematical inverse dynamic model including distinct muscles for an insect head–mandible–muscle complex based on micro-computed tomography (µCT) data and bite force measurements. With the advent of µCT, it is now possible to obtain precise spatial information about muscle attachment areas and head capsule construction in insects. Our model shows a distinct activation pattern for certain fibre groups potentially related to a geometry-dependent optimization. Muscle activation patterns suggest that intramandibular muscles play a minor role in bite force generation, which is a potential reason for their loss in several lineages of higher insects. Our model is in agreement with previous studies investigating fast and slow muscle fibres and is able to resolve the spatio-temporal activation patterns of these different muscle types in insects. The model used here has a high potential for large-scale comparative analyses on the role of different muscle setups and head capsule designs in the megadiverse insects in order to aid our understanding of insect head capsule and mouthpart evolution under mechanical constraints. Summary: A musculoskeletal model of the mandible–muscle complex for dragonflies is developed in order to understand the mechanical and evolutionary significance of single muscles within this system.

Sprint start kinetics of amputee and non-amputee sprinters

The purpose of this study was to explore the relationship between the forces applied to the starting blocks and the start performances (SPs) of amputee sprinters (ASs) and non-amputee sprinters (NASs). SPs of 154 male and female NASs (100-m personal records [PRs], 9.58–14.00 s) and 7 male ASs (3 unilateral above knee, 3 unilateral below knee, 1 bilateral below knee; 100 m PRs, 11.70–12.70 s) with running specific prostheses (RSPs) were analysed during full-effort sprint starts using instrumented starting blocks that measured the applied forces in 3D. Using the NAS dataset and a combination of factor analysis and multiple regression techniques, we explored the relationship between force characteristics and SP (quantified by normalized average horizontal block power). Start kinetics were subsequently compared between ASs and NASs who were matched based on their absolute 100 m PR and their 100 m PR relative to the world record in their starting class. In NASs, 86% of the variance in SP was shared with five latent factors on which measured parameters related to force application to the rear and front blocks and the respective push-off directions in the sagittal plane of motion were loaded. Mediolateral force application had little influence on SP. The SP of ASs was significantly reduced compared to that of NASs matched on the basis of relative 100-m PR (−33.8%; d = 2.11, p < 0.001), while a non-significant performance reduction was observed when absolute 100-m PRs were used (−17.7%; d = 0.79, p = 0.09). These results are at least partially explained by the fact that force application to the rear block was clearly impaired in the affected legs of ASs.

Musculoskeletal modelling under an evolutionary perspective: deciphering the role of single muscle regions in closely related insects

Insects show a remarkable diversity of muscle configurations, yet the factors leading to this functional diversity are poorly understood. Here, we use musculoskeletal modelling to understand the spatio-temporal activity of an insect muscle in several dragonfly species and to reveal potential mechanical factors leading to a particular muscle configuration. Bite characteristics potentially show systematic signal, but absolute bite force is not correlated with size. Muscle configuration and inverse dynamics show that the wider relative area of muscle attachment and the higher activity of subapical muscle groups are responsible for this high bite force. This wider attachment area is, however, not an evolutionary trend within dragonflies. Our inverse dynamic data, furthermore, show that maximum bite forces most probably do not reflect maximal muscle force production capability in all studied species. The thin head capsule and the attachment areas of muscles most probably limit the maximum force output of the mandibular muscles.

Identification and risk estimation of movement strategies during cutting maneuvers

OBJECTIVES Approximately 70% of anterior cruciate ligament (ACL) injuries occur in non-contact situations during cutting and landing maneuvers. Parameters such as footstrike patterns and trunk orientation were found to influence ACL relevant knee loading, however, the relationship between the whole body movement and injury risk is debated. This study identifies whole body movement strategies that increase injury risk, and provides training recommendations to reduce this risk or enable a save return to sports after injury. DESIGN Experimental cross-sectional study design. METHODS Three dimensional movement analysis was carried out to investigate 50 participants performing anticipated 90° cutting maneuvers. To identify and characterize movement strategies, footstrike pattern, knee valgus moment, knee internal rotation moment, angle of attack, shoulder and pelvis axis were analyzed using statistical parametric mapping. RESULTS Three different movement strategies were identified. One strategy included rearfoot striking in combination with a relatively upright body position which generated higher knee joint loads than the second strategy, forefoot striking in combination with more backwards leaning and pre-rotation of the trunk towards the new movement direction. A third strategy combined forefoot striking with less preorientation which increased the ACL relevant knee joint load compared to the second strategy. CONCLUSIONS The identified movement strategies clearly pre-determine the injury risk during non-contact situations with the third strategy as the most unfavorable one. Compared to the study of isolated parameters, the analysis of the whole body movement allowed for detailed separation of more risky from less risky cutting strategies. These results give practical recommendations for the prevention of ACL injury.

Non-Sagittal Knee Joint Kinematics and Kinetics during Gait on Level and Sloped Grounds with Unicompartmental and Total Knee Arthroplasty Patients

After knee arthroplasty (KA) surgery, patients experience abnormal kinematics and kinetics during numerous activities of daily living. Biomechanical investigations have focused primarily on level walking, whereas walking on sloped surfaces, which is stated to affect knee kinematics and kinetics considerably, has been neglected to this day. This study aimed to analyze over-ground walking on level and sloped surfaces with a special focus on transverse and frontal plane knee kinematics and kinetics in patients with KA. A three-dimensional (3D) motion analysis was performed by means of optoelectronic stereophogrammetry 1.8 ± 0.4 years following total knee arthroplasty (TKA) and unicompartmental arthroplasty surgery (UKA). AnyBody™ Modeling System was used to conduct inverse dynamics. The TKA group negotiated the decline walking task with reduced peak knee internal rotation angles compared with a healthy control group (CG). First-peak knee adduction moments were diminished by 27% (TKA group) and 22% (UKA group) compared with the CG during decline walking. No significant differences were detected between the TKA and UKA groups, regardless of the locomotion task. Decline walking exposed apparently more abnormal knee frontal and transverse plane adjustments in KA patients than level walking compared with the CG. Hence, walking on sloped surfaces should be included in further motion analysis studies investigating KA patients in order to detect potential deficits that might be not obvious during level walking.

Elite long jumpers with below the knee prostheses approach the board slower, but take-off more effectively than non-amputee athletes

The use of technological aids to improve sport performance (‘techno doping’) and inclusion of Paralympic athletes in Olympic events are matters of ongoing debate. Recently, a long jumper with a below the knee amputation (BKA) achieved jump distances similar to world-class athletes without amputations, using a carbon fibre running-specific prosthesis (RSP). We show that athletes with BKA utilize a different, more effective take-off technique in the long jump, which provided the best athlete with BKA a performance advantage of at least 0.13 m compared to non-amputee athletes. A maximum speed constraint imposed by the use of RSPs would indicate a performance disadvantage for the long jump. We found slower maximum sprinting speeds in athletes with BKA, but did not find a difference in the overall vertical force from both legs of athletes with BKA compared to non-amputees. Slower speeds might originate from intrinsically lower sprinting abilities of athletes with BKA or from more complex adaptions in sprinting mechanics due to the biomechanical and morphological differences induced by RSPs. Our results suggest that due to different movement strategies, athletes with and without BKA should likely compete in separate categories for the long jump.

Compromised knee internal rotation in total knee arthroplasty patients during stair climbing

Due to the significant role of rotational properties for normal knee function, this study aimed to investigate transverse plane kinematics and kinetics in total knee arthroplasty and unicondylar knee arthroplasty patients during activities of daily living compared to a healthy control group, including stair ascent and descent. The study participants consisted of a total knee arthroplasty group including posterior cruciate retaining and posterior stabilized designs as well as a unicondylar knee arthroplasty group and a healthy control group. Three-dimensional kinematics and kinetics were captured using a Vicon system and two Kistler force plates embedded in the floor and another two in a staircase. Inverse dynamics of the lower limbs was computed in Anybody™ Modeling System. Transverse plane joint angles and joint moments were analyzed utilizing the statistical non-parametric mapping approach, considering the entire curve shape for statistical analysis. The patients with total knee arthroplasty exhibited significantly reduced knee internal rotation of the operated knee compared to the control group and the patients’ unimpaired limb, especially during the stair climbing tasks. Both unicondylar and total knee arthroplasty patients were found to have similar reduced internal rotation motion time series in stair descent. In conclusion, potential kinematic and kinetic benefits of unicondylar knee arthroplasty over total knee arthroplasty could not be proven in the current study. Aside from the usually mentioned reasons inducing constrained knee internal rotation in total knee arthroplasty patients, future studies should investigate to what extent co-contraction may contribute to this functional impairment in patients after knee arthroplasty surgery.

Belastungs- und Beanspruchungsanalyse

Die Belastungs- und Beanspruchungsanalyse ist eine notwendige Bedingung des Personalmanagements (vgl. Rohmert 1984). Um herauszufinden, welchen Belastungen die Mitarbeiter in einem Unternehmen ausgesetzt sind, bedarf es einer genauen Beschreibung der Charakteristiken, Konsequenzen und Auswirkungen der Arbeitstatigkeit. Die Belastungen des Arbeitsplatzes resultieren u.U. in einer sehr unterschiedlichen Beanspruchung des jeweiligen Mitarbeiters – in Abhangigkeit von individueller Konstitution und verfugbaren Ressourcen.

Does inside passing contribute to the high incidence of groin injuries in soccer? A biomechanical analysis

ABSTRACT Groin injuries are common in soccer and often cause time-loss from training. While groin injuries have been linked to full effort kicking, the role of inside passing is unclear. Therefore, the purpose of this study was to investigate hip joint kinematics and muscle force, stress and contraction velocity for adductor longus and gracilis during inside passing. 3D kinematics of ten soccer players (23.4 yrs; 77.5 kg; 1.81 m) were captured with a motion capture system inside a Footbonaut. Muscle force and contraction velocity were determined with AnyBody Modelling System. Gracilis muscle forces were 9% lower compared to adductor longus (p = 0.005), but muscle stress was 183% higher in gracilis (p = 0.005). Contraction velocity reveals eccentric contraction of gracilis in the last quarter of the swing phase. Considering the combination of eccentric contraction, high muscle stress and the repetitive nature of inside passing, gracilis accumulates high loads in matches and training. These results indicate that the high incidence of groin injuries in soccer could be linked to isolated pass training. Practitioners need to be aware of the risk and refrain from sudden increases in the amount of pass training. This gives the musculoskeletal system time to adapt and might avoid career threatening injuries.